Niet meer leverbaar

DisplayPort naar DVI Dual-Link Actieve Converter – USB gevoed

Sluit uw DVI dual-link beeldscherm aan op een computer met DisplayPort voor toepassingen met hoge resolutie

Productcode: DP2DVID

  • Ondersteunt resoluties tot 2560x1600 met DVI dual-link beeldschermen
  • Ondersteunt 1920x1080 met single-link beeldschermen
  • Gevoed via een enkele USB 2.0-poort

Met de DP2DVID DisplayPort naar DVI-D Dual-Link adapter kunt u uw DisplayPort videobron (pc, notebook, MacBook, etc.) aansluiten op een DVI-D-beeldscherm waaronder televisies en Apple Cinema HD Display, zodat u zich de kosten kunt besparen voor het moeten upgraden naar een beeldscherm met DisplayPort.

Het apparaat zet het signaal actief om, gevoed door een enkele USB-poort, en kan de maximale dual-link resoluties tot 2560x1600 weergeven. Gebruik de adapter om uw scherm te dupliceren op een andere monitor of om de werkruimte op uw bureaublad uit te breiden.

Met 2-jaar garantie en gratis levenslange technische ondersteuning door StarTech.com

Bent u op zoek naar een single-link DVI-adapter? Onze DP2DVI ondersteunt een maximale resolutie van 1920x1200.

Toepassingen

  • Ideaal voor digitale amusementscentra, kantoren aan huis, vergaderzalen en beurzen
  • Perfect voor schermen van groot formaat die gebruik maken van hoge resoluties via DVI dual-link
  • Blijf uw bestaande DVI-monitor gebruiken met uw nieuw DisplayPort-apparaat
  • Ideaal om uw DVI-monitor te gebruiken als tweede beeldscherm

Het voordeel van StarTech.com

  • Gebruiksvriendelijke, compacte converter zorgt ervoor dat DisplayPort achterwaarts compatibel wordt met uw DVI-D dual-link beeldscherm
  • Actieve DisplayPort-converter voor DisplayPort-videokaarten die geen DVI-signalen kunnen afgeven

Partnernummers

  • UPC 065030837736

Specificaties

Warranty Information Warranty 2 Years
Connector(en) 1 - Connector A DisplayPort (20-polig)
USB Type-A (4-polig) USB 2.0
1 - Connector B DVI-D (19-polig)
Fysieke eigenschappen Kleur Zwart
Type behuizing Kunststof
Kabellengte 0 mm [0,0 in]
Lengte product 10,5 cm [4,1 in]
Breedte product 0 mm [0,0 in]
Hoogte product 0 mm [0,0 in]
Gewicht product 50 g [1,8 oz]
Gebruiksomgeving Bedrijfstemperatuur 0°C to 70°C (32°F to 158°F)
Vochtigheid 0% - 90% rel. luchtvochtigheid
Hardware AV-ingang DisplayPort - 1.2
Adapterstijl Adapters
AV-uitgang DVI-D - Dual-Link
Audio Nee
Prestaties Audiospecificaties DVI - No Audio Support
Maximale digitale resoluties 2560x1600
Ondersteuning breedbeeld: Ja
Verpakkingsinformatie Package Length 0 mm [0,0 in]
Package Width 0 mm [0,0 in]
Package Height 15,6 cm [6,1 in]
Verzendgewicht (verpakt) 300 g [10,6 oz]
Wat wordt er meegeleverd 1 - Meegeleverd DisplayPort-naar-DVI-adapter

Accessoires

GCMDP2DPMF

Mini DisplayPort naar DisplayPort Adapter Converter - M/F

Sluit uw apparaten met Mini DisplayPort aan met behulp van een standaard DisplayPort-kabel

