StarTech.com

2-Poort ExpressCard 54mm eSATA II Controller Adapter - Inbouw

Voeg 2 eSATA-poorten voor inbouw toe aan een laptop via een ExpressCard/54-slot

Productcode: ECESATA254F

  • Uniek slank ExpressCard/54 inbouwsysteem met 54mm-vormfactor
  • Twee onafhankelijke eSATA-kanalen
  • Volledig compatibel met SATA 150 / SATA 300 harde schijven, solid state drives en optische drives
Bekijk meer
  • Ondersteuning voor FIS-based port-multiplier-functionaliteit
  • Ondersteuning voor SATA-schijven met grote capaciteit door middel van 48-bit LBA
  • Ondersteunt Legacy Command Queuing (LCQ) en Native Command Queuing (NCQ)
  • Voldoet aan de PCI Express-specificatie rev. 1.0a
  • Plug-and-play en hot-swappable
€ 35,99 EUR exc BTW
€ 43,55 EUR inc BTW
Op voorraad bij onze partners:
Waar te verkrijgen

Overzicht

De ECESATA254F 2-poort eSATA ExpressCard-adapter voor inbouw heeft een unieke, smalle 54mm vormfactor die ervoor zorgt dat het zonder uit te steken in een standaard 54mm ExpressCard-slot van een laptop kan worden geplaatst. De poorten van de adapter liggen na inbouw vlak met de zijkant van de laptop, en dat maakt het tot een onopvallend accessoire die men te allen tijde kan laten zitten zonder angst dat de kaart of de sleuf zal worden beschadigd door stoten of blijven haken. De eSATA ExpressCard-adapter is voorzien van 2 onafhankelijke eSATA-poorten en is compatibel met de nieuwste SATA-schijven met hoge capaciteit (SATA I, SATA II) en biedt ondersteuning voor overdrachtsnelheden tot 3 Gbit/s. De eSATA ExpressCard ondersteunt Port Multiplier-functionaliteit en hot-swapping en zorgt ervoor dat compatibele multi-drive behuizingen kunnen worden aangesloten via een enkele eSATA-kabel, en dat apparaten kunnen worden aangesloten en losgekoppeld zonder dat het systeem opnieuw hoeft te worden opgestart.

StarTech.com Voordeel

  • Het unieke 54mm-inbouwontwerp past naadloos in ExpressCard/54-slots, zodat het geïnstalleerd kan blijven zonder zich zorgen te hoeven maken voor stoten of blijven haken van de kaart
  • Port-multiplier-functionaliteit en 48-bits LBA-ondersteuning betekent dat multi-drive behuizingen en schijven met grote capaciteit naar behoren werken
  • Met 2-jaar garantie en gratis levenslange technische ondersteuning door StarTech.com

Toepassingen

Voeg snelle eSATA-connectiviteit toe aan een laptop zonder ingebouwde eSATA-poorten

Sluit eSATA-apparatuur zoals externe harde schijven en optische drives aan met echte SATA-snelheden

Technische specificaties

Garantie
Garantie 2 Years
Hardware
Bus type ExpressCard
Chipsetcode Silicon Image - SiI3132
Interface eSATA
Kaarttype 54mm ExpressCard
Poorten 2
Prestaties
Maximale overdrachtsnelheid 3,0 Gbit/s
Port-multiplier Ja
RAID Nee
Type en snelheid SATA II (3 Gbps)
Connector(en)
Externe poorten 2 - eSATA (7-polig, data) Stekker
Type connector(en) 1 - ExpressCard (54mm)
Software
Besturingssystemen Windows® 2000, XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012
Mac OS X® 10.6 to 10.11
Linux 3.5.x to 4.4.x LTS Versions only
Speciale opmerkingen / vereisten
Systeem- en kabelvereisten ExpressCard/54-slot
Voeding
Inclusief voedingsadapter Niet meegeleverd (niet vereist voor standaardapplicaties)
Gebruiksomgeving
Bedrijfstemperatuur 0°C to 70°C (32°F to 158°F)
Opslagtemperatuur -65°C to 150°C (-85°F to 302°F)
Fysieke eigenschappen
Breedte product 54 mm [2.1 in]
Gewicht product 22.5 g [0.8 oz]
Hoogte product 5 mm [0.2 in]
Lengte product 75 mm [3 in]
Verpakkingsinformatie
Verpakkingsaantal 1
Verzendgewicht (verpakt) 88 g [3.1 oz]
Wat wordt er meegeleverd
Meegeleverd 1 - eSATA ExpressCard
1 - Driver-CD
1 - Handleiding

Compatibiliteit

Bekijk volledige OS compatibiliteit
Windows® 2000, XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012
Mac OS X® 10.6 to 10.11
Linux 3.5.x to 4.4.x LTS Versions only

Certificaties

Verwante producten

2 Port CardBus eSATA Laptop Controller Adapter Card
CBESAT2
2 Port CardBus eSATA Laptop Controller Adapter Card

Voeg 2 eSATA-poorten toe aan een laptop via een CardBus-slot

€ 9,99 exc BTW
€ 12,09 inc BTW
PCI Express eSATA II Controller Card
PEXESATA1
1-poort PCI Express eSATA II Controllerkaart

Voeg een eSATA-poort toe aan een computer via een PCI Express-slot

€ 7,99 exc BTW
€ 9,67 inc BTW
2-poort PCI Express eSATA Controller/Adapter-kaart
PEXESATA2
2-poort PCI Express eSATA Controller/Adapter-kaart

Voeg 2 eSATA-poorten toe aan uw desktopcomputer via een PCI Express uitbreidingsslot

