1-Port Gigabit Midspan - PoE+ Injector - 802.3at and 802.3af
Deliver power and data to your Power over Ethernet device using this mountable PoE+ midspan
Product ID: POEINJ1GW
- Easily connect, power, and operate a Gigabit PoE-powered device (PD)
- Supplies up to 30-watts power output
- Flexible setup, with a desktop-sized, or surface-mountable housing
- Save money by using your existing Cat5 or better Ethernet cable
- Fast, plug-and-play setup and operation, with no configuration required
- Provides one PoE+ (PSE, power and data) 10/100/1000Mbps compliant RJ45 port - 802.3at and 802.3af
- Integrates shielded RJ45 connectors
- Automatically detects the powered device to provide the appropriate level of power output
Volume Order?
Request a quote
Reseller Pricing:
Create an Account
Overview
This Gigabit Power over Ethernet (PoE+) injector supplies power and data connectivity to a Gigabit PoE-compliant device using standard Ethernet cable, at distances of up to 100 m (330 ft.).
The PoE midspan is a cost-effective alternative to upgrading your existing network switch to a PoE-capable model.
Convenience and cost savings
This versatile PoE injector lets you connect a PoE-powered device (PD) to a non-PoE network switch, so you can avoid the expense and aggravation of replacing your existing switch with a PoE-enabled model. It supplies up to 30 watts of power, so you can easily power and access a high-power PoE-compliant device, such as an IP camera or a wireless access point (WAP), using traditional copper (RJ45) Ethernet cable. The midspan injector makes it easy to extend data and power connectivity to your PoE+ device across long distances, even in a remote location where a typical power outlet isn’t available.
Easy to set up in mixed environments
You can integrate this compact injector discreetly into a variety of environments. It features a surface-mountable housing that’s perfect for installing on walls or under a desk, but it’s also palm-sized, for use on desktop surfaces.
Plus, with plug-and-play operation, you can enjoy fast and hassle-free setup without disrupting your workflow.
Intelligent power allocation
Not sure which class your PoE device is? The Gigabit PoE+ injector automatically detects the power requirements of your connected PoE PD, and delivers the appropriate level of power without damaging your device.
The POEINJ1GW is backed by a StarTech.com 2-year warranty and free lifetime technical support.
Applications
Ideal for high-power PoE+ devices requiring Gigabit speeds such as PTZ (Pan, Tilt, Zoom) cameras and Wi-Fi® access points (WAP)
Enable remote installation of touchscreens, information kiosks, and phones in locations where a power connection isn’t available
Perfect for small and home offices, as well as SMB applications, including system integrations, and IT administration
Technical Specifications
| Product Numbers | ||
|---|---|---|
| Exertis IE | STCPOEINJ1GW | |
| Ingram IE | V933766 | |
| UPC Code | 065030865500 | |
| Warranty Information | ||
|---|---|---|
| Warranty | 2 Years | |
| Hardware | ||
| Industry Standards | IEEE 802.3af PoE, IEEE 802.3at PoE+ | |
| IEEE 802.3 (10BASE-T), IEEE 802.3u (100BASE-TX), IEEE 802.3ab (1000BASE-T) | ||
| Ports | 1 | |
| Performance | ||
| Maximum Cable Length | 100 m [328 ft] | |
| Maximum Data Transfer Rate | 2 Gbps (Full-Duplex) | |
| Power Output | 48 V DC, 30 W | |
| Connector(s) | ||
| Connector Type(s) | 2 - RJ-45 Female | |
| Special Notes / Requirements | ||
| Patents and Licenses | The following patents are licensed for this product. This list might not be all inclusive. • United States Patent No. 5,406,260 (expired) • United States Patent No. 6,650,622 • United States Patent No. 7,457,250 • United States Patent No. 8,155,012 • United States Patent No. 8,902,760 • United States Patent No. 8,942,107 • United States Patent No. 9,019,838 • United States Patent No. 9,049,019 • United States Patent Application No. 14/695,456 • United States Patent Application No. 14/726,940 |
|
| System and Cable Requirements | If your connected devices do not meet the IEEE 802.3af or IEEE 802.3at PoE standard, then the POEINJ1GW will not inject power to the connected device(s) / Ethernet cable(s) | |
| Indicators | ||
| LED Indicators | 1 - Power | |
| Power | ||
| Center Tip Polarity | Positive | |
| Input Current | 0.75 A | |
| Input Voltage | 100 ~ 240 AC | |
| Output Current | 0. 64 A | |
| Output Voltage | 56 DC | |
| Plug Type | M | |
| Power Consumption (In Watts) | 36 | |
| Power Source | AC Adapter Included | |
| Environmental | ||
| Humidity | 10~90% RH (Non-Condensing) | |
| Operating Temperature | 0°C to 45°C (32°F to 113°F) | |
| Storage Temperature | -20°C to 85°C (-4°F to 185°F) | |
| Physical Characteristics | ||
| Color | Black | |
| Enclosure Type | Plastic | |
| Product Height | 25 mm [1 in] | |
| Product Length | 70 mm [2.8 in] | |
| Product Weight | 50 g [1.8 oz] | |
| Product Width | 63 mm [2.5 in] | |
| Packaging Information | ||
| Shipping (Package) Weight | 1 kg [2.3 lb] | |
| What's in the Box | ||
| Included in Package | 1 - Gigabit midspan | |
| 4 - screws | ||
| 1 - universal power adapter | ||
| 3 - power cords (EU, UK, ANZ) | ||
| 1 - quick-start guide | ||
Certifications
Related Products
Industrial 2 Port Gigabit PoE+ Power over Ethernet Injector 48V / 30W - Wall-Mountable
Supply power and data connectivity to two Gigabit PoE devices over standard Ethernet cabling
4-Port Gigabit Midspan - PoE+ Injector - 802.3at/af
Deliver power and data to four Power over Ethernet devices using this wall-mountable PoE+ midspan hub
123+ In stock
Accessories
Cat6 Patch Cable with Molded RJ45 Connectors - 25 ft. - Blue
Make Power-over-Ethernet-capable Gigabit network connections
223+ In stock
Bulk Cat6 Ethernet Cable - 1000 ft. - Stranded - CM-Rated for In-Wall Use - Blue
Make Gigabit network connections using this high quality Cat6 Cable
48+ In stock
1 Port RS232 Serial Ethernet Device Server - PoE Power Over Ethernet
Connect to, configure and remotely manage an RS-232 serial device over an IP network
Follow us on Twitter | Find us on Google+