IP67 Certified 2T2R 2.4GHz Outdoor Wireless-N Access Point - PoE-Powered 300 Mbps 802.11b/g/n WiFi AP
Add 2.4GHz WiFi coverage to an outdoor area, with a ruggedized industrial access point - PoE Powered
Product ID: R300WN22ODE
The R300WN22ODE Outdoor Wireless Access Point lets you add 2.4GHz Wireless-N network coverage to an outdoor area, through a ruggedized industrial access point.
This outdoor access point features an IP67 certified, die-cast metal enclosure with heavy-duty cable grommets so it can withstand the outdoor elements and offers pole and wall-mounting options. Plus, the PoE-powered AP includes a passive Power-over-Ethernet injector, enabling you to install it in locations where a typical power outlet is unavailable. PoE pass-through via the secondary LAN port lets you connect data and power to a PoE-capable device near the access point.
For optimal wireless coverage, the AP broadcasts a signal through a high-powered 800mW internal 10dBi 2T2R antenna, with 802.11b/g/n compatibility to easily connect most wireless devices new or old.
The device offers support for several different operating modes (AP, WDS and WISP), which help you to create a wireless network from a wired connection, bridge multiple APs together or extend the range of an existing wireless network. The AP supports Wireless-N data rates up to 300Mbps with security through WEP, WPA, or WPA2 authentication, all configurable through an easy-to-use web-based utility.
Backed by a StarTech.com 2-year warranty and free lifetime technical support.
The StarTech.com Advantage
- Withstand the harsh elements, with the rugged metal IP67 rated housing
- Customize your wireless network as needed, with support for several operating modes
- Deploy a PoE network device in remote locations with a secondary PoE pass-through LAN port
Create an outdoor Wireless-N access point from an existing wired or wireless connection to eliminate network dead spots and allow wireless devices to connect across large open spaces
Use WDS (Wireless Distribution System) to mesh multiple Access Points together
Connect smartphones, tablets or laptops to a Wireless B/G/N access point
Use the secondary LAN port to deploy remote PoE-Powered devices such as switches or IP cameras
|Ingram Micro España||V933385|
|Antenna Configuration||2x2:2 (TxR:S)|
|Chipset ID||Atheros - AR9341|
|Industry Standards||IEEE 802.3, IEEE 802.3u IEEE 802.11b/g/n|
|Frequency Range||2.4 ~ 2.4835 GHz|
|Full Duplex Support||Yes|
|Max Distance||3.7 km (2.3 mi)|
|Maximum Data Transfer Rate||300 Mbps|
|WEP Data Encryption|
|WPA and WPA2-PSK Data Encryption|
|WPA and WPA2 Enterprise Data Encryption|
|Connector Type(s)||1 - Wireless N (IEEE 802.11n)|
|Internal Ports||2 - RJ-45 Female|
|Special Notes / Requirements|
|System and Cable Requirements||Available indoor AC electrical outlet|
|Cat 5 (or better) network cabling from PoE Injector to Wireless AP and PoE Injector to LAN Switch/router (no more than 100m total)|
|LED Indicators||3 - Wireless Signal Strength|
|1 - Power|
|2 - LAN Link / Activity|
|Center Tip Polarity||Positive|
|Input Current||1 A|
|Input Voltage||100 ~ 240 AC|
|Output Current||0.5 A|
|Output Voltage||48 DC|
|Power Consumption (In Watts)||13.5|
|Power Source||AC Adapter Included|
|Humidity||100% RH Non-Condensing|
|Operating Temperature||-30°C to 60°C (-22°F to 140°F)|
|Storage Temperature||-30°C to 85°C (-22°F to 185°F)|
|Enclosure Type||Aluminum and Plastic|
|Product Height||58 mm [2.3 in]|
|Product Length||161 mm [6.3 in]|
|Product Weight||686 g [24.2 oz]|
|Product Width||100 mm [3.9 in]|
|Shipping (Package) Weight||1246 g [44 oz]|
|What's in the Box|
|Included in Package||1 - Outdoor Wireless Access Point|
|1 - PoE Injector|
|1 - Pole Mounting Kit|
|1 - Power Adapter|
|1 - Quick Start Guide|
Add 5GHz WiFi coverage to an outdoor area, with a ruggedized industrial access point - PoE Powered
Create a long-range, high-performance Wireless-N network from a wired connection – PoE powered
Create or extend the range of a Wireless-N (300Mbps) WiFi network to an outdoor location
Drivers & Downloads
Frequently Asked Questions
This device's default static IP address is 192.168.2.254.
- Make sure that the R300WN22MOD is on the same network as your computer.
- In an Internet browser, enter the IP address of the unit. The default IP address is 192.168.2.254.
- In the user name field, enter the user name. The default user name is root.
- In the password field, enter the password. The default password is default.
* Product appearance and specifications are subject to change without notice.