HDMI Over IP Extender - 1080p
Broadcast your computer screen to a remote display over your network, with remote USB console control
Product ID: IPUSB2HD3
- Collaborate with co-workers by using your network to easily switch between devices shown on a shared display
- Share video with a wireless or wired LAN connection using any Windows computer on your network
- Control the video-over-IP adapter, using the included software
This HDMI over IP extender lets you share an HDMI display or projector with the wireless or wired computer on your network. With intuitive controls and effortless screen sharing, this extender makes it easier than ever for users to collaborate and deliver presentations in boardrooms and office meetings.
The IP video extender supports resolutions up to 1080p and features two built-in USB ports, enabling you to connect remote USB devices to your computer from your display. It’s the perfect solution for controlling a computer from wherever the adapter is located.
Streamline your digital collaboration
The IP video extender helps you boost your office productivity, by making it easier for users to collaborate and communicate. The included software lets you connect multiple computers and easily switch between which user is sharing their content with the HDMI display, unlike some wireless video systems that are difficult to configure and require users to disconnect and reconnect manually. You can even use the video-over-IP extender to share information with a remote audience, such as connecting to a remote display over an office LAN, to hold remote meetings while you're in another part of the office.
Bring your own device
With this IP video extender, you can turn your HDMI television, monitor or projector into an IP display that can connect to any Windows® computer on your network, making it perfect for conference rooms and classrooms where different ideas are shared by users who bring their own computers.
Extend two USB devices at your display
With a built-in USB hub, you can use your computer to access two remote USB devices at your remote display, enabling you or your customers to control the computer from the remote location. Remote operation can be used to create interactive digital signage, to engage your customers. Or, if you're using the video-over-IP extender as part of your IT infrastructure, you can use the USB extender to add a remote KVM console that you can use to control your server from a remote location.
The IPUSB2HD3 is TAA compliant backed by a 2-year StarTech.com warranty with free lifetime technical support.
Enable your employees or co-workers to share each other’s screens on a boardroom display
Create a remote KVM console that you can use to control your server from a remote location
Share information with clients at doctors offices and hospitals, while keeping the computer in a remote, secure location
|Cabling||Cat 5e UTP or better|
|Chipset ID||DisplayLink - DL-195|
|Audio Specifications||Two channel stereo audio supported|
|General Specifications||This USB video adapter uses a DisplayLink family chipset. If you’re connecting this device to a computer along with additional USB video adapters or docking stations, please avoid using devices with a Trigger or Fresco family chipset.|
|Max Distance||100 m / 330 ft|
|Maximum Data Transfer Rate||USB - 480Mbps
Ethernet - 1000Mbps
|Maximum Digital Resolutions||1920x1080|
|Supported Resolutions||Widescreen (16/32 bit):
1920x1200, 1920x1080, 1680x1050, 1600x900, 1440x900, 1360x768, 1280x800, 1280x768, 1280x720
1600x1200, 1400x1050, 1280x1024, 1280x960, 1152x864, 1024x768, 800x600
|Wide Screen Supported||Yes|
|Connector A||1 - HDMI (19 pin) Female Output|
|2 - USB Type-A (4 pin) USB 2.0 Female|
|Connector B||1 - USB B (4 pin) Female|
|1 - RJ-45 Female|
|OS Compatibility||Windows® 10, 8.1, 8, 7, Vista, XP|
|Center Tip Polarity||Positive|
|Input Current||0.6 A|
|Input Voltage||100 ~ 240 AC|
|Output Current||2 A|
|Output Voltage||5 DC|
|Power Consumption (In Watts)||10|
|Power Source||AC Adapter Included|
|Product Height||24 mm [0.9 in]|
|Product Length||102 mm [4 in]|
|Product Weight||304 g [10.7 oz]|
|Product Width||74 mm [2.9 in]|
|Shipping (Package) Weight||710 g [25.1 oz]|
|What's in the Box|
|Included in Package||1 - HDMI over IP extender|
|1 - USB cable|
|1 - CAT5 cable|
|1 - universal power adapter (NA, EU, UK, ANZ)|
|1 - mounting bracket|
|1 - mounting screw kit|
|1 - rubber foot set|
|1 - quick start guide|
Connect USB 2.0 peripherals to your computer
4427+ In stock
Connect USB 2.0 peripherals to your computer
Connect USB 2.0 peripherals to your computer
331+ In stock
Make Fast Ethernet network connections using this high quality Cat5e Cable, with Power-over-Ethernet capability
94+ In stock
Frequently Asked Questions
Before You Buy
To get the highest quality signal from your source to your display when you use an HDMI extender, do the following:
Make sure that the HDMI versions of the source, extender, and destination are compatible. For example, if you require 3D support, make sure that all of the devices can support 3D over HDMI.
Use the least amount of adapters, splitters, or converters as possible. Each device that you use in your setup creates additional points of potential failure and creates more steps for an HDCP key to hop through, which may cause issues with older displays. For more information on HDCP, refer to the following FAQ: http://www.startech.com/faq/video_signal_converters_HDCP.
Use an HDMI extender that exceeds the requirements of the setup. For example, if you need to extend the signal 200 feet, it is best to use an extender capable of more than 200 feet.
Make sure that all of the CAT 5/6 runs are as straight as possible, with the least amount of coiling.
Make sure that all of the patches, wall jacks, and cables use the highest possible CAT specification, (for example, CAT 6), and were tested to conform to the standard.
Use patches, wall jacks, and cables with the same pin configuration. For more information on T568A versus T568B wiring, refer to the following FAQ: http://www.startech.com/faq/network_cables_a_vs_b_pinout.
Keep the cabling away from sources of high noise.
Make sure that you use adequate electrical grounding in your setup.
When you troubleshoot issues with a video extender, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Video and Ethernet cables
Video source (such as a DVD player or computer)
Video destination (such as a monitor or projector)
Note: When you are testing setup components, you should avoid using video adapters. For example, if you are converting a VGA source to HDMI for use with an HDMI extender, you should use an HDMI source when you test the components.
To test your setup components, try the following:
Use the cable, video extender, video source, and video destination in another setup to see if the problem is with the components or the setup.
Use a different cable, video extender, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cables, it is recommended that you do the following:
Test each cable individually.
Use short cables when you are testing.
When you test the video source and video destination, it is recommended that you do the following:
Remove the video extender from your setup and test to make sure that the video source and video destination work together without the video extender.
Test to make sure that the video source and video destination work together at the resolution that you want to use.
Note: In order for your setup to work properly, the video source, extender, and destination all need to support the resolution that you are using.
If the IP extender detects that it does not have the necessary bandwidth to function, it may disconnect from the network. It is recommended that you use the IP extender with a switch or router with no other networking devices connected to it.
If the IP extender outputs video at 1920x1080, it can use up to 136Mbps. If the IP extender outputs video at 1920x1080 and remote USB devices are connected it, the IP extender can use up to 275Mbps.
Make sure that your network can support the bandwidth required by the IP extender.
Compliance and Safety
- If product has an exposed circuit board, do not touch the product under power.
- If Class 1 Laser Product. Laser radiation is present when the system is open.
- Wiring terminations should not be made with the product and/or electric lines under power.
- Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
- Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Product appearance and specifications are subject to change without notice.