12in Fan Adapter - TX3 to 2x LP4 Power Y Splitter Cable

Sluit een TX3-ventilator rechtstreeks aan op de computervoeding

Productcode: CPUFANADAPT

€ 1,99 EUR exc BTW
€ 2,41 EUR inc BTW


This 12in 3-pin (TX3) to LP4 Power Y-cable lets you connect your CPU fan directly to the computer power supply, instead of connecting it to the designated motherboard port.

The adapter cable features a TX3 connector for connecting to the CPU fan, as well as a female LP4 connection to the computer power supply and an extra LP4 male connector that compensates for the used of the LP4 connector used to connect to the power supply.

This high quality adapter is backed by's Lifetime Warranty. Voordeel

  • Connect a TX3 fan directly to the power supply, allowing for installation of extra fans in your system
  • Easy to use and install
  • Backed by's lifetime warranty


Allows a fan with a TX3 motherboard connector (2 pins connected) to draw power from a standard LP4 power supply connector

Technische specificaties

Garantie Lifetime
Connector A 1 - LP4 (4-polig, Molex Large Drive Power) Mannelijk
Connector B 1 - LP4 (4-polig, Molex Large Drive Power) Vrouwelijk
1 - Molex-ventilator (3-polig, TX3) Mannelijk
Fysieke eigenschappen
Gewicht product 0 kg [0 lb]
Kabellengte 304.8 mm [12 in]
Lengte product 304.8 mm [12 in]
Verzendgewicht (verpakt) 0 kg [0 lb]
Wat wordt er meegeleverd
Meegeleverd 1 - 6" 3 Pin to Large Internal Power CPU Fan



Veelgestelde vragen (FAQ)


When you troubleshoot issues with an internal power cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Power supply

  • Computer part

  • Power cable

To test your setup components, try the following:

  • Use the power supply, computer part, and power cable in another setup to see if the problem is with the components or the setup.

  • Use a different power supply, computer part, and power cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cable, it is recommended that you do the following:

  • Make sure that the cable is firmly inserted into both ends.

  • The polarity (usually indicated by the color of the cables) matches.

  • No pins are bent or missing on the power supply cable or header, or the computer part.