StarTech.com

USB 3.0 naar 2-poorts gigabit Ethernet-adapter NIC met USB-poort

Voeg twee gigabit Ethernet-poorten en een USB 3.0 pass-through-poort toe aan uw laptop via één USB 3.0 poort

Productcode: USB32000SPT

  • Dubbele gigabit Ethernet-poorten via één USB-aansluiting
  • Geïntegreerde USB 3.0 pass-through-poort
  • Compatibele met IEEE 802.3, 802.3u en 802.3ab (10BASE-T, 100BASE-TX en 1000BASE-T)
Bekijk meer
  • Crossover-detectie en automatische aanpassing (Auto MDI/MDI-X)
  • Transparant voor IEEE 802.1Q VLAN-tagging
  • Tot 4K Jumbo Frame ondersteuning
  • Ondersteunt Checksum Offload (IPv4, IPv6, TCP, UDP) en Large Send Offload
  • Compacte en lichtgewicht uitvoering voor maximale draagbaarheid
€ 77,99 EUR exc BTW
€ 94,37 EUR inc BTW
Niet beschikbaar
Eventueel op voorraad bij partners
Waar te verkrijgen

Bezoek vandaag nog onze Europese online winkel voor meer producten zoals deze!

Overzicht

Met de USB32000SPT USB 3.0 naar 2-poorts gigabit Ethernet-adapter kunt u twee gigabit Ethernet-poorten toevoegen aan uw laptop of Ultrabook™-computer via één USB 3.0 poort. De adapter is uitgerust met een geïntegreerde USB 3.0 pass-through-poort, waardoor uw USB-poort beschikbaar blijft voor externe opslagapparaten of andere randapparatuur. Elke RJ45-poort ondersteunt 10/100/1000 Mbps Ethernet en voldoet volledig aan de IEEE 802/u/ab standaards.

Deze 2-poorts USB LAN-adapter is een veelzijdige oplossing voor het tegelijkertijd aansluiten van twee aparte fysieke netwerken, waardoor de 5 Gbps snelheid van USB 3.0 optimaal wordt benut voor een speciale gigabit-bandbreedte voor elke poort. De dubbele USB NIC kan ook prima worden gebruikt als speciale fysieke netwerkinterfaces naar virtuele machineconfiguraties. Een geweldige oplossing voor IT-beheerders die dual-homed of multi-homed hostsystemen nodig hebben.

De USB 3.0 NIC ondersteunt IPv4/IPv6 packet Checksum Offload Engine (COE) en TCP Large Send Offload om de belasting van uw CPU te verlagen, alsmede Jumbo Frames, full-duplex bediening met 802.3x datastroomregeling en VLAN tagging voor een efficiënte en met vele functies uitgeruste USB-netwerkadapter.

Gedekt door een StarTech.com 2-jarige garantie en gratis levenslange technische ondersteuning.

StarTech.com Voordeel

  • Maak tegelijkertijd verbinding met twee verschillende netwerken, via één USB 3.0 poort
  • Bewaar beschikbare USB 3.0 poorten met USB pass-through

Toepassingen

Zakenmensen of IT-professionals die een verbinding moeten leggen met twee verschillende netwerken tegelijk

Laat één of meer virtuele machines draaien op een werkstation, met toegang tot fysieke afzonderlijke netwerkverbindingen

