StarTech.com

USB-stereo audio adapter externe geluidskaart met SPDIF digitale audio en stereo mic

Voeg een SPDIF digitale audio-uitgang en standaard 3,5 mm audio-/microfoonaansluitingen toe aan uw systeem via USB

Productcode: ICUSBAUDIO2D

  • 96 kHz / 24-bits hifi USB audio
  • S/PDIF digitale uitgang met AC3 (Dolby Digital) en DTS pass-through ondersteuning
  • 5.1 surround sound ondersteund (alleen Windows®)
Bekijk meer
  • 3,5 mm koptelefoon-/microfoonpoorten
  • 4-standen TRRS headset met microfoonondersteuning
  • Hardware volumeknop en EQ-boostschakelaar voor lage/hoge tonen
  • LED's voor weergave van bemonsteringsfrequentie
  • 40 cm USB-aansluitkabel
€ 41,99 EUR exc BTW
€ 50,81 EUR inc BTW

Overzicht

Met de ICUSBAUDIO2D externe USB-geluidskaart kunt u een S/PDIF digitale audio-uitgang en standaard 3,5 mm analoge audio-/microfoonaansluitingen toevoegen aan uw systeem via USB - een comfortabele manier om een interne geluidskaart te omzeilen of te vervangen zonder de computerbehuizing te moeten openen.

Voor thuisbioscoopgeluid biedt de USB DAC (digitale naar analoge converter) een 96 kHz / 24-bits bemonsteringsfrequentie voor zowel afspelen als opnemen, en een 3,5 mm S/PDIF-poort met ondersteuning van Dolby® digitaal 5.1 surround sound (AC3) en DTS® pass-through (NB: 5.1 surround sound wordt alleen ondersteund in Windows®).

Deze veelzijdige USB-audioadapter heeft een geïntegreerde 3,5 mm 4-standen TRRS-aansluiting voor uw koptelefoon of headset (koptelefoon/microfoon). En een gemakkelijke externe volumeregeling voor snelle aanpassingen, een hardware EQ switch ter versterking van lage of hoge tonen en een LED-statusbalk om de huidige bemonsteringsfrequentie weer te geven.

Gedekt door een StarTech.com 2-jarige garantie en gratis levenslange technische ondersteuning.

StarTech.com Voordeel

  • Voeg ondersteuning van surround sound van thuisbioscoopkwaliteit toe met de geïntegreerde digitale S/PDIF-uitgang
  • Vervang een interne geluidskaart eenvoudig door een compact extern USB-apparaat
  • Pas het geluid gemakkelijk aan met de externe volume- en EQ-regelaars

Toepassingen

Sluit uw computer aan op een thuisbioscoop-audio-ontvanger via S/PDIF, zonder de behuizing te hoeven openen

Voeg digitale audio-ondersteuning toe aan een Ultrabook™ of kleine-vormfactorsysteem zonder interne uitbreidingsmogelijkheden

Vervang of upgrade de geïntegreerde audio op een laptop of draagbare computer

Technische specificaties

Garantie
Garantie 2 Years
Hardware
Bus type USB 2.0
Chipsetcode VIA/VLI - VT1630A
Prestaties
Audiospecificaties 96 kHz / 24-bits bemonsteringsfrequentie

Ca. 91 dB SNR (A-weging)

16-100 ohm koptelefoonaansturing
Connector(en)
Type connector(en) 1 - 3,5 mm mini-jack (3 standen) Vrouwelijk
1 - 3,5 mm mini-jack (4 standen) Vrouwelijk
1 - 3,5 mm Mini-Toslink (SPDIF, optisch) Vrouwelijk
1 - USB Type-A (4-polig) USB 2.0 Mannelijk
Software
Besturingssystemen Windows® XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016
Mac OS X® 10.6 to 10.8
Speciale opmerkingen / vereisten
Notitie 5.1 surround sound uitgangssignaal wordt alleen ondersteund in Windows
Systeem- en kabelvereisten Vrije USB-poort
Indicatoren
LED-indicatoren 1 - Power
3 - Bemonsteringsfrequentie voor afspelen/opnemen
Voeding
Inclusief voedingsadapter Gevoed via USB
Gebruiksomgeving
Bedrijfstemperatuur 0°C to 60°C (32°F to 140°F)
Opslagtemperatuur 0°C to 70°C (32°F to 158°F)
Vochtigheid 10% - 90% rel. vochtigheid (niet-condenserend)
Fysieke eigenschappen
Breedte product 46 mm [1.8 in]
Gewicht product 40 g [1.4 oz]
Hoogte product 16 mm [0.6 in]
Kabellengte 406.5 mm [16 in]
Kleur Zwart
Lengte product 47 mm [1.9 in]
Type behuizing Kunststof
Verpakkingsinformatie
Verzendgewicht (verpakt) 119 g [4.2 oz]
Wat wordt er meegeleverd
Meegeleverd 1 - USB-stereoaudioadapter
1 - Software-CD
1 - Handleiding

Compatibiliteit

Bekijk volledige OS compatibiliteit
Windows® XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016
Mac OS X® 10.6 to 10.8

Certificaties

Verwante producten

7.1 USB Audio-adapter Externe Geluidskaart met SPDIF Digitale Audio
ICUSBAUDIO7D
7.1 USB Audio-adapter Externe Geluidskaart met SPDIF Digitale Audio

Maak van uw laptop of desktopcomputer een 7.1-kanaals home theater geluidsinstallatie

