Niet meer leverbaar

Mini 4-poort USB 2.0-hub

Biedt 4 externe USB 2.0-poorten in een compacte en draagbare vormfactor

Productcode: ST4200MINI

  • TAA Compliant
  • High-speed USB 2.0-aansluiting met overdrachtsnelheden tot 480 Mbit/s
  • Uiterst compact en draagbaar ontwerp in zakformaat
Met de ST4200MINI Mini 4-poort USB-hub maakt u van een enkele USB-aansluiting vier USB-poorten, en door de compacte uitvoering is er voor de installatie maar weinig ruimte nodig. De mini 4-poort USB-hub is een ideaal laptopaccessoire voor het uitbreiden van het aantal beschikbare USB-aansluitingen en verbruikt maar weinig stroom, zodat u uw laptopaccu zo lang mogelijk kunt gebruiken. De minihub ondersteunt high-speed USB 2.0 met overdrachtsnleheden tot 480 Mbit/s, en aangezien de hub achterwaarts compatibel is met eerdere versies van USB, zal ook uw oudere USB-randapparatuur er perfect op werken.

Toepassingen

  • Maak moeilijk toegankelijke of vlak naast elkaar liggende USB-poorten toegankelijker door de hub ergens anders te plaatsen
  • Breid de USB-capaciteit van uw systeem uit met extra USB-poorten

Het voordeel van StarTech.com

  • Sluit tot 4 USB 2.0/1.x-apparaten tegelijk aan op hun eigen maximumsnelheden
  • Gevoed via USB en compact uitgevoerd voor een draagbaarheid en gemak in het gebruik
  • Met 2-jaar garantie en gratis levenslange technische ondersteuning door StarTech.com

Partnernummers

  • Ingram Micro Belgium 1580812
  • UPC 065030796996

Compatibility

Specificaties

Warranty Information Warranty 2 Years
Connector(en) Externe poorten 1 - USB Type-A (4-polig) USB 2.0
4 - USB Type-A (4-polig) USB 2.0
Fysieke eigenschappen Kleur Zilver
Type behuizing Kunststof
Lengte product 9 cm [3,5 in]
Breedte product 20 mm [0,8 in]
Hoogte product 1,3 cm [0,5 in]
Gewicht product 50 g [1,8 oz]
Gebruiksomgeving Bedrijfstemperatuur 0 to 40
Opslagtemperatuur 0 to 85
Hardware Poorten 4
Interface USB 2.0
Industriestandaarden USB 2.0
Indicatoren LED-indicatoren 1 - Power
Prestaties Maximale overdrachtsnelheid 480 Mbit/s
Software Besturingssystemen OS independent; No software or drivers required
Speciale opmerkingen / vereisten Systeem- en kabelvereisten Met USB uitgeruste computer
USB 2.0-snelheden alleen mogelijk met een USB 2.0-computer
Verpakkingsinformatie Package Length 17,3 cm [6,8 in]
Package Width 14,3 cm [5,6 in]
Package Height 30 mm [1,2 in]
Verzendgewicht (verpakt) 0,1 kg [0,2 lb]
Voeding Inclusief voedingsadapter Gevoed via USB
Uitgangsstroom 0.5A
Wat wordt er meegeleverd Meegeleverd 1 - 4-poort USB-hub
1 - Handleiding

Accessoires

USB2HAB6

1,8m gecertificeerde USB 2.0 A naar B kabel - M/M - zwart

Sluit USB 2.0 randapparatuur aan op uw computer

Uw prijs
€2,99 EUR excl. VAT
€3,62 EUR incl. VAT
USB2HAB10

3m USB 2.0 gecertificeerde A naar B Kabel - M/M

Sluit USB 2.0 randapparatuur aan op uw computer

Uw prijs
€4,99 EUR excl. VAT
€6,04 EUR incl. VAT
USB2HAB15

4,5m USB 2.0 A naar B Kabel - M/M

Sluit USB 2.0 randapparatuur aan op uw computer

Uw prijs
€5,99 EUR excl. VAT
€7,25 EUR incl. VAT

Drivers/Downloads

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Handleiding:

Datasheet

Productondersteuning

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Veelgestelde vragen (FAQ)

Troubleshooting

When you troubleshoot issues with a USB hub, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • USB A-to-B cable

  • Computer USB port

  • USB peripheral(s)

To test your setup components, try the following:

  • Use the USB cable and USB peripheral(s) in another setup to see if the problem is with the components or the setup.

  • Use a different USB cable, USB port, and USB peripheral in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the hub, make sure that you do the following:

  • If a power adapter is included, provide power to the USB hub.

  • Attach a USB peripheral. The USB hub will not appear in any hardware listings on your system, but USB devices do appear when they are connected.

  • Install the drivers for the USB peripheral.

  • Install the latest drivers for the USB controller and motherboard chipset.

Note: No drivers or software are required for the USB hub to work with your operating system. The USB hub works independently of software and works with any operating system.

When testing your USB peripherals, make sure that you do the following:

  • If required, attach external power.

  • Confirm that the peripheral works on a standard USB port.

If the USB peripheral(s) can be detected on a standard USB port and not on the hub, do the following:

  • Use a new USB A-to-B cable.

  • Test your setup using basic USB peripherals, such as a keyboard or mouse.

  • Test using another USB port.

If the USB device does not work after your computer has been in extended hibernation, it is likely that Windows has automatically turned off the USB Root hub to save power. 

The steps below outline how to configure the USB root hub to stay on during hibernation, to prevent this from happening.
 

Windows 10 / 8

  1. On your keyboard, press the Windows key + X and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows 7 / Vista

  1. Click the Start button and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows XP

  1. On your desktop, right-click the My Computer icon and select Properties.
  2. Click the Device Manager tab.
  3. Expand Universal Serial Bus controllers by clicking the arrow to the left of it.
  4. Right-click the first USB Root Hub device and select Properties.
  5. Click the Power Management tab.
  6. Clear the box next to Allow the computer to turn off this device to save power.
  7. Click OK to apply the setting.
  8. Repeat steps 4-7 for any remaining devices in the Universal Serial Bus Controllers section with “Root Hub” in the name.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Voor uw aanschaf

It is possible to use some USB hubs without a power supply, however, doing so may prevent certain high-power USB peripherals from operating.

When a power adapter is not used on a hub that comes with a power adapter, power is drawn from the USB port on the computer and then divided between the ports on the hub. This reduces the power delivery to individual ports and high-powered USB peripherals, such as external hard drives, may not start.

On USB hubs that can use a power adapter, more power can be supplied to USB ports than what is possible with a single USB port.

If your USB peripherals require power adapters, they probably do not require power from the USB port and can be used on a USB hub without a power adapter. With USB peripherals that use power adapters, the USB ports on the hub are only used for data transfer and do not draw power from the hub.

USB peripherals that require low power (for example, keyboards and mice) can be used on hubs without a power adapter, in conjunction with other low-power USB peripherals. In this case, power is drawn from the computer's USB port, as described above.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Uitvoering en specificaties van het product zijn zonder aankondiging vatbaar voor wijzigingen.
Terug naar boven