Niet meer leverbaar

Mini DisplayPort naar HDMI actieve video- en audio adapter / converter - Mini DP naar HDMI - 1920x1200 - wit

Sluit een HDMI®-scherm op een monomode Mini DisplayPort®-videobron aan

Productcode: MDP2HDSW

  • Ondersteunt schermresoluties tot 1920x1200 (WUXGA)
  • Voldoet aan DisplayPort 1.1a, HDCP 1.3
  • Compatibel met Intel® Thunderbolt™ met DisplayPort-uitgang

De MDP2HDSW witte Mini DisplayPort® naar HDMI® adapter beschikt over audio-doorvoer ondersteuning, waardoor u een HDMI-monitor, -projector of -scherm kunt aansluiten op zowel de audio- als video-uitgang van een met Mini DisplayPort uitgeruste desktop- of laptopcomputer.

Door zijn slanke design en uniform uiterlijk is deze witte Mini DisplayPort naar DMI-adapter ideaal voor Mac-gebruikers.

In tegenstelling tot een passieve adapter zet de MDP2HDS actief single mode en dual mode Mini DisplayPort-uitgangssignalen om, wat ideaal is voor grafische kaarten die geen dual mode/multi-mode (DP++) signalen verzenden, zoals ATI™ Eyefinity-kaarten.

Deze actieve Mini DP-naar-HDMI®-adapter is compatibel met Intel® Thunderbolt™, wanneer de adapter via een Thunderbolt I/O-poort rechtstreeks op een ondersteunende DisplayPort wordt aangesloten.

Gedekt door een StarTech.com3 jarige garantie en gratis levenslange technische ondersteuning.

Toepassingen

  • Gebruik een bestaande HDMI-monitor of -projector eens voor een nieuwe, met Mini DisplayPort uitgeruste computer of als een secundair scherm
  • Gebruik uw HDMI®-monitor als secundair beeldscherm

Het voordeel van StarTech.com

  • Ondersteunt zowel multimode (DP++) als single-mode DisplayPort-uitgangssignalen, via actieve Mini DisplayPort®-conversie
  • Wit uniform ontwerp is ideaal voor Mac-gebruikers

Partnernummers

  • Ingram Micro Belgium 2374373
  • UPC 065030849500

Specificaties

Warranty Information Warranty 3 Years
Connector(en) 1 - Connector A Mini-DisplayPort (20-polig)
1 - Connector B HDMI (19-polig)
Fysieke eigenschappen Kleur Wit
Lengte product 21,1 cm [8,3 in]
Breedte product 40 mm [1,6 in]
Hoogte product 15 mm [0,6 in]
Gewicht product 0 g [0,0 oz]
Gebruiksomgeving Bedrijfstemperatuur 0°C to 60°C (32°F to 140°F)
Opslagtemperatuur 0°C to 70°C (32°F to 158°F)
Vochtigheid 40% - 85% rel. luchtvochtigheid
Hardware Active or Passive Adapter Actief
AV-ingang Mini DisplayPort - 1.2
Adapterstijl Adapters
AV-uitgang HDMI - 1.4
Audio Ja
Industriestandaarden HDCP
DisplayPort 1.1
Prestaties Audiospecificaties HDMI - 7.1 Channel Audio
Maximum Cable Distance To Display 15,2 m [49,9 ft]
Maximale digitale resoluties 1920x1200
Ondersteuning breedbeeld: Ja
Verpakkingsinformatie Package Length 22 cm [8,7 in]
Package Width 20 cm [7,9 in]
Package Height 20 mm [0,8 in]
Verzendgewicht (verpakt) 0 g [0,0 oz]
Wat wordt er meegeleverd 1 - Meegeleverd Mini-DisplayPort®-naar-HDMI® actieve adapter

Accessoires

HDMM6

1,8m High Speed HDMI-kabel – Ultra HD 4k x 2k HDMI-kabel – HDMI naar HDMI M/M

Maak Ultra HD-verbindingen tussen uw High Speed HDMI®-apparaten

Uw prijs
€8,99 EUR excl. VAT
€10,88 EUR incl. VAT

Drivers/Downloads

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Datasheet

Productondersteuning

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Veelgestelde vragen (FAQ)

Installatie

This device is plug and play. It does not use any drivers, and does not require any setup tasks other than plugging in the source (for example, a computer) and the destination (for example, a monitor).

Troubleshooting

When you troubleshoot issues with a video adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • Video adapter

  • Video source (such as a DVD player or computer)

  • Video destination (such as a monitor or projector)

To test your setup components, try the following:

  • Use the cable, video adapter, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different cable, video adapter, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the video adapter from your setup and test to make sure that the video source and video destination work together without the video adapter.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, adapter, and destination all need to support the resolution that you are using.

Try the following:

  1. Check that the monitor’s video port works with another source.
  2. Check that the cables between the source and the destination work with other equipment.
  3. Check whether the video adapter works with another source and another destination.

The error “Out of Range” normally means that the resolution being output by the computer is not compatible with the display. Try lowering the resolution to see if that helps resolve the issue.  You may need to connect another monitor or restart the computer or source to accomplish this.

If a DisplayPort converter with audio is not passing sound from the source to the destination, complete the following:

  1. Make sure that the DisplayPort connection on the video card is the default audio playback device.
  2. Make sure that the video card has the DisplayPort audio codec installed. If not, visit the video card manufacturer's website to find out how to update the video card driver.

Voor uw aanschaf

Unfortunately no, this device has an intended source and an intended destination.  Refer to the title of the webpage for this order.

When you convert video from a source that uses DisplayPort or Mini DisplayPort to DVI or HDMI (for example, a computer to a monitor), you will need to consider the difference between passive and active adapters.

If the source supports dual-mode DisplayPort (also known as DP++), then you can use a passive adapter because the source can perform the conversion. If the source does not support DP++, then you need to use an active converter, which includes additional chips to perform the conversion.

Thunderbolt ports support DP++ natively. To run multiple monitors from the same computer, refer to the Active Adapters section below.

Passive Adapters

Passive adapters are less expensive since they do not need to include additional chips. A quick way to check whether you can use a passive adapter is to see if the DisplayPort or Mini DisplayPort source has the DP++ symbol above it. The symbol is a D with a P inside of it, with two + signs to the left, one on top of the other.

Active Adapters

Active adapters use additional chips to make the conversion inside the adapter, regardless of whether the source supports DP++. This means that active adapters are more expensive than passive adapters.

If you want to use multiple monitors with the same computer, you should use an active adapter because some video cards cannot run the maximum number of monitors while using DP++. This is especially true if the computer has more than one DisplayPort or Mini DisplayPort connection. Check with your video card manufacturer to confirm which type of adapter you need for the setup that you would like to run.

Note: You should use passive adapters with StarTech.com MST hubs, except when you are converting from DisplayPort to VGA, since that type of conversion requires active adapters.  For more information on using adapters with StarTech.com MST hubs, refer to the following FAQ: http://www.startech.com/faq/mst_hubs_passive_vs_active_adapters.

Surface Dock

If you experience issues when you connect passive video signal adapters to the Surface Dock, Microsoft recommends that you use active video signal converters instead. StarTech.com offers an active video signal converter for DVI monitors (MDP2DVIS) and for HDMI monitors (MDP2HD4KS).

Note: This issue does not apply to the Surface Pro 3 Docking Station.

Compliance and safety

Compliance letters

  • WEEE
    • Taal: English
  • RoHS
    • Taal: English

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Uitvoering en specificaties van het product zijn zonder aankondiging vatbaar voor wijzigingen.
Terug naar boven