USB-C naar DisplayPort multi-monitor video splitter - 3 poorts MST hub

Gebruik deze adapter voor het aansluiten van drie onafhankelijke schermen op één USB Type-C poort

Productcode: MSTCDP123DP

  • Maximaliseer uw productiviteit door drie schermen via de DisplayPort splitter op uw computer aan te sluiten
  • De MST hub biedt een multi-monitor oplossing die goedkoper is dan traditionele computer docking stations
  • MST-technologie maakt gebruik van uw bestaande videokaart om het gebruik van systeembronnen tot een minimum te beperken
Uw prijs
€163,99 EUR excl. VAT
€198,43 EUR incl. VAT

Met deze 3-poorts USB-C naar DisplayPort MST hub kunt u drie DisplayPort schermen op uw USB Type-C Windows apparaat aansluiten, zodat u uw productiviteit gemakkelijk kunt maximaliseren.

Multitasking eenvoudig gemaakt

Nu apparaten steeds mobieler worden dan ooit tevoren, kunt u over minder video-uitgangen beschikken, waardoor u dus alleen uw kleine geïntegreerde scherm kunt gebruiken. Deze MST hub lost dat probleem op omdat u drie schermen op uw USB-C computer kunt aansluiten, zodat multitasken nog gemakkelijker wordt.

Met deze USB-C naar DisplayPort splitter kunt u uw scherm op aanvullende schermen spiegelen of onafhankelijke content naar elk scherm streamen, waardoor hij het ideale accessoire voor reizen of hot-desking is.

Vergroot uw productiviteit met meerdere schermen

Verbazingwekkende beeldkwaliteit

Multi-Stream Transport (MST) technologie maakt gebruik van uw bestaande videokaart om het gebruik van systeembronnen tot een minimum te beperken, terwijl u tegelijkertijd UHD 4K resoluties voor tot twee schermen kunt bieden. Omdat de multi-monitor splitter ook HD 1080p op drie onafhankelijk schermen kan weergeven, is hij perfect voor alle high-resolution applicaties zoals grafisch ontwerp en medische beeldvorming.

productiviteitssoftware op drie schermen

Probleemloze installatie

MST kan eenvoudig worden geïnstalleerd, omdat het natief werkt op elk Windows apparaat dat DP Alt Mode over USB Type-C ondersteunt. Deze USB-C multi-monitor adapter is Thunderbolt 3 compatibel en biedt plug & play installatie zonder dat stuurprogramma's of software vereist zijn. Bovendien wordt deze DP MST hub door de USB-C poort gevoed, d.w.z. dat geen externe voedingskabels noodzakelijk zijn.

Breid uw compatibiliteit uit

De MSTCDP123DP wordt gedekt door een 3-jarige garantie en gratis levenslange technische ondersteuning van StarTech.com.

Toepassingen

  • Sluit extra schermen aan op uw USB-C apparaat
  • Gebruik één scherm voor referentiedata zoals websites, terwijl u op een ander scherm uw documenten opstelt
  • Combineer meerdere schermen tot een scherm zodat u niet meer zijwaarts hoeft te scrollen
  • Maak een panoramische videowand voor DisplayPort narrowcasting-toepassingen
  • Bewerk beelden, video- of audioclips op twee schermen in elke stand of met elke resolutie

Partnernummers

  • Ingram Micro Belgium 3702038
  • D&D Distribution MSTCDP123DPCA
  • Tech Data - Belgium 4662389
  • UPC 065030864503

