StarTech.com

Professionele USB naar 2 Seriële Poort Adapter Hub met COM-behoud

Voeg twee RS-232 seriële poorten toe aan uw desktopcomputer of laptop via USB

Productcode: ICUSB2322X

  • 2-poort USB naar RS232 seriële adapter
  • Robuuste metalen constructie
  • Wandmontage mogelijk
Bekijk meer
  • COM-poort toewijzing blijft behouden ook na een reboot
  • Overdrachtsnelheden tot 230 kbit/s
  • Optionele voedingsaansluiting via DC-plug of aansluitblok
  • Gevoed via de USB-poort - geen externe voedingsadapter vereist
  • Ontworpen voor een snelle en eenvoudige uitbreiding met een seriële poort
  • Beschikt over dubbele buffers voor upstream en downstream dataverkeer
  • Automatische handshake-functionaliteit
  • In- en uitschakelen van opsommingen
€ 55,99 EUR exc BTW
€ 67,75 EUR inc BTW

Overzicht

De ICUSB2322X Professionele 2-poort USB Seriële Adapter zet een USB-poort om naar twee RS232 seriële poorten zodat u uw seriële apparaten kunt aansluiten en besturen. Robuuste metalen uitvoering en stevige muurbeugels zorgen voor een solide oplossing voor zowel ruwe industriële omgevingen en eenvoudige desktopinstallaties.

Het apparaat wordt via USB gevoed en heeft voor de meeste toepassingen geen externe voeding nodig. Voor installaties die meer vermogen via de RS232-poorten vereisen ondersteunt de hub het aansluiten van een externe voedingsadapter (niet meegeleverd) op de geïntegreerde DC-aansluiting of het aansluitblok. Zodra de adapter eenmaal is aangesloten, behoudt deze de waarden van de toegewezen seriële COM-poorten, waardoor dezelfde waarden door de adapter automatisch weer aan de poorten worden toegewezen in het geval deze worden losgekoppeld en opnieuw op de computer worden aangesloten.

Deze innovatieve adapter biedt een professionele oplossing voor het aansluiten van oudere of industriële RS232 seriële apparaten op moderne computers of computers met ongebruikte USB-poorten – ideaal voor het aansluiten van seriële modems, barcodescanners of elk apparaat met seriële synchronisatie via USB, waardoor u de kosten bespaart van het alleen wegens USB-compatibiliteit moeten upgraden van een serieel randapparaat.

Met 2 jaar garantie en gratis levenslange technische ondersteuning door StarTech.com.

StarTech.com Voordeel

  • Beschikt over meerdere poorten voor de aansturing van verschillende seriële apparaten tegelijk
  • Robuuste, volledig metalen behuizing voor extra duurzaamheid in ruwe omgevingen
  • Eenvoudige plug-and-play installatie en via USB gevoed – geen voedingsadapter vereist

Toepassingen

Perfect voor IT-beheerders die legacy-functionaliteit toe willen voegen aan moderne notebooks, pc's en servers die niet zijn voorzien van een geïntegreerde RS232-poort

Sluit industriële of voertuigsensoren en -apparatuur aan (bewaking en beveiliging)

Sluit barcodescanners, bonprinters en andere kassa-apparatuur aan

Sluit een satellietontvanger, serieel modem of PDA met seriële synchronisatie aan

Gebruik en programmeer LED- en narrowcasting-schermen via seriële communicatiepoorten

Technische specificaties

Garantie
Garantie 2 Years
Hardware
Bus type USB 2.0
Chipsetcode Texas Instruments - TIUSB3410
Interface Serieel
Poorten 2
Poorttype Externe hub
Prestaties
FIFO 32 Bytes
Max. baudrate 230,4 Kbps
Seriële protocol RS-232
Connector(en)
Externe poorten 2 - DB-9 (9-polig, D-Sub) Mannelijk
Type connector(en) 1 - USB B (4-polig) Vrouwelijk
Software
Besturingssystemen Windows® XP, Vista, 7, 8
Windows Server® 2003, 2008 R2, 2012, 2016
Voeding
Inclusief voedingsadapter Niet meegeleverd (niet vereist voor standaardapplicaties)
Ingangsspanning 9 ~ 36 DC
Stekkertype N
Gebruiksomgeving
Bedrijfstemperatuur -10°C to 80°C (14°F to 176°F)
Opslagtemperatuur -20°C to 100°C (-4°F to 212°F)
Vochtigheid 5~85% RH
Fysieke eigenschappen
Breedte product 80 mm [3.1 in]
Gewicht product 300 g [10.6 oz]
Hoogte product 23 mm [0.9 in]
Kleur Zwart
Lengte product 113 mm [4.4 in]
Type behuizing Staal
Verpakkingsinformatie
Verzendgewicht (verpakt) 0.5 kg [1 lb]
Wat wordt er meegeleverd
Meegeleverd 1 - USB naar RS-232 Seriële Adapter
1 - 91cm lange USB-kabel van A naar B
1 - Driver-CD
1 - Handleiding