Vervanging voor een defecte ingebouwde Gigabit Ethernet-poort op een laptop

Technische specificaties

Garantie
Garantie 2 Years
Hardware
Bus type USB 3.0
Chipsetcode ASIX - AX88179
VIA/VLI - VL811
Industriestandaarden IEEE802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3az
Interface RJ45 (gigabit Ethernet)
Poorten 2
Prestaties
Auto MDIX Ja
Compatibele netwerken 10/100/1000 Mbps
Full duplex ondersteuning Ja
Jumbo Frame Support 4K max.
Max. afstand 100 m / 330 ft
Maximale overdrachtsnelheid 5 Gbps (USB 3.0)
2 Gbps (Ethernet; full-duplex)
Type en snelheid USB 3.0 - 5 Gbit/s
Connector(en)
Type connector(en) 1 - USB Type-A (9-polig) USB 3.0 Mannelijk
1 - USB Type-A (9-polig) USB 3.0 Vrouwelijk
2 - RJ-45 Vrouwelijk
Software
Besturingssystemen Windows® XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016
Mac OS® 10.6 to 10.13 - VLAN tagging is currently not supported in Mac OS
Linux Kernel 2.6.25 to 4.11.x LTS Versions only
Speciale opmerkingen / vereisten
Systeem- en kabelvereisten Vrije USB-poort
Indicatoren
LED-indicatoren 1 - Gigabit koppeling/activiteit (geel)
2 - 10/100 Link/Activiteit (groen)
Voeding
Inclusief voedingsadapter Gevoed via USB
Gebruiksomgeving
Bedrijfstemperatuur 0°C to 50°C (32°F to 122°F)
Opslagtemperatuur -20°C to 60°C (-4°F to 140°F)
Vochtigheid 5% - 85% rel. luchtvochtigheid
Fysieke eigenschappen
Breedte product 60 mm [2.4 in]
Form Factor Aangesloten kabel
Gewicht product 59 g [2.1 oz]
Hoogte product 16 mm [0.6 in]
Kabellengte 203.2 mm [8 in]
Kleur Zwart
Lengte product 75 mm [3 in]
Type behuizing Kunststof
Verpakkingsinformatie
Verzendgewicht (verpakt) 145 g [5.1 oz]
Wat wordt er meegeleverd
Meegeleverd 1 - USB 3.0 dubbele netwerkadapter
1 - Driver-CD
1 - Handleiding

Compatibiliteit

Bekijk volledige OS compatibiliteit
Windows® XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016
Mac OS® 10.6 to 10.13 - VLAN tagging is currently not supported in Mac OS
Linux Kernel 2.6.25 to 4.11.x LTS Versions only

Certificaties

Verwante producten

USB 3.0 naar gigabit Ethernet-adapter NIC met USB-poort - wit
USB31000SPTW
USB 3.0 naar gigabit Ethernet-adapter NIC met USB-poort - wit

Voeg een gigabit Ethernet-poort en een USB 3.0 pass-through-poort toe aan uw laptop via één USB 3.0 poort

€ 45,99 exc BTW
€ 55,65 inc BTW
USB 3.0 naar gigabit Ethernet-adapter NIC met USB-poort - zwart
USB31000SPTB
USB 3.0 naar gigabit Ethernet-adapter NIC met USB-poort - zwart

Voeg een gigabit Ethernet-poort en een USB 3.0 pass-through-poort toe aan uw laptop via één USB 3.0 poort

€ 45,99 exc BTW
€ 55,65 inc BTW
USB 3.0 naar gigabit Ethernet NIC netwerkadapter met 3-poorts hub - wit
ST3300U3S
USB 3.0 naar gigabit Ethernet NIC netwerkadapter met 3-poorts hub - wit

Voeg gigabit Ethernet-verbinding en 3 USB 3.0-hubpoorten toe aan een computer via één SuperSpeed USB 3.0-poort

€ 69,99 exc BTW
€ 84,69 inc BTW
USB 3.0 naar gigabit Ethernet NIC netwerkadapter - wit
USB31000SW
USB 3.0 naar gigabit Ethernet NIC netwerkadapter - wit

Voeg Gigabit Ethernet-netwerkconnectiviteit toe aan een laptop of pc via een USB 3.0-poort

€ 32,99 exc BTW
€ 39,92 inc BTW
ExpressCard Ethernet Adapter Card for Gigabit Networks
EC1000S
1-Poort ExpressCard Gigabit Laptop Ethernet Netwerkkaart Adapter

