3 m DisplayPort naar DVI Video Adapter Converter Kabel - M/M

Sluit uw DVI-monitor aan op een computer met DisplayPort via een enkele kabel

Productcode: DP2DVIMM10

  • Ondersteuning voor PC-resoluties tot 1920x1200 en HDTV-resoluties tot 1080p
  • Gemakkelijk in het gebruik, geen software nodig
Uw prijs
€47,99 EUR excl. VAT
€58,07 EUR incl. VAT

Met de DP2DVIMM10 DisplayPort naar DVI (M-M) Video Converter Kabel kunt u een DVI-beeldscherm aansluiten op een DisplayPort-videokaart/-bron met behulp van een enkele kabel. De kabel legt een verbinding over een afstand van 3 m en is voorzien van een DVI-aansluiting (mannetje) en een DisplayPort-aansluiting (mannetje).

De DisplayPort/DVI video converter kabel ondersteunt videosignalen met hoge bandbreedte en ondersteunt monitorresoluties tot 1920x1200 of HDTV-resoluties tot 1080p – zo kunt u optimaal gebruik maken van uw DVI-scherm, aangesloten op een moderne DisplayPort-videobron.

DP2DVIMM10 is een passieve adapterkabel die een DP++ poort nodig heeft (DisplayPort++), wat betekent dat er via de poort ook DVI en HDMI-signalen kunnen worden doorgegeven.

Met 3-jarige garantie en gratis levenslange technische ondersteuning door StarTech.com

Toepassingen

  • Blijf uw bestaande DVI-beeldscherm gebruiken met onze DisplayPort-naar-DVI video-converter kabels
  • De DisplayPort naar DVI kabel zorgt voor een gemakkelijke en probleemloze aansluiting op een DVI-D (digitaal) beeldscherm

Het voordeel van StarTech.com

  • Plug-and-play converter zorgt ervoor dat uw DisplayPort-bron achterwaarts compatibel wordt met uw DVI-D-beeldscherm
  • Gemakkelijk in het gebruik, geen software of drivers nodig
  • Ontworpen als enkele kabel en directe bron-naar-beeldscherm oplossing

Partnernummers

  • Ingram Micro Belgium 1600087
  • Tech Data - Belgium 4428370
  • UPC 065030832182

Specificaties

Warranty Information Warranty 3 Years
Connector(en) 1 - Connector A DisplayPort (20-polig)
1 - Connector B DVI-D (25-polig)
Fysieke eigenschappen Hoogte product 0 mm [0,0 in]
Gewicht product 246 g [8,7 oz]
Breedte product 0 mm [0,0 in]
Kleur Zwart
Kabellengte 3,0 m [10,0 ft]
Lengte product 3,0 m [10,0 ft]
Hardware Active or Passive Adapter Passief
AV-ingang DisplayPort - 1.2
Adapterstijl Kabeladapters
AV-uitgang DVI-D - Single-Link
Audio Nee
Connectormateriaal Nikkel
Type kabelmantel PVC - Polyvinyl Chloride
Prestaties Audiospecificaties DVI - No Audio Support
Maximale kabellengte 3,0 m [10,0 ft]
Maximale digitale resoluties 1920x1200 / 1080p
Speciale opmerkingen / vereisten Notitie DP++ (DisplayPort++) poort op videokaart of videobron vereist.
Verpakkingsinformatie Package Height 14 mm [0,6 in]
Package Length 33 cm [13,0 in]
Verzendgewicht (verpakt) 269 g [9,5 oz]
Package Width 25,5 cm [10,0 in]
Wat wordt er meegeleverd 1 - Meegeleverd 3 m DisplayPort naar DVI Video Adapter Converter Kabel - M/M

Accessoires

DVIDSMF6

DVI-D Single Link monitor verlengkabel - M/F - 1,8 m

Verleng uw DVI-D-verbinding (Singel Link) met 15 ft (1,8 m)

Uw prijs
€13,99 EUR excl. VAT
€16,93 EUR incl. VAT
DVIDSMF10

10 ft DVI-D Single Link Monitor Extension Cable - M/F

Extend your DVI-D (single link) connection by 10ft

Uw prijs
€17,99 EUR excl. VAT
€21,77 EUR incl. VAT
DVIDSMF15

DVI-D Single Link monitor verlengkabel - M/F - 4,6 m

Verleng uw DVI-D-verbinding (Singel Link) met 15 ft (4,6 m)

Uw prijs
€20,99 EUR excl. VAT
€25,40 EUR incl. VAT
DVIDEXTAA6IN

15cm DVI-D Dual-Link Digitale Poortbeschermer Verlengkabel M/F

Verleng een DVI-D-poort met 15cm om onnodige belasting op de poort te voorkomen

Uw prijs
€11,99 EUR excl. VAT
€14,51 EUR incl. VAT
DVIDDMF15

15 ft DVI-D Dual Link Monitor Extension Cable - M/F

Extend the connection distance between your DVI-D digital devices by 15ft

Uw prijs
€17,99 EUR excl. VAT
€21,77 EUR incl. VAT
DVISPL1DH

1 ft DVI-D to DVI-D & HDMI Splitter Cable - M/F

Geef tegelijkertijd een DVI-D-signaal weer op een DVI- en een HDMI®-monitor

Uw prijs
€20,99 EUR excl. VAT
€25,40 EUR incl. VAT
HDDVIMF8IN

20cm HDMI naar DVI-D Video adapter kabel - M/F

Sluit een DVI-apparaat aan op met HDMI® uitgevoerd apparaat via een standaard DVI-D-kabel

