Support

Product FAQs

Before You Buy

What do I do if my display flickers when I use it with my laptop docking station?

If you set your display to [email protected] and connect a display to the DisplayPort output on the laptop docking station, your display may flicker. This issue only affects certain monitors and is a result of an interoperability issue between the hardware used in the display and the docking station. This issue is not specific to StarTech.com docking stations.

To resolve this issue, try any of the following:

  • Connect a USB-C to DisplayPort cable from the USB-C Thunderbolt 3 port on the docking station to the DisplayPort input on the display. (StarTech.com product ID for the USB-C to DisplayPort cable: CDP2DPMM1MB.)
  • Connect a USB-C to HDMI 2.0 cable from the USB-C Thunderbolt 3 port on the docking station to the HDMI input on the display. (StarTech.com product ID for the USB-C to HDMI 2.0 cable: CDP2HD4K60.)
  • If you are using a dual monitor setup, connect a dual DisplayPort adapter from the USB-C Thunderbolt 3 port on the docking station to the DisplayPort input on the displays. (StarTech.com product ID for the Thunderbolt 3 dual DisplayPort adapter: TB32DP2.)
  • Disable MST (Multi Stream Transport) or DisplayPort 1.2 mode on your display and enable [email protected] Refer to the information provided by the manufacturer for assistance. 
Was this information helpful?
Yes No
|
This FAQ applies to these products:
Feedback Back to top