StarTech.com

1-poort PCI Express IDE Controllerkaart

Voeg een 2-kanaals IDE-poort toe aan een computer via een PCI Express-slot

Productcode: PEX2IDE

  • 2-kanaals IDE-poort ondersteunt twee schijven
  • Ondersteuning voor 48-bit LBA
  • Ondersteunt ATA/ATAPI-commando's
Bekijk meer
  • Ondersteunt UDMA-6 voor overdrachtsnelheden tot 133 MB/s
  • Inclusief low profile montagebracket
€ 28,99 EUR exc BTW
€ 35,08 EUR inc BTW
Niet beschikbaar
Eventueel op voorraad bij partners
Waar te verkrijgen

Bezoek vandaag nog onze Europese online winkel voor meer producten zoals deze!

Overzicht

Deze PCI Express IDE Controllerkaart biedt een voordelige manier om oudere schijven te gebruiken met moderne computers door een PCI Express-poort om te zetten in een IDE-poort. De IDE-controllerkaart werkt met overdrachtsnelheden tot 133 MB/s en ondersteunt PIO 0/1/2/3/4 en UDMA 33/66/100/133. Met de kaart kunt u op efficiënte wijze een IDE-kanaal toevoegen met ondersteuning voor twee IDE-schijven op hetzelfde kanaal. De PCI Express IDE-controllerkaart met tweevoudig profiel wordt geleverd met zowel een standaard als een low profile / half-height bracket voor aanpassing aan systemen met kleine vormfactor.

StarTech.com Voordeel

  • 2 kanalen ondersteunen twee IDE-schijven tegelijk met ondersteuning voor UDMA-6 gegevensoverdracht
  • Ondersteuning voor 48-bit LBA voor compatibiliteit met hoge-capaciteit harde schijven van meer dan 137 GB
  • Met levenslange garantie en gratis technische ondersteuning door StarTech.com

Toepassingen

Voeg een IDE-poort toe aan een computersysteem

Vervang een defecte IDE-poort

Voeg een IDE-poort toe voor het aansluiten van oudere ATA-apparaten, zoals harde schijven en tapedrives

Technische specificaties

Garantie
Garantie Lifetime
Hardware
Bus type PCI Express
Chipsetcode JMicron - JMB368
Interface IDE
Kaarttype Standaard bracket (incl. low profile bracket)
Poorten 1
Prestaties
LBA-ondersteuning 48-bit
Connector(en)
Interne poorten 1 - IDE (40-polig, EIDE/PATA) Mannelijk
Type connector(en) 1 - PCI Express x1 Mannelijk
Software
Besturingssystemen Windows® 2000, XP, Vista, 7, 8, 8.1, 10
Windows Server® 2008 R2, 2012, 2016
Speciale opmerkingen / vereisten
Systeem- en kabelvereisten Vrije PCI Express-uitbreidingsslot
Fysieke eigenschappen
Gewicht product 120 g [4.2 oz]
Verpakkingsinformatie
Verzendgewicht (verpakt) 0.2 kg [0.4 lb]
Wat wordt er meegeleverd
Meegeleverd 1 - PCI Express IDE Controllerkaart
1 - IDE-kabel
1 - Low-profile bracket
1 - Handleiding

Compatibiliteit

Bekijk volledige OS compatibiliteit
Windows® 2000, XP, Vista, 7, 8, 8.1, 10
Windows Server® 2008 R2, 2012, 2016

Certificaties

Productondersteuning

Veelgestelde vragen (FAQ)

Voor uw aanschaf

Note: For more information on how to detect an IDE hard drive, visit http://www.startech.com/faq/hard_drive_accessories_ide_detection.

Older IDE drives are not supported by current StarTech.com products. Typically, these drives were made earlier than the mid-to-late 1990s and are smaller than 1 Gigabyte in size.

There are a number of reasons that older IDE drives may not be detected, including the following:

  • The drive uses PIO (Programmed Input/Output) mode and not DMA (Direct Memory Access).

  • The drive is non-ATA or is using an ATA mode that predates the chipset's compatibility (usually older than ATA-4).

  • The sector size is not 512 bytes.

Unfortunately there is no workaround in these situations. An older system or an older IDE controller card must be used to access older IDE drives.

This device supports the ATA Packet Interface (ATAPI) protocol. ATAPI is required for optical drives, including CD-ROM drives, DVD-ROM drives, and Blu-ray players. Because this device supports ATAPI, optical drives are also supported.

 

Hoe gaat u te werk

To confirm that Windows detects your expansion card, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

No, this hard drive controller card does not support starting an operating system from a connected hard drive.

For a list of hard drive controller cards that support this feature and instructions on how to configure them, refer to the following FAQ: https://www.startech.com/faq/hard_drive_controllers_os_install_on_controller.

Troubleshooting

Note: If you are using an IDE hard drive 1 Gigabyte in size or smaller, refer to the following FAQ: http://www.startech.com/faq/hard_drive_accessories_minimum_ide_hard_drive_size

If you are unable to detect your IDE (PATA) drive using a StarTech.com product, you may need to change the jumper settings on your drive. The jumpers switch the drive between Master, Slave, and Cable Select for most drives. A jumper is a small plastic piece that slides on top of two pins to electrically short them together.

When it does not mention what IDE drive configuration is required or if there is only one drive in the setup, the drive should be configured as Master. If Master is not working, try using the drive in Cable Select.

There is no standard position for the jumpers on IDE drives. On some drives, the jumper diagram is on the label that is on the top of the drive. On other drives, there are markings on the circuit board for CS, MA, and SL, which means a jumper shorts the pins vertically in that position. For more information, refer to the documentation provided by the manufacturer.

When you troubleshoot issues with a hard drive controller card, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • IDE, SATA, and eSATA cables

  • Hard drives

  • Hard drive controller card

To test your setup components, try the following:

  • Use the IDE, SATA, or eSATA cable, hard drive, and hard drive controller card in another setup to see if the problem is with the components or the setup.

  • Use a different IDE, SATA, or eSATA cable, hard drive, and hard drive controller card in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the hard drive and hard drive controller card, it is recommended that you do the following:

  1. To open the Device Manager, press the Windows key + R, type devmgmt.msc, and press Enter. Check the IDE ATA/ATAPI controllers (for IDE) section, or the Storage controllers (for SATA) section.

  2. Do one of the following:

Note: Formatting a hard drive erases all of the data on it. Make sure that you back up all of your data before you reformat the hard drive.

  1. To check Disk Management, press the Windows key + R, type diskmgmt.msc, and press Enter. Check to see if your hard drive is listed.

  2. If the hard drive is listed as healthy but does not have a drive letter, for example, C:, right-click healthy and click Change Drive Letter and Paths. Click Add, assign a drive letter, and click OK.

Note: A formatted hard drive does not show up in Computer or My Computer until it has a drive letter assigned to it.