Productcode: DVI2VGAMM3
Met de DVI2VGAMM3 91 cm lange, actieve DVI-naar-VGA-converterkabel kunt uw DVI-videobron direct op een VGA-scherm of -projector aansluiten, zonder dat u extra adapters of kabels nodig hebt.
Door gebruik van de juiste kabellengtes wordt kabelwarboel verminderd en kunt u uw videoapparaat netjes en professioneel aansluiten op een scherm op uw werkstation of een projector in uw klaslokaal of vergaderruimte.
De DVI2VGAMM3 is 91 cm lang, en onderdeel van een complete DVI-naar-VGA-adapterkabelserie, met twee andere kabels die 1,8 meter (DVI2VGAMM6) en 3 meter (DVI2VGAMM10) lang zijn, waardoor u de juiste kabellengte voor uw installatie kunt kiezen.
Laat u niet voor de gek houden door analoge DVI-adapters die met DVI-I-poort werken. Deze werken niet met uw digitale DVI-signaal, en passen zelfs niet in een DVI-D-poort.
De DVI2VGAMM3 is een end-to-end kabeladapteroplossing, waarbij u slechts één kabel nodig hebt om uw digitale DVI-D computer direct op uw VGA-scherm of -projector aan te sluiten, waardoor de problemen van het combineren van een DVI-naar-VGA-adapter met een logge VGA-kabel tot het verleden behoren; perfect dus voor het aansluiten van een met DVI uitgeruste POS-computer of -kiosk op een aanraakscherm dat alleen VGA ondersteunt.
Bovendien heeft de DVI2VGAMM3, in tegenstelling tot de meeste digitale DVI-naar-VGA-adapters die een stopcontact nodig hebt voor het converteren van het videosignaal, geen externe voeding nodig bij de meeste installaties. Voor nog meer gemak en compatibiliteit met DVI-videokaarten met een lage voedingsspanning is de DVI2VGAMM3 voorzien van een optionele geïntegreerde USB-voeding (USB-kabel niet meegeleverd), waardoor het een perfecte oplossing is voor projectors in vergaderruimtes of klaslokalen waarvoor een eenvoudige installatie vereist is, en die moeten kunnen werken met meer dan één computersysteem.
In het verleden was het converteren van digitale DVI naar VGA moeilijk en kostbaar en dat vaak resulteerde in de upgrade naar een DVI-D scherm. Voorkom upgradekosten door uw DVI-D videobron aan te sluiten op uw bestaande VGA-scherm met de DVI2VGAMM3. Omdat de adapterkabel videoresoluties tot 1920x1200 ondersteunt, kunt u ervan verzekerd zijn dat u uw bestaande VGA-scherm of -projector kunt gebruiken en high-definition videokwaliteit kunt behouden.
De DVI2VGAMM3 wordt gedekt door een 3-jarige garantie en gratis levenslange technische ondersteuning van StarTech.com.
Warranty Information | Warranty | 3 Years |
---|---|---|
Connector(en) | 1 - Type connector(en) | USB Micro-B (5-polig) |
1 - Connector A | DVI-D (25-polig) | |
1 - Connector B | VGA (15-polig, D-Sub met hoge dichtheid) | |
Fysieke eigenschappen | Kabellengte | 90 cm [35,4 in] |
Lengte product | 90,0 cm [35,4 in] | |
Breedte product | 40,0 mm [1,6 in] | |
Hoogte product | 15,0 mm [0,6 in] | |
Gewicht product | 70,0 g [2,5 oz] | |
Gebruiksomgeving | Bedrijfstemperatuur | 0°C to 60°C (32°F to 140°F) |
Opslagtemperatuur | -10°C to 70°C (14°F to 158°F) | |
Vochtigheid | 40% - 85% rel. luchtvochtigheid | |
Hardware | Active or Passive Adapter | Actief |
AV-ingang | DVI-D | |
AV-uitgang | VGA | |
Audio | Nee | |
Chipsetcode | Chrontel - 7101A | |
Prestaties | Maximale kabellengte | 90 cm [35,4 in] |
Maximale analoge resoluties | 1920 x 1200 | |
Maximale digitale resoluties | PC resolutions up to 1920 x 1200 @ 60 Hz | |
Verpakkingsinformatie | Package Height | 23,0 mm [0,9 in] |
Package Length | 22,0 cm [8,7 in] | |
Verzendgewicht (verpakt) | 88,6 g [3,1 oz] | |
Package Width | 20,0 cm [7,9 in] | |
Voeding | Inclusief voedingsadapter | Gevoed via USB |
Wat wordt er meegeleverd | 1 - Meegeleverd | 0,9 m DVI-D-naar-VGA-converterkabel |
Wij staan altijd klaar om al uw vragen te beantwoorden.
Chat Live (opens in new window)Wij staan altijd klaar om al uw vragen te beantwoorden.
Chat Live (opens in new window)When you troubleshoot issues with a video adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Video cables
Video adapter
Video source (such as a DVD player or computer)
Video destination (such as a monitor or projector)
To test your setup components, try the following:
Use the cable, video adapter, video source, and video destination in another setup to see if the problem is with the components or the setup.
Use a different cable, video adapter, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cables, it is recommended that you do the following:
Test each cable individually.
Use short cables when you are testing.
When you test the video source and video destination, it is recommended that you do the following:
Remove the video adapter from your setup and test to make sure that the video source and video destination work together without the video adapter.
Test to make sure that the video source and video destination work together at the resolution that you want to use.
Note: In order for your setup to work properly, the video source, adapter, and destination all need to support the resolution that you are using.
This is an active video signal converter.
A passive video signal converter changes the type of connection that is being used but does not change the signal that passes through the converter. Because the video signal is not modified, passive converters tend to be smaller, simpler, and less expensive than active video signal converters. Examples of passive converters include DVI-I to VGA, HDMI to DVI, and DisplayPort to Mini-DisplayPort converters.
An active video signal converter modifies both the type of connection that is being used and the signal that passes through the converter. Because this type of conversion can be complex, active converters tend to be larger than passive video signal converters and sometimes require additional power. Examples of active converters include DVI-D to VGA, HDMI to DisplayPort, and VGA to HDMI converters.
For more information about passive and active DisplayPort video signal converters, refer to the following FAQ: https://www.startech.com/faq/DisplayPort_Converter_DP_Multi_Mode.
For more information about which type of video signal converter you should use when you convert video signals with an MST hub, refer to the following FAQ: https://www.startech.com/faq/mst_hubs_passive_vs_active_adapters.
Digital Visual Interface (DVI) is a video display interface that can contain different types of signaling, based on the application. DVI cables and ports are created using different connector types to identify what application they are intended to be used in. The connector types are identified by the number of pins on the DVI connector. DVI comes in the following five different connector types:
Single and Dual link DVI indicate the maximum resolution capabilities of the video source or video destination. The maximum resolutions are Single Link (1920 x 1080 @ 60Hz) and Dual Link (2560 x 1600 @ 60Hz).
Note: The maximum resolution of your video source and video destination are ultimately determined by the technical specifications of the devices. The connector type is not a definitive indicator of the maximum resolution.
DVI-A carries only analog (for example, VGA) with no digital component. DVI-D carries only digital video (for example, HDMI) with no analog component. DVI-I combines DVI-A and DVI-D connections to include both analog and digital components. A DVI-I port may be on either your video source or display, but whether or not a display carries either or both analog and digital sources depends on the technical specifications of your device.