Uw prijs
€10,99 EUR excl. VAT
€13,30 EUR incl. VAT
HDMIDVIMF

HDMI naar DVI-D adapter - M/F

Sluit apparaten met DVI aan op apparaten met HDMI® ingeschakeld en omgekeerd

Uw prijs
€10,99 EUR excl. VAT
€13,30 EUR incl. VAT

Drivers/Downloads

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Datasheet

Productondersteuning

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Veelgestelde vragen (FAQ)

Installatie

This device is plug and play. It does not use any drivers, and does not require any setup tasks other than plugging in the source (for example, a computer) and the destination (for example, a monitor).

Troubleshooting

When you troubleshoot issues with a video adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • Video adapter

  • Video source (such as a DVD player or computer)

  • Video destination (such as a monitor or projector)

To test your setup components, try the following:

  • Use the cable, video adapter, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different cable, video adapter, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the video adapter from your setup and test to make sure that the video source and video destination work together without the video adapter.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, adapter, and destination all need to support the resolution that you are using.

Try the following:

  1. Check that the monitor’s video port works with another source.
  2. Check that the cables between the source and the destination work with other equipment.
  3. Check whether the video adapter works with another source and another destination.

The error “Out of Range” normally means that the resolution being output by the computer is not compatible with the display. Try lowering the resolution to see if that helps resolve the issue.  You may need to connect another monitor or restart the computer or source to accomplish this.

Voor uw aanschaf

Unfortunately no, this device has an intended source and an intended destination.  Refer to the title of the webpage for this order.

Digital Visual Interface (DVI) is a video display interface that can contain different types of signaling, based on the application. DVI cables and ports are created using different connector types to identify what application they are intended to be used in. The connector types are identified by the number of pins on the DVI connector. DVI comes in the following five different connector types: 

Single and Dual link DVI indicate the maximum resolution capabilities of the video source or video destination. The maximum resolutions are Single Link (1920 x 1080 @ 60Hz) and Dual Link (2560 x 1600 @ 60Hz).

Note: The maximum resolution of your video source and video destination are ultimately determined by the technical specifications of the devices. The connector type is not a definitive indicator of the maximum resolution.

DVI-A carries only analog (for example, VGA) with no digital component. DVI-D carries only digital video (for example, HDMI) with no analog component. DVI-I combines DVI-A and DVI-D connections to include both analog and digital components. A DVI-I port may be on either your video source or display, but whether or not a display carries either or both analog and digital sources depends on the technical specifications of your device.

When you convert video from a source that uses DisplayPort or Mini DisplayPort to DVI or HDMI (for example, a computer to a monitor), you will need to consider the difference between passive and active adapters.

If the source supports dual-mode DisplayPort (also known as DP++), then you can use a passive adapter because the source can perform the conversion. If the source does not support DP++, then you need to use an active converter, which includes additional chips to perform the conversion.

Thunderbolt ports support DP++ natively. To run multiple monitors from the same computer, refer to the Active Adapters section below.

Passive Adapters

Passive adapters are less expensive since they do not need to include additional chips. A quick way to check whether you can use a passive adapter is to see if the DisplayPort or Mini DisplayPort source has the DP++ symbol above it. The symbol is a D with a P inside of it, with two + signs to the left, one on top of the other.

Active Adapters

Active adapters use additional chips to make the conversion inside the adapter, regardless of whether the source supports DP++. This means that active adapters are more expensive than passive adapters.

If you want to use multiple monitors with the same computer, you should use an active adapter because some video cards cannot run the maximum number of monitors while using DP++. This is especially true if the computer has more than one DisplayPort or Mini DisplayPort connection. Check with your video card manufacturer to confirm which type of adapter you need for the setup that you would like to run.

Note: You should use passive adapters with StarTech.com MST hubs, except when you are converting from DisplayPort to VGA, since that type of conversion requires active adapters.  For more information on using adapters with StarTech.com MST hubs, refer to the following FAQ: http://www.startech.com/faq/mst_hubs_passive_vs_active_adapters.

Surface Dock

If you experience issues when you connect passive video signal adapters to the Surface Dock, Microsoft recommends that you use active video signal converters instead. StarTech.com offers an active video signal converter for DVI monitors (MDP2DVIS) and for HDMI monitors (MDP2HD4KS).

Note: This issue does not apply to the Surface Pro 3 Docking Station.

Compliance and safety

Compliance letters

  • RoHS
    • Taal: English
  • WEEE
    • Taal: English

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Uitvoering en specificaties van het product zijn zonder aankondiging vatbaar voor wijzigingen.
Terug naar boven