Are you in the United States?
Visit our U.S.A. & International site for relevant pricing, distribution and product availability information.
Go to StarTech.comUSB VGA KVM Console Extender over CAT5 UTP (500 ft)
Operate a USB & VGA KVM or PC over 500ft as if it were right in front of you
Product ID: SV565UTPUEU
- Can be used with a single computer or connected to an existing KVM switch
- Easy installation using industry standard UTP network cable
- Cables Included for a ready out of the box setup
- Intuitive hot-key commands
- Supports auto-switching between host and remote users or dedicated control
- USB computers are supported at the host and remote locations (USB keyboard and mouse required for remote console)
- Supports most combo keyboard and mouse sets (including Wireless)
Not Available
May be in stock with partners
From a Partner
Support
Overview
The SV565UTPUEU USB VGA KVM Console Extender over CAT5 UTP (500 ft) lets you control a server, computer or multiple computers (connected through KVM Switch) over a standard Cat5 or Cat6 UTP network cable connection, at distances of up to 500 ft (150 m) away. PC connection cables are included with this product for a ready out of the box solution.
You can use your existing keyboard, mouse, and monitor to access both the server room and your office computer, saving space and avoiding the need for a dedicated remote console by allowing you to switch between workstation view and KVM view at the remote location.
Backed by a StarTech.com 2-year warranty and free lifetime technical support.
The StarTech.com Advantage
- Low cost way to convert existing standard KVM units into remotely accessible hardware extending your hardware’s capabilities
- Maintain network security with long distance local access without being exposed over IP
- Broad support for newer USB keyboards, mice, and even most combo/wireless configurations
Applications
Monitor computer-controlled equipment in a factory or warehouse
Use one or more servers in a server room from a remote location
Control remote machines and security monitoring systems
Technical Specifications
Product Numbers | ||
---|---|---|
Ingram Micro Netherlands | 1614857 | |
Tech Data - Netherlands | 4428532 | |
UPC Code | 065030834506 |
Warranty Information | ||
---|---|---|
Warranty | 2 Years | |
Hardware | ||
Audio | No | |
KVM Ports | 2 | |
Number of Monitors Supported | 1 | |
PC Interface | USB | |
PC Video Type | VGA | |
Rack-Mountable | No | |
Performance | ||
IP Control | No | |
Max Transfer Distance | 150 m (492 ft) | |
Supported Resolutions | 1280 x 1024 @ 300ft/ 100m 1024 x 768 @ maximum cable length |
|
Connector(s) | ||
Console Interface(s) | 2 - VGA (15 pin, High Density D-Sub) Female | |
4 - USB Type-A (4 pin) USB 2.0 Female | ||
Host Connectors | 2 - VGA (15 pin, High Density D-Sub) Female | |
Other Interface(s) | 2 - RJ-45 Female | |
Software | ||
OS Compatibility | OS independent; No software or drivers required | |
Special Notes / Requirements | ||
Note | Product weights/measurements indicate a single unit only (either Host or Remote) | |
Power | ||
Center Tip Polarity | Positive | |
Input Current | 0.2A | |
Input Voltage | 110V-240V AC | |
Output Current | 0.6A | |
Output Voltage | 9 DC | |
Plug Type | M | |
Power Consumption (In Watts) | 5.4 | |
Power Source | AC Adapter Included | |
Environmental | ||
Humidity | 0~80% RH | |
Operating Temperature | 0°C to 40°C (32°F to 104°F) | |
Storage Temperature | -20°C to 60°C (-4°F to 140°F) | |
Physical Characteristics | ||
Color | Black | |
Enclosure Type | Steel | |
Product Height | 20 mm [0.8 in] | |
Product Length | 75 mm [3 in] | |
Product Weight | 299 g [10.6 oz] | |
Product Width | 155 mm [6.1 in] | |
Packaging Information | ||
Shipping (Package) Weight | 1.7 kg [3.8 lb] | |
What's in the Box | ||
Included in Package | 1 - Host Unit | |
1 - Remote Unit | ||
2 - 6 ft 2-in-1 USB VGA KVM cables | ||
2 - Packs Rubber Feet | ||
1 - Power Adapter | ||
1 - Manual |
Accessories
10 ft Ultra Thin USB VGA 2-in-1 KVM Cable
Connect VGA video and USB using a single thin KVM cable
15 ft 2-in-1 Ultra Thin USB KVM Cable
Connect VGA video and USB using a single thin KVM cable
6 ft 2-in-1 Ultra Thin USB KVM Cable
Connect VGA video and USB using a single thin KVM cable
Product Support
Drivers & Downloads
Manual(s):
-
SV565UTPUEU.pdf
English
Compliance Letter(s):
Data Sheet(s)
- SV565UTPUEU_Datasheet.pdf
English
Frequently Asked Questions
Before You Buy
This device outputs a VGA signal. If you have a display or video destination that uses another type of video connection, there are ways that you can convert the video signal or connection. These options are outlined below and organized by the target connection.
Target connection | First conversion | Second conversion (if required) |
DVI-D | VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI. | HDMI to DVI-D: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI. |
DVI-I | VGA to DVI-I: https://www.startech.com/Cables/Audio-Video/Video-Adapter/DVIVGA/. | N/A |
HDMI |
VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI. |
N/A |
DisplayPort | VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI. | HDMI to DisplayPort: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=DisplayPort. |
Note: You might need to use more than one converter as part of your solution; however, you should try to use the least number of converters and cables to connect your source and destination. If you have the option to convert to multiple target video connections, choose the option that requires the fewest number of conversions.
DVI-I and DVI-D
When you convert from VGA to DVI, you need to know if you are converting to a DVI-I or a DVI-D connection. For more information about how to identify the type of connection that you need, refer to the following FAQ: https://www.startech.com/faq/video_signal_converters_dvi_interface.
You also need to know which form of DVI that you are using, because DVI-I supports both analog (VGA) and digital (HDMI) signals, while DVI-D only supports digital (HDMI) signals.
Note: Certain devices may have a DVI-I connection but only support DVI-D signaling. It is important to verify that your DVI-I device supports DVI-I signaling.
Copy Link
Was this information helpful? Yes No
This device has a VGA input port. If you have a video source that uses another video connection, there are options available to convert the video signal or connection. These options will be outlined below for each video source connection.
Source connection |
Conversion |
DVI-I |
DVI-I to VGA: https://www.startech.com/DVIVGAMFBK. |
DVI-D |
DVI-D to VGA: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=DVI-D&filter_AVOUTPUT=VGA. |
HDMI |
HDMI to VGA: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=VGA. |
DisplayPort |
DisplayPort to VGA: https://www.startech.com/AV/Displayport-Converters/DP-VGA/. |
DVI-I and DVI-D
When you convert from DVI to VGA, you need to know if you are converting from a DVI-I or a DVI-D connection. For more information about how to identify the type of connection that you have, refer to the following FAQ: https://www.startech.com/faq/video_signal_converters_dvi_interface.
You also need to know which form of DVI that you are using, because DVI-I supports both analog (VGA) and digital (HDMI) signals, while DVI-D only supports digital (HDMI) signals. Some DVI-I connections only support DVI-D signaling. In this case, you must use a DVI-D to VGA converter.
Copy Link
Was this information helpful? Yes No
* Product appearance and specifications are subject to change without notice.
Follow us on Twitter | Find us on Google+