Compatibility

  • Windows 8 logo
  • Windows 10 logo
Windows 10, 8.1, 8

Specificaties

Warranty Information Warranty 3 Years
Connector(en) 1 - Connector A USB-C (24-polig) DisplayPort Alt Mode
3 - Connector B DisplayPort (20-polig)
Fysieke eigenschappen Kleur Zwart
Type behuizing Kunststof
Kabellengte 32.2 cm [12.7 in]
Lengte product 78 mm [3.1 in]
Breedte product 60 mm [2.4 in]
Hoogte product 18 mm [0.7 in]
Gewicht product 86 g [3.0 oz]
Gebruiksomgeving Bedrijfstemperatuur 0°C to 45°C (32°F to 113°F)
Opslagtemperatuur -20°C to 70°C (-4°F to 158°F)
Hardware AV-ingang USB-C
Poorten 3
AV-uitgang DisplayPort - 1.2
Audio Ja
Chipsetcode MegaChips - STDP4320
VIA/VLI - VL100
Prestaties Audiospecificaties DisplayPort - 5.1 Channel Audio
Maximum Cable Distance To Display 2 m [6.6 ft]
Maximale digitale resoluties 3840x2160 @ 30hz
Ondersteunde resoluties

Note: MST shares 21.6 Gbps across all attached displays. Higher resolutions can restrict the available bandwidth with the remaining ports, please see our guideline below for determining an ideal resolution for your setup.

Average resolution bandwidth allocation

1920x1080 (High-definition 1080p) @60hz - 22%
1920x1200 @60hz - 30%
2560x1440 @60hz - 35%
2560x1600 @60hz - 38%
3840 x 2160 (Ultra HD 4K) @30hz - 38%

Note: Exceeding 100% will reduce functionality.

Ondersteuning breedbeeld: Ja
Software Besturingssystemen Windows 10, 8.1, 8
Speciale opmerkingen / vereisten Notitie Your USB-C equipped device must support video (DP alt mode) to work with this adapter
Verpakkingsinformatie Package Length 17.5 cm [6.9 in]
Package Width 14.5 cm [5.7 in]
Package Height 30 mm [1.2 in]
Verzendgewicht (verpakt) 169 g [6.0 oz]
Wat wordt er meegeleverd 1 - Meegeleverd MST hub
verkorte handleiding

Accessoires

DISPLPORT10L

3m DisplayPort 1.2 kabel met vergrendeling M/M - DP 4k kabel - zwart

Maak 4K x 2K hoge-resolutieverbindingen met HBR2-ondersteuning tussen uw DisplayPort apparaten

Uw prijs
€24,99 EUR excl. VAT
€30,24 EUR incl. VAT
DP2HDMI

DisplayPort naar HDMI Video Adapter Converter

Sluit uw HDMI-monitor of HDTV aan op een computer met DisplayPort

Uw prijs
€28,99 EUR excl. VAT
€35,08 EUR incl. VAT
DP2VGA3

DisplayPort 1.2 naar VGA adapter / converter - DP naar VGA - 1920x1200

Sluit een DisplayPort 1.2-computer aan op een VGA-scherm of -projector

Uw prijs
€28,99 EUR excl. VAT
€35,08 EUR incl. VAT
DP2DVI2

DisplayPort naar DVI Video Adapter Converter

Sluit uw DVI-monitor aan op een computer met DisplayPort

Uw prijs
€15,99 EUR excl. VAT
€19,35 EUR incl. VAT

Drivers/Downloads

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Handleiding:

Datasheet

Productondersteuning

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Veelgestelde vragen (FAQ)

Installatie

To set up a MST hub with your MST compatible system, complete the following:

  1. Plug the MST hub into a compatible DisplayPort 1.2 output from your computer.
  2. Plug the power into the MST hub.
  3. Plug your DisplayPort monitors or DisplayPort adapters/converters into the MST hub.
  4. Turn on your computer.

You should be able to detect the monitors in the display properties of your operating system.

If you are not getting any additional displays, try the following:

  • Verify that the latest display drivers are installed.
  • Press and hold the Scan button for five seconds on the MST hub.

When the monitors are detected in the display properties of your operating system, make sure that the resolutions that you are setting do not exceed the total data throughput of the DisplayPort host connection. You can verify the total data throughput (bandwidth) under the Product Overview tab for you device.

