Productcode: USB3SDOCKDD
Dit dual-monitor USB 3.0 docking station verandert uw laptop in een dual-monitor werkstation met flexibele installatieopties.
Het dual-DVI dock voegt dual-monitor ondersteuning toe aan uw werkstation, met resoluties tot 2048x1152. Met meer schermen kunt u tegelijkertijd meerdere applicaties openen en op één scherm referentiemateriaal bekijken, terwijl u op het andere scherm een bestand maakt. Om te garanderen dat het USB 3.0 dock diverse schermen ondersteunt, worden twee schermadapters (DVI naar VGA en DVI naar HDMI) meegeleverd.
Verander uw laptop in een werkstation dat al uw randapparaten ondersteunt. Dit docking station heeft vijf USB 3.0 (USB 3.1 Gen 1) poorten. De twee USB poorten aan de voorkant zijn USB snellaadpoorten (USB Batterijoplaadspecificatie 1.2). Deze poorten laden uw mobiele apparaten sneller op dan standaard USB poorten, ongeacht of uw laptop al of niet op het dock is aangesloten. Het dock heeft ook een GbE poort, headset jack en aparte 3,5 mm audio- en microfoonpoorten, zodat u beschikt over alle benodigde verbindingen.
U kunt waardevolle bureauruimte vrijmaken door het dock verticaal op uw bureaublad te plaatsen in de meegeleverde (optionele) standaard.
De USB3SDOCKDD wordt gedekt door een 3-jarige garantie en gratis levenslange technische ondersteuning van StarTech.com.
Warranty Information | Warranty | 3 Years |
---|---|---|
Connector(en) | 1 - Type connector(en) | DVI-D (25-polig) |
DVI-I (29-polig) | ||
2 - Type connector(en) | USB 3.0 A (snelladen; 9-polig) | |
3 - Type connector(en) | USB Type-A (9-polig) USB 3.0 (5 Gbps) | |
1 - Type connector(en) | RJ-45 | |
3,5 mm mini-jack (4 standen) | ||
USB Type-B (9-polig) USB 3.0 | ||
Fysieke eigenschappen | Gewicht product | 285 g [10,1 oz] |
Kleur | Zwart & Zilver | |
Type behuizing | Aluminium en kunststof | |
Kabellengte | 100 cm [39,4 in] | |
Lengte product | 83 mm [3,3 in] | |
Breedte product | 23 mm [0,9 in] | |
Hoogte product | 17,8 cm [7,0 in] | |
Gebruiksomgeving | Bedrijfstemperatuur | 0°C to 50°C (32°F to 122°F) |
Opslagtemperatuur | -20°C to 60°C (-4°F to 140°F) | |
Vochtigheid | 5% - 85% rel. luchtvochtigheid | |
Hardware | 4K ondersteuning | Nee |
Snellaadpoort(en) | Ja | |
Ondersteunde schermen | 2 | |
Bus type | USB 3.0 | |
Industriestandaarden | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab USB batterijoplaadspecificatie Rev. 1.2 USB 3.0 - hubpoorten ondersteunen USB 2.0/1.1 neerwaartse compatibiliteit |
|
Chipsetcode | DisplayLink - DL-3900 Genesys Logic - GL3520VIA/VLI - VL817 |
|
Indicatoren | 1 - LED-indicatoren | Power |
Prestaties | Maximale overdrachtsnelheid | 5 Gbps (USB 3.0) 2 Gbps (Ethernet; full-duplex) |
Maximale analoge resoluties | 2048x1152 (VGA) | |
Maximale digitale resoluties | 2048x1152 (Dual-Link DVI/HDMI) | |
Type en snelheid | USB 3.0 - 5 Gbit/s | |
UASP ondersteuning | Ja | |
Compatibele netwerken | 10/100/1000 Mbps | |
Auto MDIX | Ja | |
Full duplex ondersteuning | Ja | |
Software | Besturingssystemen | Windows® XP SP3 (32-bits), Vista, 7, 8, 8.1, 10 macOS 10.6 - 10.12, 10.14 - 10.15, 11.0 Chrome OS™ v55+ |
Speciale opmerkingen / vereisten | Systeem- en kabelvereisten | USB 3.0 poortinterface en USB 3.0 kabel om het laptop docking station op een hostcomputer aan te sluiten (USB 3.0 hostkabel meegeleverd) |
Notitie | Inclusief HDMI- en VGA-adapters VGA-adapter kan alleen worden gebruikt voor de (29-polige) DVI-I-poort De DVI-I connector ondersteunt DVI-I signalering (digitaal en analoog) |
|
Dit USB docking station is niet bedoeld voor grafisch intensieve toepassingen, zoals gaming | ||
Verpakkingsinformatie | Package Height | 95 mm [3,7 in] |
Package Length | 18,6 cm [7,3 in] | |
Verzendgewicht (verpakt) | 1,0 kg [2,2 lb] | |
Package Width | 25,5 cm [10,0 in] | |
Voeding | Inclusief voedingsadapter | Inclusief wisselstroomadapter |
Ingangsspanning | 100 - 240 AC | |
Ingangsstroom | 0.8 A | |
Uitgangsspanning | 12V DC | |
Uitgangsstroom | 2 A | |
Polariteit pin midden | Positief | |
Stekkertype | H | |
Vermogensopname | 24W | |
Wat wordt er meegeleverd | 1 - Meegeleverd | USB 3.0 laptop docking station |
1 m USB 3.0-kabel | ||
4 - Meegeleverd | rubberen voetjes | |
