Some cookies are essential to ensure our website works for you. You may block or delete all cookies from this site but parts of the site may not work. To find out more about how we use cookies, see our privacy statement.

OK

×

Are you in the United States?

Visit our U.S.A. & International site for relevant pricing, distribution and product availability information.

Go to StarTech.com

2x M.2 NGFF SSD RAID Controller Card plus 2x SATA III Ports - PCIe

Product ID: PEXM2SAT3422

Add two Next Generation Form Factor M.2 SSDs and two SATA ports to your computer through PCI Express

Features
  • Recover data or improve the performance and storage capacity of your desktop, by adding two M.2 solid-state drives (SSD) plus two SATA III drives

  • Create a high-performance hardware RAID array to protect and back up your data or expand your storage — supports RAID 0, 1, 10 (1+0)

  • Wide installation compatibility, with support for virtually all M.2 NGFF drives (22110, 2280, 2260, 2242, 2230), as well as hybrid drives

More Features . . .
  • Port multiplier lets you connect up to seven drives total, including two M.2 drives

  • Two M.2 B-Key onboard sockets that support SATA III transfer speeds up to 6Gbps

  • Adjustable stand-offs, and multiple mounting holes support 110 mm, 80 mm, 60 mm, 42 mm, and 30 mm SSDs

  • Fast, hassle-free setup with native support on most operating systems

  • Compliant with PCI Express 2.0 standards

  • Supports Native Command Queuing (NCQ), as well as ATA and ATAPI commands

  • PCIe bus-powered, or powered by your computer’s power supply using a 4-pin floppy power connector (small drive power)

  • Equipped with a full-profile bracket, includes a low-profile (half-height bracket) for installation in small form-factor computers

  • Installs into x4, x8, or x16 PCIe slots

Prices may be lower from Resellers:

EPIT
INGIT
Available in
€ 115,99 EUR exc VAT
€ 139,19 inc VAT

ID: PEXM2SAT3422

May be in stock with Resellers/Distributors

For more products like this please visit our European online store today!

This M.2 SSD RAID controller card lets you install two M.2 NGFF (Next Generation Form Factor) drives in your desktop computer. The card also features two SATA III (6Gbps) ports and supports hardware RAID. Now, you can merge the speed and compact size of M.2 solid state drives (SSD) with the storage capacity of traditional hard disk drives (HDD).

Leverage the size and speed of M.2 drives

This M.2 controller card lets you take advantage of the size and performance benefits of NGFF SSDs. M.2 drives are smaller than typical platter drives or mSATA-based SSDs, so you can install them in small form-factor PCs and servers, or in tighter areas within your computer case.

When you couple the card with an M.2 drive, you can give your computer’s performance a noticeable speed boost. By installing your operating system on the M.2 drive, you'll have faster access to the files you commonly use, and you can continue to use your higher-capacity platter HDD for bulk storage.

Peace of mind, with simple and cost-effective data recovery

Due to their performance and size advantages, M.2 drives are commonly used in laptops. If your laptop has failed but its M.2 drive is functional, then this card can help with data recovery. Once the M.2 drive is installed and the data recovery is complete, you can continue to use the drive for storage and backup purposes.

Build a high-performance RAID array

If you need a scalable, internal storage solution that you can count on, then this card can help. It supports a range of RAID configurations (RAID 0, 1, and 10), giving you multiple ways to expand your storage, improve your computer’s performance, or to create data redundancy backups.

Connect even more drives with port multiplication

Because the M.2 card supports port multiplication, you can connect up to four drives to one of the card’s SATA ports. With a built-in port multiplier, you can install up to seven drives (two M.2 SSDs, five SATA drives) in your computer through this single drive controller.

Supports a wide range of drives

You can rest assured that your M.2 SATA drives are compatible with the card. It supports the most common drive sizes, including 22110, 2280, 2260, 2242 and 2230. For more versatility, the card also supports hybrid drives.

The PEXM2SAT3422 is backed by a StarTech.com 2-year warranty and free lifetime technical support.

Common Customer Questions

View FAQs...

Compatible With

View full OS compatibility

Windows® XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016
Mac OS® 10.6 to 10.13
Linux 3.5.x to 4.11.x LTS versions only
Note: Connected drives cannot be used as System / Primary drive in Windows Server 2012, 2012 R2, 2016

