Product ID: SV565UTPUL
The SV565UTPUL Long Range USB VGA KVM Console Extender over Cat5 UTP (1000 ft) lets you control a server, computer or multiple computers (connected through KVM Switch) over a standard Cat5 or Cat6 UTP network cable connection, at distances of up to 1000ft (300m) away.
You can use your existing USB keyboard, USB mouse, and monitor to access both the server room and your office computer, saving space and avoiding the need for a dedicated remote console by allowing you to switch between workstation view and KVM view at the remote location.
This product is TAA compliant and backed by a Startech.com 3-year warranty with free lifetime technical support.
Warranty Information | Warranty | 3 Years |
---|---|---|
Connector(s) | 4 - Console Interface(s) | USB Type-A (4 pin) USB 2.0 |
2 - Console Interface(s) | VGA (15 pin, High Density D-Sub) | |
2 - Host Connectors | VGA (15 pin, High Density D-Sub) | |
2 - Other Interface(s) | RJ-45 | |
Environmental | Operating Temperature | 0°C to 40°C (32°F to 104°F) |
Storage Temperature | -20°C to 60°C (-4°F to 140°F) | |
Humidity | 0~80% RH | |
Hardware | Audio | No |
KVM Ports | 2 | |
PC Interface | USB | |
PC Video Type | VGA | |
Number of Monitors Supported | 1 | |
Rack-Mountable | No | |
Cables Included | Yes | |
Indicators | 2 - LED Indicators | Local indicator |
Remote indicator | ||
Packaging Information | Package Height | 72 mm [2,8 in] |
Package Length | 29,4 cm [11,6 in] | |
Shipping (Package) Weight | 1,4 kg [3,0 lb] | |
Package Width | 19,7 cm [7,8 in] | |
Performance | IP Control | No |
Max Transfer Distance | 300 m (984 ft) | |
Maximum Analog Resolutions | UXGA - 1600x1200, WUXGA - 1920x1200 | |
Wide Screen Supported | Yes | |
Port Selection Support | Push Button and Hotkeys | |
MTBF | 164000 hours | |
Physical Characteristics | Weight of Product | 622 g [22,0 oz] |
Color | Black | |
Material | Steel | |
Product Width | 15,7 cm [6,2 in] | |
Product Height | 20 mm [0,8 in] | |
Product Depth | 70 mm [2,8 in] | |
Power | Power Source | AC Adapter Included |
Input Voltage | 100 - 240 AC | |
Input Current | 0.8A | |
Output Voltage | 12V DC | |
Output Current | 1.5A | |
Center Tip Polarity | Positive | |
Plug Type | M | |
Power Consumption (In Watts) | 18 | |
Software | OS Compatibility | OS independent; No software or drivers required |
Special Notes / Requirements | Note | Supports most combo keyboard and mouse sets (including Wireless) |
What's in the Box | 2 - Included in Package | KVM Extenders (1x Local, 1x Remote) |
2n1 USB VGA KVM Cables | ||
1 - Included in Package | Rubber Feet | |
Universal power adapter: comes ready for NA/EU/UK only when you buy in NA/EU/UK; comes ready for Australia and New Zealand only when you buy in Australia and New Zealand | ||
User Manual |
Connect VGA video and USB using a single thin KVM cable
Connect VGA video and USB using a single thin KVM cable
Connect VGA video and USB using a single thin KVM cable
Replace your 12V DC (1.5 Amp) power cable, with a reliable connection
Connect your VGA monitor with the highest quality connection available
Connect your VGA monitor with the highest quality connection available
We are always ready to assist you with any questions you may have.
Live Chat (opens in new window)We are always ready to assist you with any questions you may have.
Live Chat (opens in new window)There are some quick tests that you can complete to rule out potential issues. You can test to make sure that the following components are working correctly and are not the source of the issue:
Note: When you test setup components, you should avoid using video adapters. For example, if you are converting a VGA source to HDMI for use with an HDMI extender, you should use an HDMI source when you test the components.
To test your setup components, try the following:
When you test your cables, it is recommended that you do the following:
When you test the video source and video destination, it is recommended that you do the following:
Note: In order for your setup to work properly, the video source, extender, and destination all need to support the resolution that you are using.
This device outputs a VGA signal. If you have a display or video destination that uses another type of video connection, there are ways that you can convert the video signal or connection. These options are outlined below and organized by the target connection.
Target connection | First conversion | Second conversion (if required) |
DVI-D | VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI. | HDMI to DVI-D: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI. |
DVI-I | VGA to DVI-I: https://www.startech.com/Cables/Audio-Video/Video-Adapter/DVIVGA/. | N/A |
HDMI |
VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI. |
N/A |
DisplayPort | VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI. | HDMI to DisplayPort: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=DisplayPort. |
Note: You might need to use more than one converter as part of your solution; however, you should try to use the least number of converters and cables to connect your source and destination. If you have the option to convert to multiple target video connections, choose the option that requires the fewest number of conversions.
When you convert from VGA to DVI, you need to know if you are converting to a DVI-I or a DVI-D connection. For more information about how to identify the type of connection that you need, refer to the following FAQ: https://www.startech.com/faq/video_signal_converters_dvi_interface.
You also need to know which form of DVI that you are using, because DVI-I supports both analog (VGA) and digital (HDMI) signals, while DVI-D only supports digital (HDMI) signals.
Note: Certain devices may have a DVI-I connection but only support DVI-D signaling. It is important to verify that your DVI-I device supports DVI-I signaling.
This device has a VGA input port. If you have a video source that uses another video connection, there are options available to convert the video signal or connection. These options will be outlined below for each video source connection.
Source connection |
Conversion |
DVI-I |
DVI-I to VGA: https://www.startech.com/DVIVGAMFBK. |
DVI-D |
DVI-D to VGA: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=DVI-D&filter_AVOUTPUT=VGA. |
HDMI |
HDMI to VGA: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=VGA. |
DisplayPort |
DisplayPort to VGA: https://www.startech.com/AV/Displayport-Converters/DP-VGA/. |
When you convert from DVI to VGA, you need to know if you are converting from a DVI-I or a DVI-D connection. For more information about how to identify the type of connection that you have, refer to the following FAQ: https://www.startech.com/faq/video_signal_converters_dvi_interface.
You also need to know which form of DVI that you are using, because DVI-I supports both analog (VGA) and digital (HDMI) signals, while DVI-D only supports digital (HDMI) signals. Some DVI-I connections only support DVI-D signaling. In this case, you must use a DVI-D to VGA converter.
Check out our review guidelines.