Troubleshooting

When you troubleshoot issues with an MST hub, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • Video source

  • Video destination

  • MST Hub

To test your setup components, try the following:

  • Use the video cables, video source, video destination, and MST hub in another setup to see if the problem is with the components or the setup.

  • Use a different video cable, video source, video destination, and MST hub in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

  • Eliminate the use of adapters, extenders, or splitters where possible.

When you test the MST hub with your computer system, do the following:

  • Make sure that the computer/graphics adapter is MST compatible. For more information, refer to the following FAQ: http://www.startech.com/faq/mst-hubs-gpu-compatibility.

  • Make sure that the latest graphics drivers are installed. The latest drivers are available on the website of the manufacturer of the graphics adapter.

  • Use compatible adapters. For example, DisplayPort to HDMI and not HDMI to DisplayPort.

Note: Drivers are not required for the MST hub.

To check to see if Windows is detecting the monitor, on a computer that is running a version of Windows 8 or Windows 10, do the following:

  1. On your keyboard, press the Windows key + X and click Control Panel.
  2. Click Appearance and Personalization, then click Display.
  3. In the left column, click Resolution or Adjust Resolution. Your monitors will be displayed as numbered icons.
  4. To see which monitors are detected, click the Display menu.
  5. To display the numbers on each of the connected monitors and see how the operating system has assigned their positions, click Identify.

To check to see if Windows is detecting the monitor, on a computer that is running a version of Windows 7, do the following:

  1. Right-click on the desktop and click Screen Resolution.
  2. To see which monitors are detected, click the Display menu.
  3. In the left column, click Resolution or Adjust Resolution. Your monitors will be displayed as numbered icons.
  4. To display the numbers on each of the connected monitors and see how the operating system has assigned their positions, click Identify.

If you are experiencing flickering issues with the MST hub, your monitors may be at a 59 Hz refresh rate. If they are at 59 Hz, you need to adjust the refresh rate to 60 Hz. In order to change your monitor's refresh rate, complete the following:

  1. Right-click anywhere on your desktop.
  2. Click Screen resolution or Display settings.
  3. At the top of the screen, select the monitor that you want to change the refresh rate for.
  4. Click Advanced settings or Display adapter properties.
  5. On the Monitor tab, click the Screen refresh rate drop-down list.

Note: This step may vary depending on your operating system and graphics card.

If the displays connected to your MST hub do not wake up after your computer goes to sleep, change the input on the monitor(s) from Auto to the correct input (for example, DisplayPort or HDMI). This prompts the monitor to send its identification data to the correct port instead of scanning for ports when the signal is lost.

After you select the correct input on the monitor(s), press the Scan button to initiate the handshake (EDID) process. For more information on the Scan button, refer to the following FAQ: http://www.startech.com/faq/mst-hubs-scan-button.

If you set the monitor to the correct video port and press the Scan button and the issue is still not resolved, you need to disable sleep mode on your computer. To disable sleep on a computer running a version of Windows, complete the following:

  1. Open Control Panel.

  2. Click Power Options.

Note: Depending on how you have the View by options set in Control Panel, you might have to click Hardware and Sound to see Power Options.

  1. Click Change plan settings for the plan in use.

  2. For both entries, change Put the computer to sleep to Never.

  3. Click Save Changes.

Om uw muis goed te kunnen bewegen tussen schermen, moet u uw schermen in Windows aanpassen zodat deze overeenstemmen met de fysieke locatie van uw schermen op uw bureau. Daarvoor moet u de volgende stappen doorlopen afhankelijk van uw besturingssysteem:

Windows 10 en Windows  8

  1. Druk op uw toetsenbord op de Windows-toets + X en selecteer Configuratiescherm.
  2. Klik op Vormgeving en persoonlijke instellingen, en klik dan op Beeldscherm.
  3. Klik op de optie Resolutie of Resolutie aanpassen in de linkerkolom, waar uw beeldschermen als genummerde pictogrammen worden weergegeven.
  4. Klik op Identificeren om de nummers van elk aangesloten beeldscherm weer te geven; u ziet dan hoe het besturingssysteem de posities ervan heeft toegewezen.
  5. Klik op en versleep de beeldschermpictogrammen zodanig dat ze het best overeenkomen met uw eigen configuratie.
  6. Klik op OK om de wijzigingen toe te passen en sluit het venster.