Compatibiliteit

Bekijk volledige OS compatibiliteit
Windows® XP, Vista, 7, 8
Windows Server® 2003, 2008 R2, 2012, 2016

Certificaties

Verwante producten

Professionele USB naar 2 Seriële Poort Adapter Hub met COM-behoud
ICUSB2322X
Professionele USB naar 2 Seriële Poort Adapter Hub met COM-behoud

Voeg twee RS-232 seriële poorten toe aan uw desktopcomputer of laptop via USB

€ 55,99 exc BTW
€ 67,75 inc BTW
USB to RS232 DB9 Serial Adapter Cable with COM Retention
ICUSB232PRO
Korte USB naar RS232 Seriële DB9 Adapterkabel met COM-behoud

Voeg een RS-232 seriële poort toe aan uw desktopcomputer of laptop via USB; behoud de COM-poort

€ 27,99 exc BTW
€ 33,87 inc BTW

Accessoires

Productondersteuning

Veelgestelde vragen (FAQ)

Installatie

Some driver installation packages may require you to disable driver signature enforcement in Windows 8, which will allow unsigned driver packages to be installed on your system.

Note: Before you continue, save any open documents and close all open programs.

To disable driver signature enforcement, complete the following:

  1. Press the Windows key + C.
  2. Click Settings > Change PC Settings.
  3. In the left pane, click General.
  4. In the right pane, under Advanced startup, click Restart now.

When your system finishes restarting, complete the following:

  1. Click Troubleshoot > Advanced options > Startup Settings > Restart.
  2. Press 7.

When your computer restarts, driver signature enforcement will be disabled and you can install your drivers.

Note: When you restart your computer after you install your drivers, driver signature enforcement will be enabled again. This does not prevent your newly installed drivers from working, but does prevent any other unsigned drivers from being installed until driver signature enforcement is disabled.

Some driver installation packages may require you to disable driver signature enforcement in Windows 8.1, which will allow unsigned driver packages to be installed on your system.

Note: Before you continue, save any open documents and close all open programs.

To disable driver signature enforcement, complete the following:

  1. Press the Windows key + C.
  2. Click Settings > Change PC Settings.
  3. In the left pane, click Update & Recovery.
  4. In the left pane, click Recovery.
  5. Under Advanced startup, click Restart now.

When your system finishes restarting, complete the following:

  1. Click Troubleshoot > Advanced options > Startup Settings > Restart.
  2. Press 7.

When your computer restarts, driver signature enforcement will be disabled and you can install your drivers.

Note: When you restart your computer after you install your drivers, driver signature enforcement will be enabled again. This does not prevent your newly installed drivers from working, but does prevent any other unsigned drivers from being installed until driver signature enforcement is disabled.­­­­­­­

Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).

  1. Download the latest drivers from the StarTech.com website at http://www.startech.com/Support. The part number and product ID are on the product packaging.

Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. After the download is complete, right-click the zip folder that you downloaded, click Extract All, and complete the instructions.
  2. Press the Windows key + R, type devmgmt.msc, and press Enter to open the Device Manager.
  3. Right-click StarTech.com Adapter, which will have a “!” or “?” next to it to indicate a driver issue.
  4. Click Update Driver.
  5. Click Browse my computer for driver software.
  6. Select the Let me pick from a list of device drivers on my computer option.
  7. On the Select your device’s type from the list below screen, click Show All Devices, and click Next.