Voeg Gigabit-netwerkconnectiviteit toe aan iedere laptop of desktopcomputer met ExpressCard

€ 58,99 exc BTW
€ 71,38 inc BTW
USB 3.0 naar Gigabit Ethernet Netwerkadapter
USB31000S
USB 3.0 naar Gigabit Ethernet Netwerkadapter

Voeg Gigabit Ethernet-netwerkconnectiviteit toe aan een laptop of pc via een USB 3.0-poort

€ 32,99 exc BTW
€ 39,92 inc BTW
Twee-poort ExpressCard Gigabit Laptop Ethernet Netwerkkaart Adapter
EC2000S
Twee-poort ExpressCard Gigabit Laptop Ethernet Netwerkkaart Adapter

Voeg 2 Gigabit Ethernet-poorten toe aan uw laptop via een enkele ExpressCard-slot

€ 203,99 exc BTW
€ 246,83 inc BTW
USB 3.0-naar-gigabit Ethernet NIC netwerkadapter – 10/100/1000 Mbps
USB31000NDS
USB 3.0-naar-gigabit Ethernet NIC netwerkadapter – 10/100/1000 Mbps

Voeg Gigabit Ethernet-netwerkconnectiviteit toe aan een laptop of pc via een USB 3.0-poort

€ 31,99 exc BTW
€ 38,71 inc BTW

Accessoires

Productondersteuning

Veelgestelde vragen (FAQ)

Installatie

Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).

To install the driver:

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
  2. Select the appropriate folder for your operating system.
  3. Right-click Setup.exe.
  4. Click Run as Administrator.

Note: If the Run as Administrator option is not available, you might be attempting to run the installer from within the zipped file. Extract the files using the instructions in Step 2.

  1. Follow the on-screen prompts to install the device drivers and restart the computer when prompted.
  2. Your computer will automatically complete the driver installation and your device should be ready to use.

Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).

To install the driver:

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Documents and Settings\your_name\My Documents\Downloads).

  1. Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
  2. Select the appropriate folder for your operating system.
  3. Double-click Setup.exe.
  4. Follow the on-screen prompts to install the device drivers and restart the computer when prompted.
  5. Your computer will automatically complete the driver installation and your device should be ready to use.

Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).

  1. Download the latest drivers from the StarTech.com website at http://www.startech.com/Support. The part number and product ID are on the product packaging.

Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. After the download is complete, right-click the zip folder that you downloaded, click Extract All, and complete the instructions.
  2. Press the Windows key + R, type devmgmt.msc, and press Enter to open the Device Manager.
  3. Right-click AX88179, which will have a “!” or “?” next to it to indicate a driver issue.
  4. Click Update Driver.
  5. Click Browse my computer for driver software.
  6. Select the Let me pick from a list of device drivers on my computer option.
  7. On the Select your device’s type from the list below screen, click Show All Devices, and click Next.

Note: The Select your device’s type from the list below screen does not appear on all systems. If you do not see this screen, skip this step.

  1. Select the Have Disk option.
  2. Browse to the AX88179\your_operating_system\Manual Drivers\ folder and open the 32-bit or the 64-bit folder, depending on your system type.

Note: To view your system type, click Start. Right-click Computer, and then click Properties.

  1. Click the Ax88179_178a file. Click OK, and then click Next.

Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).

  1. Download the latest drivers from the StarTech.com website at http://www.startech.com/Support. The part number and product ID are on the product packaging.

Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Documents and Settings\your_name\My Documents\Downloads).

  1. After the download is complete, right-click the zip folder that you downloaded, click Extract All, and complete the instructions.
  2. Press the Windows key + R, type devmgmt.msc, and press Enter to open the Device Manager.
  3. Right-click AX88179, which will have “!” or “?” next to it to indicate a driver issue.
  4. Click Update Driver.
  5. On the Hardware Update Wizard screen, click Install from a list or specific location (Advanced), and then click Next.
  6. Select the Don’t search, I will choose the driver to install option, and then click Next.
  7. On the Hardware Type screen, click Show All Devices, and then click Next.