€ 25,99 exc BTW
€ 31,45 inc BTW
2-poort SATA 6 Gbit/s PCI Express eSATA Controllerkaart
PEXESAT32
2-poort SATA 6 Gbit/s PCI Express eSATA Controllerkaart

Voeg twee SATA 6Gbit/s eSATA-poorten toe voor high-speed toegang tot omvangrijke externe opslagmedia

€ 43,99 exc BTW
€ 53,23 inc BTW
PCI SATA Controller Card (1 Port eSATA + 1 Port SATA) w/ Low Profile Bracket
PCIESATA2I
1-poort eSATA + 1-poort SATA PCI SATA Controller-kaart met LP-bracket

Voeg een interne SATA-poort en een externe SATA-poort (eSATA) toe aan uw desktopcomputer via een PCI-uitbreidingsslot

€ 31,99 exc BTW
€ 38,71 inc BTW

Accessoires

Productondersteuning

Drivers en downloads

Drivers:
Handleiding:
Specificatieblad(en)

Veelgestelde vragen (FAQ)

Voor uw aanschaf

Although you can adapt a Serial Attached SCSI (SAS) drive to connect to a standard SATA controller card, the card must support SAS commands in order to communicate with SAS drives. SAS drives have a different command set that is not present on SATA controllers.

This SATA controller card only supports standard SATA drives.

This device does not support the ATA Packet Interface (ATAPI) protocol. ATAPI is required for optical drives, including CD-ROM drives, DVD-ROM drives, and Blu-ray players. Because this device does not support ATAPI, optical drives are also not supported over any IDE, SATA, or eSATA connections.

For a list of products that do support ATAPI, refer to the following FAQ: https://www.startech.com/faq/hard_drive_controllers_atapi_support.

Installatie

Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).

  1. Download the latest drivers from the StarTech.com website at www.startech.com/Support. The part number and product ID are on the product packaging.

Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. After the download is complete, right-click the zip folder that you downloaded, click Extract All, and complete the instructions.
  2. Press the Windows key + R, type devmgmt.msc, and press Enter to open the Device Manager.
  3. Right-click SCSI and RAID Controllers, which will have a “!” or “?” next to it to indicate a driver issue.
  4. Click Update Driver.
  5. Click Browse my computer for driver software.
  6. Select the Let me pick from a list of device drivers on my computer option.
  7. On the Select your device’s type from the list below screen, click Show All Devices, and click Next.

Note: The Select your device’s type from the list below screen does not appear on all systems. If you do not see this screen, skip this step.

  1. Select the Have Disk option.
  2. Browse to the extracted folder from Step 2.
  3. Open the Windows folder.
  4. Open the Manual Drivers folder.
  5. Open the folders as appropriate for your system type and hardware.

Note: To view your system type, click Start. Right-click Computer, and then click Properties.

  1. Click the SI3132.inf file. Click OK, and then click Next. Additional device listings will appear in Device Manager.
  2. Complete steps 4 to 11 for each of the new device listings.

Hoe gaat u te werk

To confirm that Windows detects your expansion card, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

To confirm that the Mac OS detects your expansion card, complete the following:

  1. In the upper-left screen, click the Apple icon.
  2. Click About This Mac.
  3. Click More Info or System Report.
  4. Under the appropriate heading, confirm that your expansion card is listed and that there isn't an error. For example, a network card would be under Ethernet Cards.

You may need to refresh the System Information page after you plug in your device.  To do so, press Command + R with the System Information page open.

Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

In order to use a hard drive plugged into a hard drive controller card as your operating system, you need to install the operating system onto the hard drive while it is plugged into the expansion card. To do this, complete the following:

Note: Not all hard drive controller cards have drivers that allow you to install the operating system onto the hard drive. All of the hard drive controllers that display this FAQ include this capability.

Before you begin, consult the documentation that came with the motherboard to make sure that the motherboard or BIOS supports booting from an expansion card.

  1. Back up any data on the hard drive.
  2. Make a copy of the drivers from the website onto a floppy disc, CD, DVD, or USB flash drive. The drivers that you download depends on the operating system that you want to install.
  3. Install the hard drive controller card onto your motherboard.
  4. Plug the hard drive into the controller card.
  5. Turn on your computer and open the operating system install wizard.
  6. Before you select the hard drive that you want to install the operating system onto, select the option to install third-party drivers.
  7. Point the driver installer to the floppy disc, CD, DVD, or USB flash drive.
  8. Install the drivers.
  9. Select the hard drive on the hard drive controller card as the location where you want to install the operating system.
  10. Complete the on-screen instructions to finish installing the operating system.

Troubleshooting

When you troubleshoot issues with a hard drive controller card, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • IDE, SATA, and eSATA cables

  • Hard drives

  • Hard drive controller card

To test your setup components, try the following:

  • Use the IDE, SATA, or eSATA cable, hard drive, and hard drive controller card in another setup to see if the problem is with the components or the setup.

  • Use a different IDE, SATA, or eSATA cable, hard drive, and hard drive controller card in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the hard drive and hard drive controller card, it is recommended that you do the following:

  1. To open the Device Manager, press the Windows key + R, type devmgmt.msc, and press Enter. Check the IDE ATA/ATAPI controllers (for IDE) section, or the Storage controllers (for SATA) section.

  2. Do one of the following:

Note: Formatting a hard drive erases all of the data on it. Make sure that you back up all of your data before you reformat the hard drive.

  1. To check Disk Management, press the Windows key + R, type diskmgmt.msc, and press Enter. Check to see if your hard drive is listed.

  2. If the hard drive is listed as healthy but does not have a drive letter, for example, C:, right-click healthy and click Change Drive Letter and Paths. Click Add, assign a drive letter, and click OK.

Note: A formatted hard drive does not show up in Computer or My Computer until it has a drive letter assigned to it.