Note: The Select your device’s type from the list below screen does not appear on all systems. If you do not see this screen, skip this step.

  1. Select the Have Disk option.
  2. Browse to the Drivers folder and open the 32-bit or 64-bit folder.

Note: To view your system type, click Start. Right-click Computer, and then click Properties.

  1. Click the usbuart3410 file. Click OK, and then click Next.

If the installation is not successful, repeat steps 4 to 11 and click the usbuart3410b file.

Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).

  1. Download the latest drivers from the StarTech.com website at http://www.startech.com/Support. The part number and product ID are on the product packaging.

Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Documents and Settings\your_name\My Documents\Downloads).

  1. After the download is complete, right-click the zip folder that you downloaded, click Extract All, and complete the instructions.
  2. Press the Windows key + R, type devmgmt.msc, and press Enter to open the Device Manager.
  3. Right-click StarTech.com Adapter, which will have “!” or “?” next to it to indicate a driver issue.
  4. Click Update Driver.
  5. On the Hardware Update Wizard screen, click Install from a list or specific location (Advanced), and then click Next.
  6. Select the Don’t search, I will choose the driver to install option, and then click Next.
  7. On the Hardware Type screen, click Show All Devices, and then click Next.

Note: The Hardware Type screen does not appear on all systems. If you do not see this screen, skip this step.

  1. On the Select the Device Driver you want to install for this hardware screen, select the Have Disk option.
  2. In the Install from Disk dialog box, click Browse.
  3. Browse to the Driver folder and open the 32-bit or the 64-bit folder, depending on your system type.

Note: To view your system type, click Start. Right-click Computer, and then click Properties.

  1. Click the usbuart3410 file. Click OK, and then click Next.

If the installation is not successful, repeat steps 4 to 12 and click the usbuart3410b file.

Hoe gaat u te werk

To confirm that Windows detects your USB device, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Troubleshooting

When you troubleshoot issues with a serial device, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Serial cables

  • Serial ports

  • Serial devices

To test your setup components, try the following:

  • Use the serial cable, serial port, and serial device in another setup to see if the problem is with the components or the setup.

  • Use a different serial cable, serial port, and serial device in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the serial ports and serial device, it is recommended that you do the following:

Note: Some serial devices work only if the COM port number is between a certain range. For example, COM1 to COM4.

To check whether or not an RS-232 serial port is working, perform an RS-232 loopback test by doing the following:

  1. If your serial port is not female, convert it by taking a female/female cable or gender changer and plugging it into the serial port.
  2. Take a metal paperclip or wire and cross pins 2 and 3. If you look closely at the female end, the pins should be numbered.
  3. Open a telnet session on the COM port number of the device that you are testing. To find out the COM port number, refer to the following FAQ: https://www.startech.com/faq/com-port-listing-windows.

Note: To open a telnet session on the COM port, you need a telnet client like PuTTY or Hyper Terminal. Windows XP comes with Hyper Terminal.

  1. When the session is open, anything you type into it you should see. The loopback test fails when you cannot see what you are typing.

If the loopback test fails, make sure that the serial cable or gender changer that you are using works and that the adapter is in the correct port. 

You can check multiple ports at the same time by opening multiple sessions, putting the loopback adapter on one port, and trying to type into each session.  When you can see what you are typing, you know that the COM port is working and you can see which port number the physical serial port is. Close the window for the port that you just tested to speed up the testing of the remaining serial ports.

If the USB device does not work after your computer has been in extended hibernation, it is likely that Windows has automatically turned off the USB Root hub to save power. 

The steps below outline how to configure the USB root hub to stay on during hibernation, to prevent this from happening.
 

Windows 10 / 8

  1. On your keyboard, press the Windows key + X and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows 7 / Vista

  1. Click the Start button and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows XP

  1. On your desktop, right-click the My Computer icon and select Properties.
  2. Click the Device Manager tab.
  3. Expand Universal Serial Bus controllers by clicking the arrow to the left of it.
  4. Right-click the first USB Root Hub device and select Properties.
  5. Click the Power Management tab.
  6. Clear the box next to Allow the computer to turn off this device to save power.
  7. Click OK to apply the setting.
  8. Repeat steps 4-7 for any remaining devices in the Universal Serial Bus Controllers section with “Root Hub” in the name.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.