USB C multiport adapter met HDMI - 4K - Mac / Windows - SD kaartlezer - USB C naar USB 3.0 hub - 2x USB-A 1x USB-C - 60W PD 3.0 - dock - VERBETERDE VERSIE VAN DKT30CSDHPD

Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).

To install the driver:

1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

2. Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
3. Select the appropriate folder for your operating system.
4. Right-click Setup.exe. 
5. Click Run as Administrator.

Note: If the Run as Administrator option is not available, you might be attempting to run the installer from within the zipped file. Extract the files using the instructions in Step 2.

6. Follow the on-screen prompts to install the device drivers and restart the computer when prompted.
7. Your computer will automatically complete the driver installation and your device should be ready to use.

Sometimes an on-board network interface card (NIC) conflicts with a new NIC.  In these cases it is best to disable the on-board NIC.

The best way to disable your on-board NIC is to go into your BIOS and disable it there if possible.  To do this, consult your motherboard manual.

You can also disable any NIC in Windows.  Here is how you do this:

First click Start, or, in Windows 10 and 8, hold down the Windows key and press X.  Then click Control Panel.

Windows 10

1. Click Network and Internet.
2. Click Network and Sharing Center.
3. On the left, click Change adapter settings.
4. Right-click the NIC that you would like to disable and select Disable.

Windows 8

1. Click Network and Sharing Center.
2. On the left, click Change adapter settings.
3. Right-click the NIC that you would like to disable and select Disable.

Windows 7

1. Click Network and Internet.
2. Click Network and Sharing Center.
3. On the left, click Change adapter settings.
4. Right-click the NIC that you would like to disable and select Disable.

Windows Vista

1. Click Network and Sharing Center.
2. On the left, click Manage network connections.
3. Right-click the NIC that you would like to disable and select Disable.

Windows XP

1. Click Network Connections.
2. Right-click the NIC that you would like to disable and select Disable.

If the USB device does not work after your computer has been in extended hibernation, it is likely that Windows has automatically turned off the USB Root hub to save power. 

The steps below outline how to configure the USB root hub to stay on during hibernation, to prevent this from happening.
 

Windows 10 / 8

1. On your keyboard, press the Windows key + X and select Control Panel.
2. Click Hardware and Sound, then click Power Options.
3. Click Change plan settings for the plan you want to change.
4. Click Change advanced power settings.
5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows 7 / Vista

1. Click the Start button and select Control Panel.
2. Click Hardware and Sound, then click Power Options.
3. Click Change plan settings for the plan you want to change.
4. Click Change advanced power settings.
5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows XP

1. On your desktop, right-click the My Computer icon and select Properties.
2. Click the Device Manager tab.
3. Expand Universal Serial Bus controllers by clicking the arrow to the left of it.
4. Right-click the first USB Root Hub device and select Properties.
5. Click the Power Management tab.
6. Clear the box next to Allow the computer to turn off this device to save power.
7. Click OK to apply the setting.
8. Repeat steps 4-7 for any remaining devices in the Universal Serial Bus Controllers section with “Root Hub” in the name.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

When you troubleshoot issues with a USB controller card, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

• USB cables

• USB devices

• USB controller card

To test your setup components, try the following:

• Use the USB cable, device, and controller card in another setup to see if the problem is with the components or the setup.

• Use a different USB cable, device, and controller card in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

• Test each cable individually.

• Use short cables when you are testing.

When you test the USB device and controller card, it is recommended that you do the following:

• Press the Windows key + R, type devmgmt.msc, and press Enter to open Device Manager. Check to see if your device is listed under Universal Serial Bus controllers.

• If you do not see the USB controller card listed in Device Manager please see this FAQ: https://www.startech.com/support/faqs/technical-support?topic=expansion-cards#pci-pcie-cannot-boot-os-or-detect-windows.

• If the device is listed with an error, follow the instructions on the website to reinstall the drivers.