1 - Meegeleverd | standaard | |
2 - Meegeleverd | Standaardschroeven | |
1 - Meegeleverd | Schroevendraaier | |
DVI naar VGA adapter | ||
DVI-naar-HDMI-adapter | ||
universele voedingsadapter (NA/JP, EU, VK, ANZ) | ||
Driver-CD | ||
handleiding |
Maak Ultra HD-verbindingen tussen uw High Speed HDMI®-apparaten
Connect your VGA monitor with the highest quality connection available
Connect your VGA monitor with the highest quality connection available
Verander een 2,5 inch SATA HDD/SSD in een volledige externe opslagoplossing via USB 3.0 met UASP
Verander een 2,5 inch SATA SSD/HDD (maximaal 12,5 mm) in een UASP-ondersteunde USB 3.0 externe drive
Maak een externe dubbele 3,5 inch HDD SATA RAID array, aangesloten via USB 3.0 met UASP of eSATA
Sluit uw USB Type-C laptop aan op een ouder USB randapparaat, met deze duurzame adapter
Bespaar ruimte en monteer uw docking station, thin client of USB hub netjes aan een VESA-conforme houder, achter uw scherm of onder uw bureau
Dual-Monitor houder | staal & aluminium | standaard voor schermen tot 24"
Verhoog uw productiviteit en maak ruimte vrij door twee beeldschermen, gestapeld, aan deze bureau standaard te bevestigen
Monitorbeugel | bureau/doorvoorgat bevestiging | hoogte verstelbaar | voor 12” tot 24” monitoren
Monitor arm | In hoogte verstelbaar | Horizontale of verticale configuratie | Gereedschapsloze installatie
Monitorbeugel | bureau/doorvoorgat montage | hoogteverstelbaar | voor schermen tot 27”
Verhoog uw productiviteit door twee schermen tot 32" te monteren, met volledige beweegbaarheid
Wij staan altijd klaar om al uw vragen te beantwoorden.
Chat Live (opens in new window)Wij staan altijd klaar om al uw vragen te beantwoorden.
Chat Live (opens in new window)Note: Do not physically connect the USB laptop docking station to your computer until you are instructed to (Step 6).
Note: Installation may take several seconds to complete. During the installation your display might flicker. This is normal. Once the installation is complete you will see your Windows desktop extended to the additional monitor(s).
Note: Do not physically connect the USB laptop docking station to your computer until instructed to (Step 6).
Note: Installation may take several seconds to complete. During the installation your display may flicker. This is normal. Once the installation has completed you will see your Windows desktop extended to the additional monitor.
Note: Do not physically connect the laptop docking station to your computer until instructed to (Step 7).
Note: Mac OS X will typically save the files to the Downloads folder that is associated with your user account (for example, hard_drive_name\Users\your_name\Downloads).
Note: Installation might take several seconds to complete. During the installation your display might flicker; this is normal. Once the installation has completed you will see your Macintosh desktop extended to any connected monitors.
To install your USB laptop docking station in Ubuntu 15.0 (kernel 3.16), you need to download the Dynamic Kernel Module Support (DKMS) package and the adapter driver.
To install the DKMS package, complete the following:
When the DKMS package is installed, complete the following:
Note: Ubuntu typically saves the files to the Downloads folder that is associated with your user account (for example, ~/Downloads).
Note: It can take several minutes to complete the installation. During this time, your display might flicker, but this is normal behavior. When the installation is complete, your Ubuntu desktop is extended to the additional monitor.
Als het beeldscherm dat via uw USB-beeldschermadapter is aangesloten niet wordt ingeschakeld nadat het langere tijd in de slaapstand heeft gestaan, heeft Windows waarschijnlijk automatisch de USB root hub uitgeschakeld om energie te besparen.
De onderstaande stappen beschrijven hoe u de USB root hub zodanig configureert dat het beeldscherm ingeschakeld blijft als het in de slaapstand staat, zodat dit probleem niet meer voorkomt.
Windows 8 / 10
NB: U moet wellicht uw USB-beeldschermadapter loskoppelen en weer aansluiten nadat u deze instellingen hebt toegepast om weer verbinding te maken.
