StarTech.com

USB-C naar gigabit netwerkadapter - zilver

Gebruik deze strakke aluminium converter voor het toevoegen van een gigabit Ethernetpoort aan uw MacBook, Chromebook of laptop met USB Type-C

Productcode: US1GC30A

  • Voeg een gigabit Ethernet-netwerkverbinding toe aan uw computer via de USB-C poort
  • Gestroomlijnde zilveren finish past perfect bij uw MacBook, en elke laptop of Chromebook met een soortgelijke kleur
  • Thunderbolt 3 port compatible
Bekijk meer
  • Native stuurprogramma ondersteuning in Chrome OS, Mac OS 10.10, Windows 8.1 voor eenvoudige installatie
  • Rechtstreeks gevoed via de USB-poort
  • Compacte en lichtgewicht uitvoering voor maximale mobiliteit
  • Ondersteunt 10/100/1000 Mbps autodetectie
  • Compatibel met IEEE 802.3, 802.3u en 802.3ab
  • Ondersteunt IEEE 802.1Q VLAN-tagging
  • Ondersteunt Checksum en Large Send Offload
  • Tot 9K Jumbo Frame ondersteuning
  • Ondersteunt Wake-on-LAN
  • IEEE 802.3az energiezuinige Ethernet-ondersteuning
€ 46,99 EUR exc BTW
€ 56,86 EUR inc BTW

Overzicht

Nu kunt u gemakkelijk verbinding maken met een gigabit netwerk via de USB -C™ poort van uw laptop. Deze gigabit Ethernet (GbE) netwerkadapter biedt betrouwbare netwerkverbindingen - zelfs zonder stuurprogramma's te hoeven installeren.  De gestroomlijnde zilveren design past perfect bij uw MacBook, en elke laptop of Chromebook™ met een soortgelijke look.

Gestroomlijnd design en goede mobiliteit

Geproduceerd met een hoogwaardige aluminium behuizing met zilveren finish, past de netwerkadapter perfect bij uw MacBook, en elke laptop of Chromebook™ met een soortgelijke kleur. Door zijn compactheid en draagbaarheid is deze USB-netwerkadapter de ideale laptopaccessoire. U hoeft geen voedingsadapter meer mee te nemen om de adapter te gebruiken, omdat de adapter direct vanaf de USB-hostpoort wordt gevoed.

Eenvoudige installatie dankzij native stuurprogrammaondersteuning

Gebruiksklaar in een mum van tijd. Steek de adapter gewoon in de USB-C poort van uw laptop en maak verbinding met uw netwerk. De adapter-chipset biedt native stuurprogramma-ondersteuning in Chrome OS™, Mac OS 10.10 en Windows® 8.1.

Krachtige gigabit netwerkverbindingen

De USB Type-C™ netwerkadapter ondersteunt de volledige gigabit bandbreedte door de snelheid van USB 3.0 Gen 1 (5 Gbps) te benutten. U hebt toegang tot zeer grote bestanden via het netwerk met gigabitsnelheden.

Probleemloze verbindingen via USB-Type-C

De USB Type-C connector is kleiner en gemakkelijker te gebruiken dan vorige USB connectors. Dankzij het omkeerbare design kunt u deze connector in uw apparaten steken ongeacht welke kant omhoogwijst. Steek de kabel er telkens weer correct in - frustratie of beschadigde poorten behoren tot het verleden.

De US1GC30A wordt gedekt door een 2-jarige garantie en gratis levenslange technische ondersteuning van StarTech.com.

Toepassingen

Voeg een vaste netwerkverbinding toe aan uw USB-C laptop

Dankzij de zilveren finish is het de ideale accessoire voor uw MacBook, Chromebook of elke laptop met een soortgelijke kleur

Breid uw laptop of desktop uit met gigabit Ethernet-mogelijkheden zonder de computer te hoeven openen of een beschikbare uitbreidingssleuf te hoeven gebruiken

Sluit uw laptop aan op een gigabit netwerk - ideaal voor kleine bedrijven, kantoor aan huis, netwerkapplicaties voor afdelingen en netwerk gaming