Uw prijs
€23,99 EUR excl. VAT
€29,03 EUR incl. VAT
DVIDDMM10

DVI-D Dual Link kabel- M/M - 3 m

Biedt een high-speed, kristalheldere verbinding met uw digitale DVI-apparaten

Uw prijs
€15,99 EUR excl. VAT
€19,35 EUR incl. VAT
DVIDDMM6

1,8 m DVI-D Dual Link-kabel - M/M

Biedt een high-speed, kristalheldere verbinding met uw DVI digitale apparaten

Uw prijs
€10,99 EUR excl. VAT
€13,30 EUR incl. VAT
USBEXTAA_6

1,8m USB 2.0 Verlengkabel A naar A -M/F

Verleng de afstand tussen uw USB 2.0-apparaten met 1,8m

Uw prijs
€3,99 EUR excl. VAT
€4,83 EUR incl. VAT

Drivers/Downloads

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Handleiding:

Datasheet

Productondersteuning

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Veelgestelde vragen (FAQ)

Installatie

This device is plug and play. It does not use any drivers, and does not require any setup tasks other than plugging in the source (for example, a computer) and the destination (for example, a monitor).

Troubleshooting

When you troubleshoot issues with a video adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • Video adapter

  • Video source (such as a DVD player or computer)

  • Video destination (such as a monitor or projector)

To test your setup components, try the following:

  • Use the cable, video adapter, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different cable, video adapter, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the video adapter from your setup and test to make sure that the video source and video destination work together without the video adapter.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, adapter, and destination all need to support the resolution that you are using.

Try the following:

  1. Check that the monitor’s video port works with another source.
  2. Check that the cables between the source and the destination work with other equipment.
  3. Check whether the video adapter works with another source and another destination.

The error “Out of Range” normally means that the resolution being output by the computer is not compatible with the display. Try lowering the resolution to see if that helps resolve the issue.  You may need to connect another monitor or restart the computer or source to accomplish this.

Voor uw aanschaf

Unfortunately no, this device has an intended source and an intended destination.  Refer to the title of the webpage for this order.

When you convert video from a source that uses DisplayPort or Mini DisplayPort to DVI or HDMI (for example, a computer to a monitor), you will need to consider the difference between passive and active adapters.

If the source supports dual-mode DisplayPort (also known as DP++), then you can use a passive adapter because the source can perform the conversion. If the source does not support DP++, then you need to use an active converter, which includes additional chips to perform the conversion.

Thunderbolt ports support DP++ natively. To run multiple monitors from the same computer, refer to the Active Adapters section below.

Passive Adapters

Passive adapters are less expensive since they do not need to include additional chips. A quick way to check whether you can use a passive adapter is to see if the DisplayPort or Mini DisplayPort source has the DP++ symbol above it. The symbol is a D with a P inside of it, with two + signs to the left, one on top of the other.

Active Adapters

Active adapters use additional chips to make the conversion inside the adapter, regardless of whether the source supports DP++. This means that active adapters are more expensive than passive adapters.

If you want to use multiple monitors with the same computer, you should use an active adapter because some video cards cannot run the maximum number of monitors while using DP++. This is especially true if the computer has more than one DisplayPort or Mini DisplayPort connection. Check with your video card manufacturer to confirm which type of adapter you need for the setup that you would like to run.

Note: You should use passive adapters with StarTech.com MST hubs, except when you are converting from DisplayPort to VGA, since that type of conversion requires active adapters.  For more information on using adapters with StarTech.com MST hubs, refer to the following FAQ: http://www.startech.com/faq/mst_hubs_passive_vs_active_adapters.

Surface Dock

If you experience issues when you connect passive video signal adapters to the Surface Dock, Microsoft recommends that you use active video signal converters instead. StarTech.com offers an active video signal converter for DVI monitors (MDP2DVIS) and for HDMI monitors (MDP2HD4KS).

Note: This issue does not apply to the Surface Pro 3 Docking Station.

Compliance and safety

Compliance letters

  • WEEE
    • Taal: English
  • RoHS
    • Taal: English

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Uitvoering en specificaties van het product zijn zonder aankondiging vatbaar voor wijzigingen.
Terug naar boven