Windows 7 / Vista
NB: U moet wellicht uw USB-beeldschermadapter loskoppelen en weer aansluiten nadat u deze instellingen hebt toegepast om weer verbinding te maken.
Windows XP
NB: U moet wellicht uw USB-beeldschermadapter loskoppelen en weer aansluiten nadat u deze instellingen hebt toegepast om weer verbinding te maken.
Sometimes an on-board network interface card (NIC) conflicts with a new NIC. In these cases it is best to disable the on-board NIC.
The best way to disable your on-board NIC is to go into your BIOS and disable it there if possible. To do this, consult your motherboard manual.
You can also disable any NIC in Windows. Here is how you do this:
First click Start, or, in Windows 10 and 8, hold down the Windows key and press X. Then click Control Panel.
Windows 10
Windows 8
Windows 7
Windows Vista
Windows XP
When you troubleshoot issues with a laptop docking station, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Video cables
Video source
Video destination
Laptop docking station
USB peripherals
Ethernet connection
To test your setup components, try the following:
Use the video cables, video source, video destination, laptop docking station, USB peripherals, and Ethernet connection in another setup to see if the problem is with the components or the setup.
Use a different video cable, video source, video destination, laptop docking station, USB peripherals, and Ethernet connection setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cables, it is recommended that you do the following:
Test each cable individually.
Use short cables when you are testing.
When you test the video cables, video source, video destination, and laptop docking station it is recommended that you do the following:
Press the Windows key + R, type devmgmt.msc, and press Enter to open Device Manager.
If you do not see the USB video adapter in Device Manager, refer to the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=expansion-cards#usb-cannot-detect-windows.
If the device is listed with an error, reinstall the drivers following the instructions on the website.
Check to see if your video card drivers are current. You can check what video card you have in Device Manager under Display adapters. It is recommended that you go directly to the video card manufacturer's website to check for the latest drivers.
Check to see if the monitor is being detected by Windows.
For more information about testing the USB peripherals and the laptop docking station, visit www.startech.com/faq/usb_hubs_general_troubleshooting.
When you test Ethernet and the laptop docking station, refer to the following FAQ: http://www.startech.com/faq/network_adapters_general_troubleshooting.
When you test sound and the laptop docking station, refer to the following FAQ: http://www.startech.com/faq/sound_cards_general_troubleshooting.
If hardware acceleration is enabled on any of your software applications, it can result in poor resource management and limit the performance of your video device. If you experience this problem, you should disable hardware acceleration in the program(s) that were impacted.
To disable hardware acceleration in common applications and operating systems, complete one of the following series of steps, depending on what software application(s) or operating system that you are running.
Internet Explorer 9 and later
Note: Earlier versions of Internet Explorer do not use hardware acceleration.
Mozilla Firefox
Google Chrome
Microsoft Office 2013 / 2010
Windows 10 / 8
Windows 7 / Vista
Windows XP
To confirm that Windows detects your USB device, complete the following:
Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.
To confirm that the Mac OS detects your USB device, complete the following:
You may need to refresh the System Information page after you plug in your device. To do so, press Command + R with the System Information page open.
Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.
Digital Visual Interface (DVI) is a video display interface that can contain different types of signaling, based on the application. DVI cables and ports are created using different connector types to identify what application they are intended to be used in. The connector types are identified by the number of pins on the DVI connector. DVI comes in the following five different connector types:
Single and Dual link DVI indicate the maximum resolution capabilities of the video source or video destination. The maximum resolutions are Single Link (1920 x 1080 @ 60Hz) and Dual Link (2560 x 1600 @ 60Hz).
Note: The maximum resolution of your video source and video destination are ultimately determined by the technical specifications of the devices. The connector type is not a definitive indicator of the maximum resolution.
DVI-A carries only analog (for example, VGA) with no digital component. DVI-D carries only digital video (for example, HDMI) with no analog component. DVI-I combines DVI-A and DVI-D connections to include both analog and digital components. A DVI-I port may be on either your video source or display, but whether or not a display carries either or both analog and digital sources depends on the technical specifications of your device.
Whether this device works with the Chrome OS™ operating system or not depends on the version of the Chrome OS operating system that you’re running and the model of the Chromebook™ notebook computer that you’re using.
Existing DisplayLink® enabled USB 3.0 products natively support Chrome OS build version R55 and later, but not all Chromebook notebook computers running build version R55 and later natively support DisplayLink. Support for DisplayLink is being rolled out to Chromebook notebook computers in a series of releases. To see the build version of the Chrome OS operating system that supports DisplayLink and corresponds to the model of the Chromebook notebook that you’re using, view the following knowledge base article on the DisplayLink website: http://support.displaylink.com/knowledgebase/articles/891030.
No, you cannot use this docking station to charge a connected laptop computer.
To see a list of laptop docking stations that can charge a connected laptop, refer to the following FAQ: https://www.startech.com/faq/laptop-docking-stations-will-charge-laptop.