StarTech.com

Draagbare 4-poorts SuperSpeed USB 3.0 hub - wit

Voeg vier externe USB 3.0 poorten toe aan uw notebook of Ultrabook™ met een slanke, mobiele hub

Productcode: ST4300MINU3W

  • Vier USB type-A poorten die tegelijkertijd kunnen worden gebruikt
  • SuperSpeed USB 3.0-aansluiting met overdrachtsnelheden tot 5 Gbit/s
  • Achterwaarts compatibel met USB 2.0- en USB 1.1/1.0-specificaties en -apparaten
Bekijk meer
  • Compact en draagbaar ontwerp met ingebouwde kabel
  • Plug-and-play en hot-swappable
€ 28,99 EUR exc BTW
€ 35,08 EUR inc BTW

Overzicht

Met de ST4300MINU3W draagbare 4-poorts SuperSpeed mini USB 3.0-hub (wit) kunt u uw USB-connectiviteit uitbreiden door één USB 3.0 poort te veranderen in vier externe USB 3.0 poorten. Dankzij het geïntegreerde kabeldesign is deze mini USB-hub de perfecte accessoire voor uw Mac® / pc notebook of Ultrabook™ computer.

De 4-poorts USB 3.0-hub ondersteunt USB 3.0 databandbreedte (5 Gbps - tot 10x meer dan USB 2.0) en is neerwaarts compatibel met USB 2.0 en 1.1 apparaten, waardoor een probleemloze werking van al uw USB-randapparaten/apparaten, ongeacht hun leeftijd, wordt gegarandeerd.

Deze externe USB 3.0-hub is ideaal voor thuis- of zakelijke gebruikers die draagbaarheid eisen, is voorzien van een USB-voeding en is robuust en compact met een ingebouwde kabel zodat geen extra kabels nodig zijn om de hub op uw systeem aan te sluiten.

Gedekt door een StarTech.com 2-jarige garantie en gratis levenslange technische ondersteuning.

StarTech.com Voordeel

  • Sluit tegelijkertijd vier USB 3.0/2.0/1.x apparaten aan met hun maximumsnelheid
  • Compact ontwerp met ingebouwde kabel voor gemak in het gebruik en draagbaarheid

Toepassingen

Mac of pc Notebook / Ultrabook™-gebruikers met een beperkt aantal USB 3.0 poorten en meerdere USB 3.0 apparaten

Maak moeilijk toegankelijke USB-poorten toegankelijker door de hub te plaatsen tot waar de kabel reikt

Afzonderlijke uit elkaar liggende USB-poorten voor het gebruik van grotere USB-stekkers

Technische specificaties

Garantie
Garantie 2 Years
Hardware
Bus type USB 3.0
Chipsetcode Genesys Logic - GL3522
Interface USB 3.0
Poorten 4
Snellaadpoort(en) Nee
USB-C apparaat poort(en) Nee
USB-C hostverbinding Nee
Prestaties
Maximale overdrachtsnelheid 5 Gbit/s
Type en snelheid USB 3.0 - 5 Gbit/s
Connector(en)
Externe poorten 1 - USB Type-A (9-polig) USB 3.0 Mannelijk
4 - USB Type-A (9-polig) USB 3.0 Vrouwelijk
Software
Besturingssystemen OS Independent; No additional drivers or software required
Speciale opmerkingen / vereisten
Systeem- en kabelvereisten Vrije USB-poort
Indicatoren
LED-indicatoren 1 - Power
Voeding
Inclusief voedingsadapter Gevoed via USB
Gebruiksomgeving
Bedrijfstemperatuur 0°C to 40°C (32°F to 104°F)
Opslagtemperatuur -20°C to 60°C (-4°F to 140°F)
Vochtigheid 0% - 80% rel. luchtvochtigheid
Fysieke eigenschappen
Breedte product 36 mm [1.4 in]
Gewicht product 38 g [1.3 oz]
Hoogte product 14 mm [0.6 in]
Kabellengte 145 mm [5.7 in]
Kleur Wit
Lengte product 80 mm [3.1 in]
Type behuizing Kunststof
Vormfactor Compact
Verpakkingsinformatie
Verzendgewicht (verpakt) 112 g [4 oz]
Wat wordt er meegeleverd
Meegeleverd 1 - USB 3.0 Hub
1 - verkorte handleiding

