Productcode: USB3SDOCKD
Het USB3SDOCKD Universele USB 3.0 Docking Station/Port Replicator met DVI, Audio en Ethernet voegt een externe video-uitgang, hoofdtelefoon en microfoonaansluitingen toe, evenals Gigabit Ethernet en extra USB 3.0 en USB 2.0-poorten, allemaal via een enkel apparaat en een enkele SuperSpeed USB 3.0-aansluiting.
Met deze zeer veelzijdige poortreplicator/universeel docking station kunt u de primaire desktop van uw computer spiegelen of uitbreiden tot videoresoluties van max. 1920x1200, met een DVI-schermuitgang en meegeleverde DVI-naar-VGA-adapter.
Het docking station combineert ook USB 2.0- en USB 3.0-hubs, hoofdtelefoon- en microfoonaansluitingen en een Gigabit Ethernet RJ45-poort in een alles-in-een laptop/notebook docking station - het perfecte accessoire voor gebruikers die thuis of op kantoor allerlei apparaten aan moeten kunnen sluiten en beheren op hun laptop.
De USB3SDOCKD wordt gedekt door een 3-jarige garantie en gratis levenslange technische ondersteuning van StarTech.com.
Warranty Information | Warranty | 3 Years |
---|---|---|
Connector(en) | 1 - Type connector(en) | RJ-45 |
USB Type-B (9-polig) USB 3.0 | ||
2 - Type connector(en) | USB Type-A (9-polig) USB 3.0 (5 Gbps) | |
4 - Type connector(en) | USB Type-A (4-polig) USB 2.0 | |
2 - Type connector(en) | 3,5 mm mini-jack (3 standen) | |
1 - Type connector(en) | DVI-I (29-polig) | |
Fysieke eigenschappen | Kleur | Zwart |
Type behuizing | Kunststof | |
Lengte product | 19,6 cm [7,7 in] | |
Breedte product | 77 mm [3,0 in] | |
Hoogte product | 12,6 cm [5,0 in] | |
Gewicht product | 364 g [12,8 oz] | |
Gebruiksomgeving | Bedrijfstemperatuur | 10°C to 40°C (50°F to 104°F) |
Opslagtemperatuur | -10°C to 80°C (14°F to 176°F) | |
Hardware | 4K ondersteuning | Nee |
Snellaadpoort(en) | Nee | |
Ondersteunde schermen | 1 | |
Bus type | USB 3.0 | |
Industriestandaarden | IEEE 802.3, 802.3u en 802.3ab | |
Chipsetcode | DisplayLink - DL-3700 VIA/VLI - VL810 Terminus - FE1.1 Realtek - RTL8211E |
|
Indicatoren | 1 - LED-indicatoren | USB-hubverbinding (blauw) |
Power (blauw) | ||
Prestaties | Maximale digitale resoluties | 1920 x 1200 |
Type en snelheid | USB 2.0 - 480 Mbit/s | |
USB 3.0 - 4.8 Gbit/s | ||
Compatibele netwerken | 10/100/1000 Mbps | |
Auto MDIX | Ja | |
Full duplex ondersteuning | Ja | |
Software | Besturingssystemen | Windows® XP SP3 (32-bits), Vista, 7, 8, 8.1, 10 macOS 10.6 tot 10.12, 10.14 - 10.15, 11.0 |
Speciale opmerkingen / vereisten | Systeem- en kabelvereisten | CPU: i3 Dual Core 2,8 GHz of beter RAM: 2 GB of meer Vrije USB 3.0-poort |
Notitie | Uitgebreide schermen worden momenteel alleen ondersteund bij DisplayLink producten met macOS 10.11 tot 10.13.3. Dit kan in toekomstige versies veranderen. | |
Verpakkingsinformatie | Verpakkingsaantal | 1 |
Package Length | 27,5 cm [10,8 in] | |
Package Width | 19 cm [7,5 in] | |
Package Height | 11 cm [4,3 in] | |
Verzendgewicht (verpakt) | 920 g [32,5 oz] | |
Voeding | Inclusief voedingsadapter | Inclusief wisselstroomadapter |
Ingangsspanning | 100 - 240 AC | |
Uitgangsspanning | 5 DC | |
Uitgangsstroom | 4A | |
Vermogensopname | 20 | |
Wat wordt er meegeleverd | 1 - Meegeleverd | USB 3. 0 Docking Station |
USB 3.0-kabel | ||
Universele voedingsadapter: is geschikt voor NA/EU/GB wanneer gekocht in NA/EU/GB; is geschikt voor Australië en Nieuw-Zeeland wanneer gekocht in Australië en Nieuw-Zeeland. | ||
DVI naar VGA adapter | ||
Driver-CD | ||
Handleiding |
Sluit uw USB Type-C laptop aan op een ouder USB randapparaat, met deze duurzame adapter
Vervang uw zoekgeraakte of defecte voedingsadapter
Wij staan altijd klaar om al uw vragen te beantwoorden.
Chat Live (opens in new window)Wij staan altijd klaar om al uw vragen te beantwoorden.
Chat Live (opens in new window)Note: Do not physically connect the USB laptop docking station to your computer until you are instructed to (Step 6).
Note: Installation may take several seconds to complete. During the installation your display might flicker. This is normal. Once the installation is complete you will see your Windows desktop extended to the additional monitor(s).
Note: Do not physically connect the USB laptop docking station to your computer until instructed to (Step 6).
Note: Installation may take several seconds to complete. During the installation your display may flicker. This is normal. Once the installation has completed you will see your Windows desktop extended to the additional monitor.
Note: Do not physically connect the laptop docking station to your computer until instructed to (Step 7).