Technische specificaties

Garantie
Garantie 2 Years
Hardware
Bus type USB 3.1 Gen 1
Chipsetcode Realtek - RTL8153
Industriestandaarden IEEE 802.3, 802.3u en 802.3ab
Interface RJ45 (gigabit Ethernet)
Poorten 1
Prestaties
Auto MDIX Ja
Compatibele netwerken 10/100/1000 Mbps
Full duplex ondersteuning Ja
Maximale kabellengte 1.5 cm [0.6 in]
Maximale overdrachtsnelheid 5 Gbps
Type en snelheid USB 3.0 - 5 Gbit/s
Connector(en)
Externe poorten 1 - RJ-45 Vrouwelijk
Type connector(en) 1 - USB Type-C (24-polig) USB 3.0 Mannelijk
Software
Besturingssystemen Windows® XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2016
Mac OS X® 10.7 to 10.13 VLAN tagging is currently not supported in Mac OS
Linux Kernel 2.6.25 to 4.11.x LTS Versions only
Speciale opmerkingen / vereisten
Systeem- en kabelvereisten Beschikbare USB Type-C poort
Voeding
Inclusief voedingsadapter Gevoed via USB
Gebruiksomgeving
Bedrijfstemperatuur 0°C to 70°C (32°F to 158°F)
Opslagtemperatuur -55°C to 125°C (-67°F to 257°F)
Vochtigheid 20% ~ 90% RV
Fysieke eigenschappen
Breedte product 24 mm [0.9 in]
Form Factor Aangesloten kabel
Gewicht product 34 g [1.2 oz]
Hoogte product 17 mm [0.7 in]
Kleur Zilver
Lengte product 65 mm [2.6 in]
Verpakkingsinformatie
Verzendgewicht (verpakt) 106 g [3.7 oz]
Wat wordt er meegeleverd
Meegeleverd 1 - USB-C naar GbE netwerkadapter

Compatibiliteit

Bekijk volledige OS compatibiliteit
Windows® XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2016
Mac OS X® 10.7 to 10.13 VLAN tagging is currently not supported in Mac OS
Linux Kernel 2.6.25 to 4.11.x LTS Versions only

Certificaties

Verwante producten

USB-C naar Gigabit Ethernet Netwerkadapter
US1GC30B
USB-C naar Gigabit Ethernet Netwerkadapter

Sluit een gigabit netwerk via de USB-C poort aan op uw computer.

€ 38,99 exc BTW
€ 47,18 inc BTW
USB 3.0 naar Gigabit Ethernet Netwerkadapter
USB31000S
USB 3.0 naar Gigabit Ethernet Netwerkadapter

Voeg Gigabit Ethernet-netwerkconnectiviteit toe aan een laptop of pc via een USB 3.0-poort

€ 32,99 exc BTW
€ 39,92 inc BTW
USB-C naar gigabit netwerkadapter - Wit
US1GC30W
USB-C naar gigabit netwerkadapter - Wit

Voeg een gigabit Ethernet-poort toe aan uw MacBook, Chromebook of laptop met USB Type-C

€ 38,99 exc BTW
€ 47,18 inc BTW

Accessoires

Productondersteuning

Drivers en downloads

Drivers:
Specificatieblad(en)

Veelgestelde vragen (FAQ)

Voor uw aanschaf

USB-C is a type of USB connector that is capable of supporting the following:

  • Data transfer speeds up to 10Gbps, if you use USB 3.1.
  • Bi-directional power delivery up to 100W, if both the USB host connection and the device support it.
  • Alternate modes, which deliver different types of data at different speeds. For example, DisplayPort Alternate Mode (DP Alt Mode).

If using Thunderbolt 3 over USB-C, the connection is capable of additional features. For example, Thunderbolt 3 is capable of 40Gbps of total bandwidth. For more information, refer to the following FAQ: https://www.startech.com/faq/thunderbolt-3-port-capabilities.

Not all USB-C ports or devices are capable of supporting all of the features listed above, or all of the features at the maximum capabilities. If you require a specific USB-C feature, your USB host connection, cables, and device must all support the feature that you require. For more information about whether your components support specific USB-C features, refer to the information provided by the manufacturers. 

Installatie

Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).

To install the driver:

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
  2. Select the appropriate folder for your operating system.
  3. Right-click Setup.exe. 
  4. Click Run as Administrator.

Note: If the Run as Administrator option is not available, you might be attempting to run the installer from within the zipped file. Extract the files using the instructions in Step 2.