Compatibiliteit

Bekijk volledige OS compatibiliteit
OS Independent; No additional drivers or software required

Certificaties

Verwante producten

6-poort USB 3.0/2.0 Combo Hub met Oplaadpoort
ST7320USBC
6-poort USB 3.0/2.0 Combo Hub met Oplaadpoort

Voeg 2x USB 3.0 en 4x USB 2.0 poorten toe aan een computer, extern via een enkele USB 3.0-aansluiting

€ 53,99 exc BTW
€ 65,33 inc BTW
Mini 4-poort USB 2.0-hub
ST4200MINI
Mini 4-poort USB 2.0-hub

Biedt 4 externe USB 2.0-poorten in een compacte en draagbare vormfactor

€ 10,99 exc BTW
€ 13,30 inc BTW

Accessoires

Productondersteuning

Veelgestelde vragen (FAQ)

Voor uw aanschaf

It is possible to use some USB hubs without a power supply, however, doing so may prevent certain high-power USB peripherals from operating.

When a power adapter is not used on a hub that comes with a power adapter, power is drawn from the USB port on the computer and then divided between the ports on the hub. This reduces the power delivery to individual ports and high-powered USB peripherals, such as external hard drives, may not start.

On USB hubs that can use a power adapter, more power can be supplied to USB ports than what is possible with a single USB port.

If your USB peripherals require power adapters, they probably do not require power from the USB port and can be used on a USB hub without a power adapter. With USB peripherals that use power adapters, the USB ports on the hub are only used for data transfer and do not draw power from the hub.

USB peripherals that require low power (for example, keyboards and mice) can be used on hubs without a power adapter, in conjunction with other low-power USB peripherals. In this case, power is drawn from the computer's USB port, as described above.

Troubleshooting

When you troubleshoot issues with a USB hub, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • USB A-to-B cable

  • Computer USB port

  • USB peripheral(s)

To test your setup components, try the following:

  • Use the USB cable and USB peripheral(s) in another setup to see if the problem is with the components or the setup.

  • Use a different USB cable, USB port, and USB peripheral in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the hub, make sure that you do the following:

  • If a power adapter is included, provide power to the USB hub.

  • Attach a USB peripheral. The USB hub will not appear in any hardware listings on your system, but USB devices do appear when they are connected.

  • Install the drivers for the USB peripheral.

  • Install the latest drivers for the USB controller and motherboard chipset.

Note: No drivers or software are required for the USB hub to work with your operating system. The USB hub works independently of software and works with any operating system.

When testing your USB peripherals, make sure that you do the following:

  • If required, attach external power.

  • Confirm that the peripheral works on a standard USB port.

If the USB peripheral(s) can be detected on a standard USB port and not on the hub, do the following:

  • Use a new USB A-to-B cable.

  • Test your setup using basic USB peripherals, such as a keyboard or mouse.

  • Test using another USB port.

If the USB device does not work after your computer has been in extended hibernation, it is likely that Windows has automatically turned off the USB Root hub to save power. 

The steps below outline how to configure the USB root hub to stay on during hibernation, to prevent this from happening.
 

Windows 10 / 8

  1. On your keyboard, press the Windows key + X and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows 7 / Vista

  1. Click the Start button and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows XP

  1. On your desktop, right-click the My Computer icon and select Properties.
  2. Click the Device Manager tab.
  3. Expand Universal Serial Bus controllers by clicking the arrow to the left of it.
  4. Right-click the first USB Root Hub device and select Properties.
  5. Click the Power Management tab.
  6. Clear the box next to Allow the computer to turn off this device to save power.
  7. Click OK to apply the setting.
  8. Repeat steps 4-7 for any remaining devices in the Universal Serial Bus Controllers section with “Root Hub” in the name.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.