Note: Mac OS X will typically save the files to the Downloads folder that is associated with your user account (for example, hard_drive_name\Users\your_name\Downloads).
Note: Installation might take several seconds to complete. During the installation your display might flicker; this is normal. Once the installation has completed you will see your Macintosh desktop extended to any connected monitors.
To install your USB laptop docking station in Ubuntu 15.0 (kernel 3.16), you need to download the Dynamic Kernel Module Support (DKMS) package and the adapter driver.
To install the DKMS package, complete the following:
When the DKMS package is installed, complete the following:
Note: Ubuntu typically saves the files to the Downloads folder that is associated with your user account (for example, ~/Downloads).
Note: It can take several minutes to complete the installation. During this time, your display might flicker, but this is normal behavior. When the installation is complete, your Ubuntu desktop is extended to the additional monitor.
Als het beeldscherm dat via uw USB-beeldschermadapter is aangesloten niet wordt ingeschakeld nadat het langere tijd in de slaapstand heeft gestaan, heeft Windows waarschijnlijk automatisch de USB root hub uitgeschakeld om energie te besparen.
De onderstaande stappen beschrijven hoe u de USB root hub zodanig configureert dat het beeldscherm ingeschakeld blijft als het in de slaapstand staat, zodat dit probleem niet meer voorkomt.
Windows 8 / 10
NB: U moet wellicht uw USB-beeldschermadapter loskoppelen en weer aansluiten nadat u deze instellingen hebt toegepast om weer verbinding te maken.
Windows 7 / Vista
NB: U moet wellicht uw USB-beeldschermadapter loskoppelen en weer aansluiten nadat u deze instellingen hebt toegepast om weer verbinding te maken.
Windows XP
NB: U moet wellicht uw USB-beeldschermadapter loskoppelen en weer aansluiten nadat u deze instellingen hebt toegepast om weer verbinding te maken.
Sometimes an on-board network interface card (NIC) conflicts with a new NIC. In these cases it is best to disable the on-board NIC.
The best way to disable your on-board NIC is to go into your BIOS and disable it there if possible. To do this, consult your motherboard manual.
You can also disable any NIC in Windows. Here is how you do this:
First click Start, or, in Windows 10 and 8, hold down the Windows key and press X. Then click Control Panel.
Windows 10
Windows 8
Windows 7
Windows Vista
Windows XP
When you troubleshoot issues with a laptop docking station, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Video cables
Video source
Video destination
Laptop docking station
USB peripherals
Ethernet connection
To test your setup components, try the following:
Use the video cables, video source, video destination, laptop docking station, USB peripherals, and Ethernet connection in another setup to see if the problem is with the components or the setup.
Use a different video cable, video source, video destination, laptop docking station, USB peripherals, and Ethernet connection setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cables, it is recommended that you do the following:
Test each cable individually.
Use short cables when you are testing.
When you test the video cables, video source, video destination, and laptop docking station it is recommended that you do the following:
Press the Windows key + R, type devmgmt.msc, and press Enter to open Device Manager.
If you do not see the USB video adapter in Device Manager, refer to the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=expansion-cards#usb-cannot-detect-windows.
If the device is listed with an error, reinstall the drivers following the instructions on the website.
Check to see if your video card drivers are current. You can check what video card you have in Device Manager under Display adapters. It is recommended that you go directly to the video card manufacturer's website to check for the latest drivers.
Check to see if the monitor is being detected by Windows.
For more information about testing the USB peripherals and the laptop docking station, visit www.startech.com/faq/usb_hubs_general_troubleshooting.
When you test Ethernet and the laptop docking station, refer to the following FAQ: http://www.startech.com/faq/network_adapters_general_troubleshooting.
When you test sound and the laptop docking station, refer to the following FAQ: http://www.startech.com/faq/sound_cards_general_troubleshooting.
If hardware acceleration is enabled on any of your software applications, it can result in poor resource management and limit the performance of your video device. If you experience this problem, you should disable hardware acceleration in the program(s) that were impacted.
To disable hardware acceleration in common applications and operating systems, complete one of the following series of steps, depending on what software application(s) or operating system that you are running.
Internet Explorer 9 and later
Note: Earlier versions of Internet Explorer do not use hardware acceleration.
Mozilla Firefox
Google Chrome
Microsoft Office 2013 / 2010
Windows 10 / 8
Windows 7 / Vista
Windows XP
To confirm that Windows detects your USB device, complete the following:
Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.
To confirm that the Mac OS detects your USB device, complete the following:
You may need to refresh the System Information page after you plug in your device. To do so, press Command + R with the System Information page open.
Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.
Digital Visual Interface (DVI) is a video display interface that can contain different types of signaling, based on the application. DVI cables and ports are created using different connector types to identify what application they are intended to be used in. The connector types are identified by the number of pins on the DVI connector. DVI comes in the following five different connector types:
Single and Dual link DVI indicate the maximum resolution capabilities of the video source or video destination. The maximum resolutions are Single Link (1920 x 1080 @ 60Hz) and Dual Link (2560 x 1600 @ 60Hz).
Note: The maximum resolution of your video source and video destination are ultimately determined by the technical specifications of the devices. The connector type is not a definitive indicator of the maximum resolution.
DVI-A carries only analog (for example, VGA) with no digital component. DVI-D carries only digital video (for example, HDMI) with no analog component. DVI-I combines DVI-A and DVI-D connections to include both analog and digital components. A DVI-I port may be on either your video source or display, but whether or not a display carries either or both analog and digital sources depends on the technical specifications of your device.
No, you cannot use this docking station to charge a connected laptop computer.
To see a list of laptop docking stations that can charge a connected laptop, refer to the following FAQ: https://www.startech.com/faq/laptop-docking-stations-will-charge-laptop.