Note: The Hardware Type screen does not appear on all systems. If you do not see this screen, skip this step.

  1. On the Select the Device Driver you want to install for this hardware screen, select the Have Disk option.
  2. In the Install from Disk dialog box, click Browse.
  3. Browse to the AX88179\your_operating_system\Manual Drivers\ folder and open the 32-bit or the 64-bit folder, depending on your system type.

Note: To view your system type, click Start. Right-click Computer, and then click Properties.

  1. Click the Ax88179_178a file. Click OK, and then click Next.
  1. Download the latest drivers from the StarTech.com website at www.startech.com/Support. The part number and product ID are on the product packaging.

Note: Mac OS X usually saves the files to the Downloads folder that is associated with your user account and is located on the drive where Mac OS X is installed (for example, Macintosh HD\Users\your_name\Downloads).

  1. Double-click the [ASIX88179] Mac USB Network Adapter.zip file.
  2. Press and hold the Control key and click the dmg file.
  3. To mount a drive on the desktop, click Open.
  4. Double-click the drive that you just mounted on the desktop.
  5. Press and hold the Control key and click the setup file.
  6. Click Open.
  7. Complete the instructions to install the device drivers, and restart your computer when prompted to.
  8. After your computer restarts, connect the device to your computer.

Hoe gaat u te werk

StarTech.com does not support a Preboot Execution Environment (PXE) as this requires third-party software. However, our devices can be used as long as the following conditions are met:

  1. The BIOS must support PXE.
  2. The BIOS must see the card.
  3. The environment must have drivers for the chipset used in the card.
  4. If using a USB networking card, the environment must have support for USB devices as well.

To confirm that Windows detects your USB device, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Troubleshooting

When you troubleshoot issues with a network adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Ethernet cables
  • Network devices
  • Computer system

To test your setup components, try the following:

  • Use the Ethernet cables, network devices, and computer system in another setup to see if the problem is with the components or the setup.
  • Use different Ethernet cables, network devices, and a different computer system in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.
  • Use short cables when you are testing.

When you test the Ethernet cables, network devices, and computer system, it is recommended that you do the following:

If you are experiencing speed or connectivity issues, it is best to set a specific speed at half or full duplex in your settings.  You can set your network adapter to perform at a certain speed, but the device that the adapter is connected to (whether it is a router, switch, or computer) must also be able to perform at the same speed.

Note: You must log in as the local administrator before you continue.

To open Device Manager:

  • Press Windows key + R.
  • Type devmgmt.msc.
  • Click OK.
  1. Open the Networking adapters section.
  2. Right-click the network adapter that you want to change and select Properties.
  3. Click the Advanced tab.
  4. Scroll down to Speed & Duplex. By default, it is set to Auto-Negotiate. Select any of the speeds that you see in the list.
  5. Click OK and restart your computer.

If the USB device does not work after your computer has been in extended hibernation, it is likely that Windows has automatically turned off the USB Root hub to save power. 

The steps below outline how to configure the USB root hub to stay on during hibernation, to prevent this from happening.
 

Windows 10 / 8

  1. On your keyboard, press the Windows key + X and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows 7 / Vista

  1. Click the Start button and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows XP

  1. On your desktop, right-click the My Computer icon and select Properties.
  2. Click the Device Manager tab.
  3. Expand Universal Serial Bus controllers by clicking the arrow to the left of it.
  4. Right-click the first USB Root Hub device and select Properties.
  5. Click the Power Management tab.
  6. Clear the box next to Allow the computer to turn off this device to save power.
  7. Click OK to apply the setting.
  8. Repeat steps 4-7 for any remaining devices in the Universal Serial Bus Controllers section with “Root Hub” in the name.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.