Product ID: PYO2SATA
In stock: 1065
The PYO2SATA SATA power splitter cable features a SATA male power connector that connects to a single computer power supply SATA connector, and breaks out into two SATA female power connectors.
The SATA power splitter/Y-cable overcomes the limit of the number of SATA drives that can be installed in the system based on available PSU power connections, and eliminates the cost of having to upgrade the power supply to accomodate an additional SATA drive.
|Connector(s)||1 - Connector A||SATA Power (15 pin)|
|2 - Connector B||SATA Power (15 pin)|
|Environmental||Operating Temperature||20°C to 80°C (68°F to 176°F)|
|Storage Temperature||24°C to 25°C (75.2°F to 77°F)|
|Hardware||Cable Jacket Material||PVC - Polyvinyl Chloride|
|Packaging Information||Package Height||0.6 mm [0.0 in]|
|Package Length||12.8 cm [5.0 in]|
|Shipping (Package) Weight||32.0 g [1.1 oz]|
|Package Width||22.0 cm [8.6 in]|
|Physical Characteristics||Product Height||0.0 mm [0.0 in]|
|Weight of Product||28.0 g [1.0 oz]|
|Product Width||0.0 mm [0.0 in]|
|Cable Length||152.4 mm [6.0 in]|
|Product Length||160.0 mm [6.3 in]|
|What's in the Box||1 - Included in Package||6in SATA Power Y Splitter Cable Adapter - M/F|
Extend SATA Power Connections by up to 8in
In stock: 322
Extend a SATA Power Connection by up to 12in
In stock: 556
When you troubleshoot issues with an internal power cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
To test your setup components, try the following:
Use the power supply, computer part, and power cable in another setup to see if the problem is with the components or the setup.
Use a different power supply, computer part, and power cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cable, it is recommended that you do the following:
Make sure that the cable is firmly inserted into both ends.
The polarity (usually indicated by the color of the cables) matches.
No pins are bent or missing on the power supply cable or header, or the computer part.