Product ID: PCI2S950
The PCI2S950 2 Port PCI RS232 Serial Adapter Card with 16950 UART offers two high performance 16C950 serial UART channels/ports using a single PCI slot. Perfect for connecting new or legacy serial peripherals to your system, with data transfer rates of up to 460.8 Kbps.
The PCI-based RS232 Serial card is a cost-effective solution for connecting serial modems, POS devices, PDAs, digital cameras, printers, ISDN terminal adapters and more, without having to upgrade peripherals for USB compatibility.
Installation is a breeze with support for a broad range of Windows® operating systems. Plus, IRQ sharing and a PCI plug and play interface guarantee convenient, hassle-free connections.
Backed by a StarTech.com lifetime warranty and free lifetime technical support.
Warranty Information | Warranty | Lifetime |
---|---|---|
Connector(s) | 1 - Connector Type(s) | PCI (5V, 32-bit) |
2 - External Ports | DB-9 (9 pin, D-Sub) | |
Environmental | Operating Temperature | -10°C to 80°C (14°F to 176°F) |
Storage Temperature | -20°C to 100°C (-4°F to 212°F) | |
Humidity | 5~85% RH | |
Hardware | Ports | 2 |
Interface | Serial | |
Bus Type | PCI (5 Volt) | |
Card Type | Standard Profile | |
Port Style | Integrated on Card | |
Industry Standards | Power Management 1.1 | |
PCI 2.2 | ||
Chipset ID | PLX/Oxford - OX16PCI952 | |
Packaging Information | Package Length | 21.2 cm [8.3 in] |
Package Width | 40 mm [1.6 in] | |
Package Height | 14.4 cm [5.7 in] | |
Shipping (Package) Weight | 160 g [5.6 oz] | |
Performance | Maximum Data Transfer Rate | 460.8Kbps |
Serial Protocol | RS-232 | |
Data Bits | 5, 6, 7, 8, 9 | |
FIFO | 128 Bytes | |
MTBF | 14,744,913 Hours | |
Physical Characteristics | Product Length | 12 cm [4.7 in] |
Product Width | 20 mm [0.8 in] | |
Product Height | 12 cm [4.7 in] | |
Weight of Product | 60 g [2.1 oz] | |
Software | OS Compatibility | Windows® 95, 98SE, ME, 2000, XP, Vista, 7, 8, 8.1, 10 Windows Server® 2003, 2008 R2, 2012 Linux 2.6.x to 4.4.x LTS Version only |
What's in the Box | 1 - Included in Package | 2 Port PCI Serial Card |
Driver CD | ||
Instruction Sheet |
In stock: 194
In stock: 201
We are always ready to assist you with any questions you may have.
Live Chat (opens in new window)We are always ready to assist you with any questions you may have.
Live Chat (opens in new window)Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).
Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).
Note: The Select your device’s type from the list below screen does not appear on all systems. If you do not see this screen, skip this step.
Note: To view your system type, click Start. Right-click Computer, and then click Properties.
Note: If you are using a serial card that uses the OxPCIeMf file and installation fails, repeat steps 4 to 9, then browse to the Windows folder. Browse to the Serial Port Driver folder and click the oxserleg file. Click OK, and then click Next.
Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).
Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Documents and Settings\your_name\My Documents\Downloads).
Note: The Hardware Type screen does not appear on all systems. If you do not see this screen, skip this step.
Note: To view your system type, click Start. Right-click Computer, and then click Properties.
Note: If you are using a serial card that uses the OxPCIeMf file and installation fails, repeat steps 4 to 10, then browse to the Windows folder. Browse to the Serial Port Driver folder and click the oxserleg file. Click OK, and then click Next.
When you troubleshoot issues with a serial device, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Serial cables
Serial ports
Serial devices
To test your setup components, try the following:
Use the serial cable, serial port, and serial device in another setup to see if the problem is with the components or the setup.
Use a different serial cable, serial port, and serial device in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cables, it is recommended that you do the following:
Test each cable individually.
Use short cables when you are testing.
When you test the serial ports and serial device, it is recommended that you do the following:
Press the Windows key + R, type devmgmt.msc, and press Enter to open Device Manager. Check to see if your device is listed under Ports (COM & LPT).
Make sure that the COM port number is the correct number for the serial device and that the software being used to connect the computer to the serial device uses the correct COM port number.
If the device is listed with an error, follow the instructions on the website to reinstall the drivers.
Note: Some serial devices work only if the COM port number is between a certain range. For example, COM1 to COM4.
Perform a serial loopback test. See this FAQ on how to perform a RS-232 serial loopback test: http://www.startech.com/faq/serial_loopback_test_rs232_windows
To check whether or not an RS-232 serial port is working, perform an RS-232 loopback test by doing the following:
Note: To open a telnet session on the COM port, you need a telnet client like PuTTY or Hyper Terminal. Windows XP comes with Hyper Terminal.
If the loopback test fails, make sure that the serial cable or gender changer that you are using works and that the adapter is in the correct port.
You can check multiple ports at the same time by opening multiple sessions, putting the loopback adapter on one port, and trying to type into each session. When you can see what you are typing, you know that the COM port is working and you can see which port number the physical serial port is. Close the window for the port that you just tested to speed up the testing of the remaining serial ports.
For products related to this article, click here.
To confirm that Windows detects your expansion card, complete the following:
Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.
It depends on your motherboard. This PCI card is keyed for 5V PCI and PCI-X slots. If your motherboard's PCI or PCI-X slots are keyed for 5V, this will work. If it is keyed for 3.3V, it will not. You can tell which your motherboard is keyed for by the location of the notch on the slot. To confirm whether this PCI card will fit into your PCI-X slot, refer to your motherboard's documentation.
Check out our review guidelines.