Om uw muis goed te kunnen bewegen tussen schermen, moet u uw schermen in Windows aanpassen zodat deze overeenstemmen met de fysieke locatie van uw schermen op uw bureau. Daarvoor moet u de volgende stappen doorlopen afhankelijk van uw besturingssysteem:

Windows 10 en Windows  8

1. Druk op uw toetsenbord op de Windows-toets + X en selecteer Configuratiescherm.
2. Klik op Vormgeving en persoonlijke instellingen, en klik dan op Beeldscherm.
3. Klik op de optie Resolutie of Resolutie aanpassen in de linkerkolom, waar uw beeldschermen als genummerde pictogrammen worden weergegeven.
4. Klik op Identificeren om de nummers van elk aangesloten beeldscherm weer te geven; u ziet dan hoe het besturingssysteem de posities ervan heeft toegewezen.
5. Klik op en versleep de beeldschermpictogrammen zodanig dat ze het best overeenkomen met uw eigen configuratie.
6. Klik op OK om de wijzigingen toe te passen en sluit het venster.

Windows 7 en Windows Vista

1. Klik op de knop Start en selecteer Configuratiescherm.
2. Klik op Vormgeving en persoonlijke instellingen en klik dan op Beeldscherm.
3. Klik op de optieResolutie of Resolutie aanpassen in de linkerkolom, waar uw beeldschermen als genummerde pictogrammen worden weergegeven.
4. Klik op Identificeren om de nummers van elk aangesloten beeldscherm weer te geven; u ziet dan hoe het besturingssysteem de posities ervan heeft toegewezen.
5. Klik op en versleep de beeldschermpictogrammen zodanig dat ze het best overeenkomen met uw eigen configuratie.
6. Klik op OK om de wijzigingen toe te passen en sluit het venster.

Windows XP

1. Klik op de knop Start en selecteer Configuratiescherm.
2. Dubbelklik op Beeldscherm.
3. Klik op het tabblad Instellingen, waarna uw beeldschermen als genummerde pictogrammen worden weergegeven.
4. Klik op Identificeren om de nummers van elk aangesloten beeldscherm weer te geven; u ziet dan hoe het besturingssysteem de posities ervan heeft toegewezen.
5. Klik op en versleep de beeldschermpictogrammen zodanig dat ze het best overeenkomen met uw eigen configuratie.
6. Klik op OK om de wijzigingen toe te passen en sluit het venster.

Om het beeld van uw primaire beeldscherm te spiegelen in plaats van uw bureaublad uit te breiden, raadpleeg de volgende FAQ: http://www.startech.com/faq/Windows_Mirroring_Monitors

To confirm that Windows detects your USB device, complete the following:

1. Press the Windows key+R, type devmgmt.msc, and press Enter.
2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

To confirm that the Mac OS detects your USB device, complete the following:

1. Click the Apple icon.
2. Click About This Mac.
3. Click More Info or System Report.
4. Under the appropriate heading, confirm that your USB device is listed and that there isn't an error. For example, a network card would be under Ethernet Cards.

You may need to refresh the System Information page after you plug in your device.  To do so, press Command + R with the System Information page open.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Yes, you can use this laptop docking station to charge a laptop computer. 

For more information on what the requirements are and about how much power this laptop docking station provides, refer to the product manual.

USB-C is a type of USB connector that is capable of supporting the following:

• Data transfer speeds up to 10Gbps, if you use USB 3.1.
• Bi-directional power delivery up to 100W, if both the USB host connection and the device support it.
• Alternate modes, which deliver different types of data at different speeds. For example, DisplayPort Alternate Mode (DP Alt Mode).

If using Thunderbolt 3 over USB-C, the connection is capable of additional features. For example, Thunderbolt 3 is capable of 40Gbps of total bandwidth. For more information, refer to the following FAQ: https://www.startech.com/faq/thunderbolt-3-port-capabilities.

Not all USB-C ports or devices are capable of supporting all of the features listed above, or all of the features at the maximum capabilities. If you require a specific USB-C feature, your USB host connection, cables, and device must all support the feature that you require. For more information about whether your components support specific USB-C features, refer to the information provided by the manufacturers. 

This USB-C device requires that all of the following components support alternate modes:

• The USB-C host connection (for example, a computer and its port)
• The USB-C cable
• The USB-C device (for example, a hard drive docking station)

If your host device includes a Thunderbolt™ 3 connection, this USB-C device will work with your host device.

For more information about the modes that your setup components support, refer to the information provided by the manufacturers.