Windows 7 en Windows Vista

  1. Klik op de knop Start en selecteer Configuratiescherm.
  2. Klik op Vormgeving en persoonlijke instellingen en klik dan op Beeldscherm.
  3. Klik op de optieResolutie of Resolutie aanpassen in de linkerkolom, waar uw beeldschermen als genummerde pictogrammen worden weergegeven.
  4. Klik op Identificeren om de nummers van elk aangesloten beeldscherm weer te geven; u ziet dan hoe het besturingssysteem de posities ervan heeft toegewezen.
  5. Klik op en versleep de beeldschermpictogrammen zodanig dat ze het best overeenkomen met uw eigen configuratie.
  6. Klik op OK om de wijzigingen toe te passen en sluit het venster.

Windows XP

  1. Klik op de knop Start en selecteer Configuratiescherm.
  2. Dubbelklik op Beeldscherm.
  3. Klik op het tabblad Instellingen, waarna uw beeldschermen als genummerde pictogrammen worden weergegeven.
  4. Klik op Identificeren om de nummers van elk aangesloten beeldscherm weer te geven; u ziet dan hoe het besturingssysteem de posities ervan heeft toegewezen.
  5. Klik op en versleep de beeldschermpictogrammen zodanig dat ze het best overeenkomen met uw eigen configuratie.
  6. Klik op OK om de wijzigingen toe te passen en sluit het venster.

Om het beeld van uw primaire beeldscherm te spiegelen in plaats van uw bureaublad uit te breiden, raadpleeg de volgende FAQ: http://www.startech.com/faq/Windows_Mirroring_Monitors

If a DisplayPort converter with audio is not passing sound from the source to the destination, complete the following:

  1. Make sure that the DisplayPort connection on the video card is the default audio playback device.
  2. Make sure that the video card has the DisplayPort audio codec installed. If not, visit the video card manufacturer's website to find out how to update the video card driver.

To output 4K to a DisplayPort display at 30Hz, your monitor must support the resolution and refresh rate. If your monitor also supports 4K at 60Hz (DP 1.2 or higher), you may also need to set the monitor to work at 30Hz. 

To resolve this issue, use the buttons on your monitor to change the DisplayPort settings to DP1.1. For more information about how to change your monitor settings, refer to the website of the manufacturer of your monitor.

Voor uw aanschaf

You may have heard of MST hubs, and have been wondering what they are, and whether or not they will work in your setup. 

So what are MST hubs?  MST hubs are devices that take one DisplayPort or Mini DisplayPort video connection, and go to many video connections, usually extra DisplayPort, Mini DisplayPort, DVI or HDMI connections.  This is accomplished through DisplayPort's MST, or Multi Stream Transport function.  MST hubs allow you to mirror / duplicate your monitors so the same window are shown on all of the monitors, or extend your desktop, so that you can have different window on each monitor.

So how can you tell if you can use a MST hub?  MST hubs require that the video card's DisplayPort or Mini DisplayPort output support DP1.2 or greater, which supports MST.  Some MST hubs also specifically require HBR2, or High Bit Rate 2 support.  HBR2 allows for higher resolutions like 4K and up.  You can check whether or not a StarTech.com MST hub requires HBR2 on the individual product pages, under the Technical Specifications tab.

There are a few other important things to note.

  • Video cards can technically support DP1.2, but not support MST or HBR2, so it is important to check with your video card manufacturer that your video card specifically supports DP1.2, MST, and HBR2 (if necessary).