Applications
  • Increase the internal storage capacity of your standard or small form-factor computer
  • Create a RAID array and add the security of data redundancy and increased storage to your PC
  • Access and recover data from almost any M.2 SSD, such as drives pulled from laptops and other computers
  • Optimize your system for I/O intensive applications such as office suites, photo and video editing, and media players
Product Numbers
Warranty Information
Warranty 2 Years
Hardware
Bus Type PCI Express
Card Type Standard Profile (LP bracket incl.)
Chipset ID Marvell - 88SE9230
Industry Standards Serial ATA 3.0 specification - SATA I/II/III (1.5/3/6Gbps)
PCI Express 2.0
Hardware RAID 0, RAID 1, RAID 10
Interface M.2 SATA
SATA
Port Style Integrated on Card
Ports 2
Performance
ATAPI Support Yes
Bootable Yes
Number of Drives Supported Through Port Multiplier 1 to 4
Number of Ports That Support Port Multiplier 2 (can only use 1 PM at a time)
Port Multiplier Yes
RAID Yes
Supported RAID Modes JBOD - (Just a Bunch of Disks)
RAID 1 (Mirrored Disks)
RAID 0 (Striped Disks)
RAID 10 (1+0, Striped set of Mirrored Subset)
Type and Rate SATA III (6 Gbps)
Connector(s)
Connector Type(s) 1 - PCI Express x4 Male
Internal Ports 2 - M.2 SATA (NGFF, B-Key) Receptacle
2 - SATA (7 pin, Data) Plug
1 - SP4 (4 pin, Small Drive Power) Male
Software
OS Compatibility Windows® XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016
Mac OS® 10.6 to 10.13
Linux 3.5.x to 4.11.x LTS versions only
Note: Connected drives cannot be used as System / Primary drive in Windows Server 2012, 2012 R2, 2016
Special Notes / Requirements
Note The maximum throughput of this card is limited by the bus interface. If used with PCI Express Gen 1.0 enabled computers, the max throughput is 2.5Gbps per lane. If used with PCI Express Gen 2.0 enabled computers, the max throughput is 5Gbps per lane.
The card's two SATA ports support port multiplier, up to seven drives total (including two M.2 drives). Only one SATA port can use port multiplier at a time, with up to four drives total connected through PM (in a non-RAID configuration)
System and Cable Requirements PCI Express x4 slot (backward compatible with x8, and x16 slots)
Indicators
LED Indicators 2 - M.2 drive LEDs (Green)
3 - Pin headers for LEDs
Environmental
Humidity 20%~80% RH (Non-condensing)
Operating Temperature 5°C to 50°C (41°F to 122°F)
Storage Temperature -25°C to 70°C (-13°F to 158°F)
Physical Characteristics
Product Height 120 mm [4.7 in]
Product Length 180 mm [7.1 in]
Product Weight 68 g [2.4 oz]
Product Width 20 mm [0.8 in]
Packaging Information
Shipping (Package) Weight 174 g [6.1 oz]
What's in the Box
Included in Package 1 - M.2 SSD RAID controller card
1 - low-profile bracket
2 - M.2 mounting screws
1 - quick-start guide
2x M.2 SSD Controller Card - PCIe
PEX2M2

2x M.2 SSD Controller Card - PCIe

Add two Next Generation Form Factor (NGFF) M.2 SATA SSDs to your computer through PCI Express

€ 95,99 exc VAT
€ 115,19 inc VAT

M.2 SSD to 2.5in SATA Adapter Converter
SAT32M225

M.2 SSD to 2.5in SATA Adapter Converter

Convert an M.2 SSD into a 7mm high 2.5in SATA 6Gbps Open Frame SSD

€ 29,99 exc VAT
€ 35,99 inc VAT

4 x M.2 SATA Mounting Adapter for 3.5in Drive Bay
35S24M2NGFF

4 x M.2 SATA Mounting Adapter for 3.5in Drive Bay

Enhance your system by mounting four M.2 SATA-based SSDs into one 3.5” drive bay

€ 65,99 exc VAT
€ 79,19 inc VAT

M.2 to SATA SSD Adapter - Expansion Slot Mounted
S32M2NGFFPEX

M.2 to SATA SSD Adapter - Expansion Slot Mounted

Mount an M.2 NGFF SSD into your desktop computer, using a standard SATA host connection

€ 24,99 exc VAT
€ 29,99 inc VAT

M.2 to SATA SSD Enclosure - USB 3.0 with UASP - External Enclosure
SM2NGFFMBU33

M.2 to SATA SSD Enclosure - USB 3.0 with UASP - External Enclosure

Turn your solid state drive into an ultra-portable pocket drive

€ 39,99 exc VAT
€ 47,99 inc VAT

M.2 SSD to 2.5in SATA III Adapter - M.2 Solid State Drive Converter with Protective Housing
SAT2M2NGFF25

M.2 SSD to 2.5in SATA III Adapter - M.2 Solid State Drive Converter with Protective Housing

Convert an M.2 solid state drive into a standard 2.5in form factor 6Gbps SSD

€ 34,99 exc VAT
€ 41,99 inc VAT

2-Port PCI Express 2.0 SATA III 6Gbps RAID Controller Card with 2 mSATA Slots and HyperDuo SSD Tiering
PEXMSATA3422

2-Port PCI Express 2.0 SATA III 6Gbps RAID Controller Card with 2 mSATA Slots and HyperDuo SSD Tiering

Combine SSD performance with HDD capacity to create a HyperDuo array with 2 x mSATA and 2 x SATA drives through a single PCI Express slot

€ 115,99 exc VAT
€ 139,19 inc VAT

3 Port PCI Express 2.0 SATA III 6 Gbps RAID Controller Card w/ mSATA Slot and HyperDuo SSD Tiering
PEXMSATA343

3 Port PCI Express 2.0 SATA III 6 Gbps RAID Controller Card w/ mSATA Slot and HyperDuo SSD Tiering

Add 1 internal mSATA slot and 3 internal SATA III (6Gbps) ports to a computer through a PCI Express x2 slot

€ 52,99 exc VAT
€ 63,59 inc VAT

4 Port PCI Express 2.0 SATA III 6Gbps RAID Controller Card with HyperDuo SSD Tiering
PEXSAT34RH

4 Port PCI Express 2.0 SATA III 6Gbps RAID Controller Card with HyperDuo SSD Tiering

Add 4 Internal SATA III (6Gbps) ports to a computer through a PCI Express x2 slot

€ 107,99 exc VAT
€ 129,59 inc VAT

LP4 to SATA Power Cable Adapter with Floppy Power
LP4SATAFMD

LP4 to SATA Power Cable Adapter with Floppy Power

Power up to two 4-pin Molex hard drives or devices, and a floppy drive, from a single SATA power supply connector

€ 5,99 exc VAT
€ 7,19 inc VAT

* Product appearance and specifications are subject to change without notice.