Productcode: SVUSB2N1_10
De SVUSB2N1_10 3 m 2-in-1 USB + VGA KVM switch kabel is gemaakt van hoogwaardige materialen en is ontworpen door experts voor gegarandeerd kristalheldere beeldkwaliteit en betrouwbare verbindingen.
Onze universele USB KVM switch kabels raken niet verstrikt en houden uw werkomgeving netjes, terwijl ze uitstekende prestaties leveren in combinatie met uw StarTech.com of andere KVM switch.
Werkt met:
Compatibele StarTech.com KVM's zijn te vinden in het gedeelte Accessoires.
Aten-modellen (CS102U, CS104U)
Belkin-modellen (F1DN102U, F1DN104U, F1DN108U)
TrippLite-modellen (B006-004-R)
Cables to go-modellen (35555, 35566, 35554, 52064)
IOGear-modellen (GCS102U, GCS104U)
Gedekt door de levenslange garantie van StarTech.com.
Warranty Information | Warranty | Lifetime |
---|---|---|
Connector(en) | 1 - Connector A | VGA (15-polig, D-Sub met hoge dichtheid) |
USB Type-A (4-polig) USB 2.0 | ||
1 - Connector B | USB B (4-polig) | |
VGA (15-polig, D-Sub met hoge dichtheid) | ||
Fysieke eigenschappen | Gewicht product | 440,0 g [15,5 oz] |
Hoogte product | 0,0 mm [0,0 in] | |
Breedte product | 0,0 mm [0,0 in] | |
Kleur | Zwart | |
Kabellengte | 3,0 m [10,0 ft] | |
Lengte product | 3,0 m [10,0 ft] | |
Verpakkingsinformatie | Package Height | 26,0 mm [1,0 in] |
Package Length | 40,0 cm [15,7 in] | |
Verzendgewicht (verpakt) | 449,0 g [15,8 oz] | |
Package Width | 14,0 cm [5,5 in] | |
Wat wordt er meegeleverd | 1 - Meegeleverd | 3 m USB+VGA 2-in-1 KVM-switchkabel |
Bedien 2 USB-computers met VGA-video met behulp van deze complete KVM-set incl.bekabeling
Bedien tot 4 pc of Mac®-computers vanaf een enkel toetsenbord, muis en monitor en gebruik een USB-apparaat op alle aangesloten computers
Wij staan altijd klaar om al uw vragen te beantwoorden.
Chat Live (opens in new window)Wij staan altijd klaar om al uw vragen te beantwoorden.
Chat Live (opens in new window)It can be difficult to tell which ones are right for the KVM switch you are interested in. How can you tell which KVM cables you require? How can you tell if a KVM switch requires proprietary cables? How do these cables work?
Standard KVM Switches and Cables
Note: You will need one bundle of KVM cables per computer you want to connect to the KVM switch.
Standard KVM switches have no special cable requirements. If you have spare video and PS/2 or USB cables, you can use them to hook up the KVM switch to your computers. StarTech.com still sells KVM cable packages, but they are just for the convenience of buying them in bundles and usually involve some savings. Keep in mind that even if you have some of the cables you need, it still might be advantageous to buy the bundle.
KVM Switches with Opposite Gender Video Connections
Some KVM switches use male video connections for the computers and female video connections for the console ports. In this case you simply need a video extension cable, or a KVM cable package appropriate to the KVM switch. This is so you cannot accidentally plug cables from your computer into the console ports.
KVM Switches Requiring Proprietary Cables
KVM switches can also use proprietary KVM cables to connect to the individual computers. This is often done with larger KVM switches and KVM switches intended for a server environment. These cables use a proprietary pinout which does not conform to the video standard in use, as the cable carries both the video and PS/2 or USB data along a single cable.
If you are unsure whether or not you need special cables, complete the following:
Note: If there are no PS/2 or USB ports on the back of the KVM switch other than for the console, you will require proprietary cables.
If at this point you require further assistance in deciding which cables to purchase with your StarTech.com KVM switch, contact our technical support team.