Product ID: SATAPOWADAPR
This 6-inch 4-Pin LP4 to Right Angle SATA power adapter features one 4-Pin LP4 male connector and one (female) right angle SATA power connector, allowing you to power a Serial ATA hard drive from a conventional LP4 connection, eliminating the need to upgrade the computer power supply for compatibility with the SATA hard drive.
This LP4 to Right Angle SATA adapter is backed by StarTech.com's Lifetime Warranty.
|Connector(s)||1 - Connector A||LP4 (4 pin; Large Drive Power)|
|1 - Connector B||SATA Power (15 pin)|
|Hardware||Cable Jacket Material||PVC - Polyvinyl Chloride|
|Packaging Information||Package Height||0,1 mm [0,0 in]|
|Package Length||22,5 cm [8,9 in]|
|Shipping (Package) Weight||17,0 g [0,6 oz]|
|Package Width||12,5 cm [4,9 in]|
|Physical Characteristics||Product Height||0,0 mm [0,0 in]|
|Weight of Product||11,5 g [0,4 oz]|
|Product Width||0,0 mm [0,0 in]|
|Connector Style||Straight to Right Angle|
|Wire Gauge||18 AWG|
|Cable Length||15,2 cm [6,0 in]|
|Product Length||15,2 cm [6,0 in]|
|What's in the Box||1 - Included in Package||6 inch LP4 Male to SATA Power Adapter|
When you troubleshoot issues with an internal power cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
To test your setup components, try the following:
Use the power supply, computer part, and power cable in another setup to see if the problem is with the components or the setup.
Use a different power supply, computer part, and power cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cable, it is recommended that you do the following:
Make sure that the cable is firmly inserted into both ends.
The polarity (usually indicated by the color of the cables) matches.
No pins are bent or missing on the power supply cable or header, or the computer part.