Currently Mac OSX does not support MST hubs, regardless of whether or not the video card does.  This is an operating system restriction, so running Windows on an Apple computer through a program like Bootcamp will allow you to use MST hubs.

Recent versions of DisplayPort include the ability to split to multiple displays from one DisplayPort connection using Multi-Stream Transport (MST).

Although you will be able to connect the MST hub to the Mini DisplayPort (mDP) connection on your Mac, Mac OSX does not support MST for NVIDIA and Intel Graphics Processor Units (GPUs). This results in a mirrored image across the outputs of a MST hub and you will not be able to have multiple independent displays on your Mac.

The limitation of NVIDIA and Intel GPUs lies within Mac OSX. If a different operating system is used, such as Microsoft Windows via Bootcamp, you may be able to use the MST functionality of your Mac.

When you convert from DisplayPort to DVI or HDMI, it works best if you use passive video signal converters with StarTech.com MST hubs. The MST hub has the capability to convert a video signal DisplayPort to a DVI or HDMI video signal as long as a video signal converter is used to change the connection type. This is because DisplayPort 1.2 (DP 1.2) supports both MST (Multi-Stream Transport) and Dual Mode (DP++). For more information, refer to the following FAQ: http://www.startech.com/faq/displayport_converter_dp_multi_mode.

When you convert from DisplayPort to VGA, you must use an active adapter because DisplayPort uses a digital signal and VGA uses an analog signal, and the MST hub cannot convert from a digital signal to an analog signal.

Note: When you use a StarTech.com video signal converter to convert from DisplayPort to VGA, you should use the DP2VGA3. In certain circumstances, the DP2VGA2 has compatibility issues with certain VGA monitors.

Surface Dock

If you experience issues when you use a Surface Dock to connect passive video signal adapters to an MST hub, Microsoft recommends that you use active video signal converters instead. StarTech.com offers an active video signal converter for DVI monitors (DP2DVIS) and for HDMI monitors (DP2HD4KS).

Note: This issue does not apply to the Surface Pro 3 Docking Station.

You cannot use an MST hub to increase the maximum number of displays that a video card supports. For example, if your video card only supports up to three displays, your display limit will still be three displays even if you use an MST hub.

If you have multiple MST hubs connected to the same computer and are experiencing display issues, you should check your video card to make sure that it can support the number of displays that you are using in your setup.

If you use an MST hub in your setup, your video card also needs to be compatible with MST technology. For more information, refer to the following FAQ: https://www.startech.com/faq/mst-hubs-gpu-compatibility.

USB-C is a type of USB connector that is capable of supporting the following:

  • Data transfer speeds up to 10Gbps, if you use USB 3.1.
  • Bi-directional power delivery up to 100W, if both the USB host connection and the device support it.
  • Alternate modes, which deliver different types of data at different speeds. For example, DisplayPort Alternate Mode (DP Alt Mode).

If using Thunderbolt 3 over USB-C, the connection is capable of additional features. For example, Thunderbolt 3 is capable of 40Gbps of total bandwidth. For more information, refer to the following FAQ: https://www.startech.com/faq/thunderbolt-3-port-capabilities.

Not all USB-C ports or devices are capable of supporting all of the features listed above, or all of the features at the maximum capabilities. If you require a specific USB-C feature, your USB host connection, cables, and device must all support the feature that you require. For more information about whether your components support specific USB-C features, refer to the information provided by the manufacturers. 

This USB-C device requires that all of the following components support alternate modes:

  • The USB-C host connection (for example, a computer and its port)
  • The USB-C cable
  • The USB-C device (for example, a hard drive docking station)

If your host device includes a Thunderbolt™ 3 connection, this USB-C device will work with your host device.

For more information about the modes that your setup components support, refer to the information provided by the manufacturers.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Uitvoering en specificaties van het product zijn zonder aankondiging vatbaar voor wijzigingen.
Terug naar boven
Wacht...