Product ID: ST124PROEU
The ST124PROEU 4 Port High Resolution VGA Video Splitter - 350 MHz splits a VGA video source signal to 4 monitors or projectors simultaneously - a professional grade solution that is perfect for presentations, classrooms, tradeshows, or in-store displays, where the highest quality video on several monitors is needed.
This High Resolution VGA Splitter supports monitors with up to 350MHz of video bandwidth and display resolutions up to 2048x1536 @80Hz. For added versatility, the VGA splitter features an integrated booster circuit that allows the video signal to be extended up to 210 feet (65 meters), enabling you to situate your displays in the most convenient location based on your application.
This product is TAA compliant and backed by a Startech.com 2-year warranty with free lifetime technical support. Male to Female VGA extension cable required (MXT101HQ)
|Warranty Information||Warranty||2 Years|
|Connector(s)||4 - Connector Type(s)||VGA (15 pin, High Density D-Sub)|
|1 - Connector Type(s)||VGA (15 pin, High Density D-Sub)|
|Environmental||Operating Temperature||5°C to 40°C (41°F to 104°F)|
|Industry Standards||DDC compatible - all other monitors must be able to support the highest video resolution of the DDC-type monitor connected to Video Out 1|
|Packaging Information||Package Length||9.4 in [24.0 cm]|
|Package Width||7.2 in [18.4 cm]|
|Package Height||3.6 in [92.0 mm]|
|Shipping (Package) Weight||24.7 oz [700.0 g]|
|Performance||Maximum Cable Length||213.2 ft [65 m]|
|Maximum Analog Resolutions||2048x1536 @ 80Hz|
|General Specifications||Male to Female VGA extension cable required (MXT101HQ)|
|Product Length||7.2 in [18.2 cm]|
|Product Width||3.3 in [85.0 mm]|
|Product Height||0.8 in [20.0 mm]|
|Weight of Product||14.1 oz [400.0 g]|
|Power||Power Source||AC Adapter Included|
|Input Voltage||100 - 240 AC|
|Input Current||0.3 A|
|Output Voltage||5 DC|
|Output Current||1 A|
|Center Tip Polarity||Positive|
|Power Consumption (In Watts)||5|
|What's in the Box||1 - Included in Package||4 Port High Res. Video Splitter|
|4 - Included in Package||Rubber Feet|
|1 - Included in Package||Power Adapter|
This device outputs a VGA signal. If you have a display or video destination that uses another type of video connection, there are ways that you can convert the video signal or connection. These options are outlined below and organized by the target connection.
|Target connection||First conversion||Second conversion (if required)|
|DVI-D||VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI.||HDMI to DVI-D: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI.|
|DVI-I||VGA to DVI-I: https://www.startech.com/Cables/Audio-Video/Video-Adapter/DVIVGA/.||N/A|
|DisplayPort||VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI.||HDMI to DisplayPort: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=DisplayPort.|
Note: You might need to use more than one converter as part of your solution; however, you should try to use the least number of converters and cables to connect your source and destination. If you have the option to convert to multiple target video connections, choose the option that requires the fewest number of conversions.
When you convert from VGA to DVI, you need to know if you are converting to a DVI-I or a DVI-D connection. For more information about how to identify the type of connection that you need, refer to the following FAQ: https://www.startech.com/faq/video_signal_converters_dvi_interface.
You also need to know which form of DVI that you are using, because DVI-I supports both analog (VGA) and digital (HDMI) signals, while DVI-D only supports digital (HDMI) signals.
Note: Certain devices may have a DVI-I connection but only support DVI-D signaling. It is important to verify that your DVI-I device supports DVI-I signaling.
This device has a VGA input port. If you have a video source that uses another video connection, there are options available to convert the video signal or connection. These options will be outlined below for each video source connection.
DVI-I to VGA: https://www.startech.com/DVIVGAMFBK.
DisplayPort to VGA: https://www.startech.com/AV/Displayport-Converters/DP-VGA/.
When you convert from DVI to VGA, you need to know if you are converting from a DVI-I or a DVI-D connection. For more information about how to identify the type of connection that you have, refer to the following FAQ: https://www.startech.com/faq/video_signal_converters_dvi_interface.
You also need to know which form of DVI that you are using, because DVI-I supports both analog (VGA) and digital (HDMI) signals, while DVI-D only supports digital (HDMI) signals. Some DVI-I connections only support DVI-D signaling. In this case, you must use a DVI-D to VGA converter.