€ 45,99 exc BTW
€ 55,65 inc BTW
Virtuele 7.1 USB Stereo Audio Adapter Externe Geluidkaart
ICUSBAUDIO7
Virtuele 7.1 USB Stereo Audio Adapter Externe Geluidkaart

Maak van een USB-poort een virtuele 7.1-kanaals geluidskaart

€ 24,99 exc BTW
€ 30,24 inc BTW
USB naar Stereo Audio Adapter Geluidskaart
ICUSBAUDIO
USB naar Stereo Audio Adapter Geluidskaart

Maak van een USB-poort een stereo-geluidskaart

€ 20,99 exc BTW
€ 25,40 inc BTW
USB Stereo Audio Adapter Externe Geluidskaart
ICUSBAUDIOB
USB Stereo Audio Adapter Externe Geluidskaart

Voeg hoofdtelefoon- en microfoon-aansluitingen toe via USB

€ 20,99 exc BTW
€ 25,40 inc BTW

Productondersteuning

Drivers en downloads

Drivers:
Firmware
Handleiding:
Specificatieblad(en)

Veelgestelde vragen (FAQ)

Voor uw aanschaf

Four-position audio cables, connectors, and adapters come in two different wiring standards: CTIA and OMTP. The four-position standard is more commonly referred to as Tip Ring Ring Sleeve (TRRS).

All StarTech.com TRRS audio cables, connectors, and adapters conform to the CTIA standard. Some OMTP audio devices can detect which pinout is being used and switch to the CTIA standard, but not all audio devices can do this.

The CTIA pinout is as follows:

Tip Left Audio
Ring 1 Right Audio
Ring 2 Ground
Sleeve Microphone

Installatie

Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).

  1. Download the latest drivers from the StarTech.com website at http://www.startech.com/Support. The part number and product ID are on the product packaging.

Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. After the download is complete, right-click the zip folder that you downloaded, click Extract All, and complete the instructions.
  2. In the list of extracted files, right-click the Setup.exe file and click Run as Administrator.

Note: If the Run as Administrator option is not available, you might be attempting to run the installer from within the zipped file. Complete the instructions in step 2 to extract the files.

  1. Complete the instructions to install the device drivers, and restart your computer when prompted to.
  2. After your computer restarts, connect the USB sound card to your computer.

Your computer automatically finishes installing the driver and your device should be ready to use.

Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).

  1. Download the latest drivers from the StarTech.com website at http://www.startech.com/Support. The part number and product ID are on the product packaging.

Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Documents and Settings\your_name\My Documents\Downloads).

  1. After the download is complete, right-click the zip folder that you downloaded, click Extract All, and complete the instructions.
  2. In the list of extracted files, double-click the Setup.exe file.
  3. Complete the instructions to install the device drivers, and restart your computer when prompted to.

Your computer automatically finishes installing the driver and your device should be ready to use.

Hoe gaat u te werk

To confirm that Windows detects your USB device, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

To confirm that the Mac OS detects your USB device, complete the following:

  1. Click the Apple icon.
  2. Click About This Mac.
  3. Click More Info or System Report.
  4. Under the appropriate heading, confirm that your USB device is listed and that there isn't an error. For example, a network card would be under Ethernet Cards.

You may need to refresh the System Information page after you plug in your device.  To do so, press Command R with the System Information page open.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Troubleshooting

If the USB device does not work after your computer has been in extended hibernation, it is likely that Windows has automatically turned off the USB Root hub to save power. 

The steps below outline how to configure the USB root hub to stay on during hibernation, to prevent this from happening.
 

Windows 10 / 8

  1. On your keyboard, press the Windows key + X and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows 7 / Vista

  1. Click the Start button and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows XP

  1. On your desktop, right-click the My Computer icon and select Properties.
  2. Click the Device Manager tab.
  3. Expand Universal Serial Bus controllers by clicking the arrow to the left of it.
  4. Right-click the first USB Root Hub device and select Properties.
  5. Click the Power Management tab.
  6. Clear the box next to Allow the computer to turn off this device to save power.
  7. Click OK to apply the setting.
  8. Repeat steps 4-7 for any remaining devices in the Universal Serial Bus Controllers section with “Root Hub” in the name.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

When you troubleshoot issues with a sound card, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Stereo audio cables

  • Speakers or headsets

  • Sound card

To test your setup components, try the following:

  • Use the stereo audio cables, speakers or headsets, and sound card in another setup to see if the problem is with the components or the setup.

  • Use a different set of stereo audio cables, speakers or headphones, and sound card in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the speakers or headsets and sound card, it is recommended that you do the following:

To check the default playback device on a computer that is running a version of Windows XP, do the following:

  1. Click Start.
  2. Click Control Panel.
  3. Click Sound and Audio Devices.
  4. Click the Audio tab.
  5. In the Default device drop-down menu, click the sound card.

To check the default playback device on a computer that is running a version of Windows Vista or Windows 7, do the following:

  1. Click Start.
  2. Click Control Panel.
  3. Click Hardware and Sound.
  4. Click Sound.
  5. On the Playback tab, right-click the sound card and click Set as Default Device.

To check the default playback device on a computer that is running a version of Windows 8, do the following:

  1. Press the Windows key + X.
  2. Click Control Panel.
  3. Click Hardware and Sound.
  4. Click Sound.
  5. Click the Audio tab.
  6. On the Playback tab, right-click the sound card and click Set as Default Device.