  1. Follow the on-screen prompts to install the device drivers and restart the computer when prompted.
  2. Your computer will automatically complete the driver installation and your device should be ready to use.

Hoe gaat u te werk

StarTech.com does not support a Preboot Execution Environment (PXE) as this requires third-party software. However, our devices can be used as long as the following conditions are met:

  1. The BIOS must support PXE.
  2. The BIOS must see the card.
  3. The environment must have drivers for the chipset used in the card.
  4. If using a USB networking card, the environment must have support for USB devices as well.

To confirm that Windows detects your USB device, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

To confirm that the Mac OS detects your USB device, complete the following:

  1. Click the Apple icon.
  2. Click About This Mac.
  3. Click More Info or System Report.
  4. Under the appropriate heading, confirm that your USB device is listed and that there isn't an error. For example, a network card would be under Ethernet Cards.

You may need to refresh the System Information page after you plug in your device.  To do so, press Command R with the System Information page open.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Troubleshooting

When you troubleshoot issues with a network adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Ethernet cables
  • Network devices
  • Computer system

To test your setup components, try the following:

  • Use the Ethernet cables, network devices, and computer system in another setup to see if the problem is with the components or the setup.
  • Use different Ethernet cables, network devices, and a different computer system in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.
  • Use short cables when you are testing.

When you test the Ethernet cables, network devices, and computer system, it is recommended that you do the following:

Sometimes an on-board network interface card (NIC) conflicts with a new NIC.  In these cases it is best to disable the on-board NIC.

The best way to disable your on-board NIC is to go into your BIOS and disable it there if possible.  To do this, consult your motherboard manual.

You can also disable any NIC in Windows.  Here is how you do this:

First click Start, or, in Windows 10 and 8, hold down the Windows key and press X.  Then click Control Panel.

Windows 10

  1. Click Network and Internet.
  2. Click Network and Sharing Center.
  3. On the left, click Change adapter settings.
  4. Right-click the NIC that you would like to disable and select Disable.

Windows 8

  1. Click Network and Sharing Center.
  2. On the left, click Change adapter settings.
  3. Right-click the NIC that you would like to disable and select Disable.

Windows 7

  1. Click Network and Internet.
  2. Click Network and Sharing Center.
  3. On the left, click Change adapter settings.
  4. Right-click the NIC that you would like to disable and select Disable.

Windows Vista

  1. Click Network and Sharing Center.
  2. On the left, click Manage network connections.
  3. Right-click the NIC that you would like to disable and select Disable.

Windows XP

  1. Click Network Connections.
  2. Right-click the NIC that you would like to disable and select Disable.

If you are experiencing speed or connectivity issues, it is best to set a specific speed at half or full duplex in your settings.  You can set your network adapter to perform at a certain speed, but the device that the adapter is connected to (whether it is a router, switch, or computer) must also be able to perform at the same speed.

Note: You must log in as the local administrator before you continue.

To open Device Manager:

  • Press Windows key + R.
  • Type devmgmt.msc.
  • Click OK.
  1. Open the Networking adapters section.
  2. Right-click the network adapter that you want to change and select Properties.
  3. Click the Advanced tab.
  4. Scroll down to Speed & Duplex. By default, it is set to Auto-Negotiate. Select any of the speeds that you see in the list.
  5. Click OK and restart your computer.

If the USB device does not work after your computer has been in extended hibernation, it is likely that Windows has automatically turned off the USB Root hub to save power. 

The steps below outline how to configure the USB root hub to stay on during hibernation, to prevent this from happening.
 

Windows 10 / 8

  1. On your keyboard, press the Windows key + X and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows 7 / Vista

  1. Click the Start button and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows XP

  1. On your desktop, right-click the My Computer icon and select Properties.
  2. Click the Device Manager tab.
  3. Expand Universal Serial Bus controllers by clicking the arrow to the left of it.
  4. Right-click the first USB Root Hub device and select Properties.
  5. Click the Power Management tab.
  6. Clear the box next to Allow the computer to turn off this device to save power.
  7. Click OK to apply the setting.
  8. Repeat steps 4-7 for any remaining devices in the Universal Serial Bus Controllers section with “Root Hub” in the name.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.