10/100 VDSL2 Ethernet Extender Kit over Single Pair Wire – 1km

Extend your 10/100Mbps network by up to 1km over Ethernet or RJ11 phone lines

Product ID: 110VDSLEXTGB

0 stars (0 reviews) |
  • IEEE 802.1Q VLAN tag transparent
  • Selectable CPE and CO mode via DIP switch
  • Supports flow control for Fast Ethernet (pause frame or Back Pressure)
Your price
€509.99 EUR excl. VAT
€627.29 EUR incl. VAT
Where to buy StarTech.com products
Where to buy

The 110VDSLEXTGB VDSL Ethernet extender kit allows you to span a 10/100 network over extremely long distances (up to 1km) while still maintaining high-speed network connectivity. The device allows you to run the connection over standard RJ45 cabling, existing RJ11 phone lines, or any other set of single pair wires. The VDSL (VDSL2) kit is simple to install and provides an out-of-the-box solution as both the Ethernet-VDSL extender and receiver units are included.

A perfect solution for a broad range of applications including connecting isolated user stations within the same building or between separate buildings, or overcoming infrastructure obstacles and distances (e.g. older stone/concrete architecture) where new wiring or wireless may be impossible. The VDSL Ethernet LAN Extender kit helps to eliminate expense by allowing video streaming and data to share the same telephone pair without interference.

The 110VDSLEXT requires only a single pair of wires to function, while offering the ability to use multiple sets of the devices to create several simultaneous connections to your remote building. In these multiple set configurations, you have the ability to use up to 4 sets over a single Cat5e or Cat6 cable which can be used as separate LAN (or VLAN) connections, or bridged into a trunk line for additional speed/bandwidth over long distances (up to two sets only over standard Cat5).

Solution Diagrams:
Solution Diagrams

Backed by a StarTech.com 2-year warranty and free lifetime technical support.

Applications

  • Provide ethernet over copper connectivity to a user or network segment that is in an isolated area of a large complex or in another building altogether
  • Extend network connectivity to remote areas of stadiums, auditoriums or other venues
  • Industrial applications include controlling CNC machinery, polling bar code scanner data, administering process control equipment, and other harsh environment applications
  • Monitor and control medical equipment, security keypads/card scanners, point of sale equipment and remote sensor data, and various other healthcare related network communications
  • Remote sensor monitoring for traffic flow management (air traffic control, expressway flow)

The StarTech.com Advantage

  • Provides high speed Ethernet extension over copper telephone line or other existing two pair wiring enabling network connectivity to remote locations up to 1km away
  • Allows network connectivity in buildings made of stone/concrete, or heritage buildings where new Ethernet cabling or wireless are impossible
  • Simple Plug and play installation with no software or driver installation for a hassle-free setup

Partner Numbers

  • Ingram IE V930828
  • Exertis IE STC110VDSLEXTGB
  • CMS Distribution Ireland 110VDSLEXTGB
  • UPC 065030834513

Specifications

Warranty Information Warranty 2 Years
Connector(s) 2 - Local Unit Connectors RJ-45
2 - Remote Unit Connectors RJ-45
Environmental Operating Temperature 0°C to 50°C (32°F to 122°F)
Storage Temperature 0°C to 70°C (32°F to 158°F)
Humidity 10~90% RH
Hardware Industry Standards IEEE 802.3/802.3u/802.3x 10/100 Base-T Auto-Negotiation, Auto-MDI/MDI-X
On-board surge protection
VDSL2 ITU-T G.993.2, VDSL ITU-T G.993.1, and VDSL2/VDSL ITU-T G.997.1 compliant
Indicators 3 - LED Indicators VDSL: Power On/Off, CO/CPE, Idle/Trained/Link
LAN: ACT/LNK, 10/100 Mbps, Half/Full Duplex
Packaging Information Package Length 13.7 cm [5.4 in]
Package Width 14.8 cm [5.8 in]
Package Height 95 mm [3.7 in]
Shipping (Package) Weight 940 g [33.2 oz]
Performance Maximum Data Transfer Rate 0m - 100Mbit/s
300m - 75Mbit/s
1km - 10Mbit/s
Max Distance 1 km (0.6 mi)
Physical Characteristics Color Black
Product Length 95 mm [3.7 in]
Product Width 72 mm [2.8 in]
Product Height 22 mm [0.9 in]
Weight of Product 90 g [3.2 oz]
Power Power Source 2 AC Adapters Included
Input Voltage 230 AC
Output Voltage 12V DC
Output Current 1A
Center Tip Polarity Positive
Plug Type M
Power Consumption (In Watts) 12
Special Notes / Requirements Note You have the ability to use up to four sets over a single Cat5e or Cat6 cable which can be used as separate LAN (or VLAN) connections, or bridged into a trunk line for additional speed/bandwidth over long distances (Up to two sets only over standard Cat5).
What's in the Box 1 - Included in Package Extender
Receiver
2 - Included in Package RJ-45 to VDSL Cable
Power Adapter
1 - Included in Package Instruction Manual

Accessories

Discontinued
RJ12FT

12 ft RJ11 Telephone Modem Cable

Position your modem up to 12ft from your computer

Your price
€1.99 EUR excl. VAT
€2.45 EUR incl. VAT

Check reseller availability

Where to buy StarTech.com products
RJ25FT

25 ft RJ11 Telephone Modem Cable

Position your modem up to 25ft from your computer

Your price
€3.99 EUR excl. VAT
€4.91 EUR incl. VAT

In stock: 142

SVA12M2NEUA

DC Power Adapter - 12V, 2A

Replace your lost or failed power adapter

Your price
€24.99 EUR excl. VAT
€30.74 EUR incl. VAT

In stock: 334

Where to buy StarTech.com products
SVA12M5NA

DC Power Adapter - 12V, 5A

Replace your lost or failed power adapter

Your price
€62.99 EUR excl. VAT
€77.48 EUR incl. VAT

Check reseller availability

Where to buy StarTech.com products

Drivers/Downloads

Talk to an Advisor

We are always ready to assist you with any questions you may have.

Live Chat (opens in new window)

Manual(s):

Datasheet

Product Support

Talk to an Advisor

We are always ready to assist you with any questions you may have.

Live Chat (opens in new window)

Compliance and safety

Compliance letters

  • WEEE
    • Language: English
  • RoHS
    • Language: English

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
*Product appearance and specifications are subject to change without notice.

Customer Reviews

(0 reviews)
0 out of 5 stars
  • 5 (0)
  • 4 (0)
  • 3 (0)
  • 2 (0)
  • 1 (0)
Tell us what you think of this product.
Need a little help getting started?

Check out our review guidelines.

Feedback Back to top