USB 3.0 / eSATA 5-Bay Hot-Swap 2.5/3.5” SATA III Hard Drive Enclosure with UASP – 5-Bay SATA 6 Gbps Enclosure for HDD / SSD
Connect five hot-swappable 2.5/3.5" SATA III hard drives to your computer externally through USB 3.0 with UASP or eSATA
Product ID: S355BU33ERM
The S355BU33ERM 5-bay Removable Hard Drive Enclosure lets you access five individual 2.5" or 3.5" hard drives simultaneously, through a single eSATA or USB port connection to your laptop or desktop computer.
For fast performance and efficient data transfers, you can connect the removable drive enclosure to your computer through either eSATA or USB 3.0. The enclosure supports full SATA III data transfer rates up to 6 Gbps, when connected through eSATA. When connected through USB 3.0, the enclosure supports transfer speeds up 5 Gbps plus support for UASP, which performs up to 70% faster than conventional USB 3.0 when paired with a UASP-enabled host controller.
With support for the fastest drive technologies available including SATA III (6 Gbps), hybrid drives and solid state drives (SSD), the enclosure helps you save time through optimized performance from your external storage.
For optimal drive performance and longevity, the HDD/SSD enclosure features a built-in fan, which helps cool your drives while ensuring maximum heat dissipation.
To ensure compatibility with your computer system, the S355BU33ERM supports all of the leading operating systems, including: Microsoft Windows® (8/7/Vista/XP/Server 2008/Server 2003), Apple® OSX (10.9/10.8/10.7/10.6), Linux, and Google Chrome OS™.
The S355BU33ERM is backed by a StarTech.com 2-year warranty and free lifetime technical support.
Improved Performance with UASP
UASP is supported in Windows 8, Mac OSX (10.8 or above), and Linux. In testing, UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance.
At the same peak in testing UASP also shows an 80% reduction in required processor resources.
Testing results were obtained using an Intel® Ivy Bridge system, a UASP-enabled StarTech.com Enclosure, and a SATA III solid state drive.
- Add a 5-bay hot-swap enclosure to a server or workstation computer, for a removable backup solution
- Expand the storage capabilities of a small form factor/embedded system or laptop, with external drives
- Adding external storage capacity for video editing or photo editing stations, making it easier to work with very large file sizes
- Creating additional backup/archive storage
- Turn unused SATA hard drives into additional external data storage
The StarTech.com Advantage
- Versatile connectivity options, through either USB or eSATA
- Maximize performance, with SATA III file transfer speeds up to 6Gbps using eSATA
- Save time, with file transfers up to 70% faster than traditional USB 3.0 when used with a UASP-supported host
Ingram Micro Italy
Tech Data - Italy
|Bus Type||USB 3.0|
|Chipset ID||JMicron - JMB575M
JMicron - JMS567
|Compatible Drive Types||SATA|
|Drive Size||2.5in & 3.5in|
|Fan Bearing Type||Sleeve Bearing|
|Fans||1 - 120 mm|
|Interface||USB 3.0 & eSATA|
|Number of 2.5 inch bays||5|
|Number of Drives||5|
|Number of internal 3.5 inch bays||5|
|Air Flow Rate||35CFM|
|General Specifications||Supports 2.5in Solid State Drives (SSD) and Hard Drives (HDD) using a 2.5in to 3.5in drive adapter such as 25SAT35HDD and 25SATSAS35|
|Hot Swap Capability||Yes|
|Max Drive Capacity||Currently tested with up to 6TB 7200 RPM hard drives|
|Maximum Data Transfer Rate||6 Gbps|
|Noise Level||20.4 dBA|
|Type and Rate||USB 3.0 - 5 Gbit/s|
|eSATA (6 Gbps)|
|Drive Connectors||5 - SATA Data & Power Combo (7+15 pin) Receptacle|
|Host Connectors||1 - USB Type-B (9 pin) USB 3.0 Female|
|1 - eSATA (7 pin, Data) Female|
|OS Compatibility||OS independent; No software or drivers required|
|LED Indicators||5 - Drive Activity / Interface LED|
|1 - Power LED|
|1 - HDD Ready LED|
|1 - USB / eSATA LED|
|Humidity||10% ~ 90% non-condensing|
|Operating Temperature||5°C to 55°C (41°F to 131°F)|
|Storage Temperature||-40°C to 70°C (-40°F to 158°F)|
|Product Height||21.5 cm [8.5 in]|
|Product Length||28.1 cm [11.1 in]|
|Product Width||15.1 cm [5.9 in]|
|Weight of Product||4 kg [8.8 lb]|
|Package Height||21.2 cm [8.3 in]|
|Package Length||34.6 cm [13.6 in]|
|Package Width||32.3 cm [12.7 in]|
|Shipping (Package) Weight||5.3 kg [11.6 lb]|
|What's in the Box|
|Included in Package||1 - USB 3.0 / eSATA SSD/HDD Enclosure|
|5 - 2.5/3.5” drive trays (preinstalled)|
|1 - SATA to eSATA full profile bracket|
|1 - eSATA cable|
|1 - USB 3.0 cable|
|1 - 2.5/3.5” drive installation screw kit|
|3 - Power cables (NA/UK/EU)|
|1 - Instruction manual|
USB 3.0 / eSATA 8-Bay Hot-Swap 2.5/3.5” SATA III Hard Drive Enclosure with UASP – 8-Bay SATA 6 Gbps Enclosure for HDD / SSD
Connect eight hot-swappable 2.5/3.5" SATA III hard drives to your computer externally through USB 3.0 with UASP or eSATA
Create an external dual 3.5in HDD SATA RAID array, connected through either USB 3.0 with UASP or eSATA
Connect two 3.5" SATA III hard drives to your computer through USB 3.0 with UASP in a RAID array, and charge or connect USB devices with the built-in 2-port USB 3.0 fast charge hub
USB 3.0 / eSATA Dual-Bay Trayless 3.5” SATA III Hard Drive Enclosure with UASP - 2-Bay SATA 6 Gbps Hot-Swap HDD Enclosure
Connect two hot-swappable 3.5" SATA III hard drives to your computer externally through USB 3.0 with UASP or eSATA
Extend a USB 3.0 port from the back of your computer to your desktop
Connect USB 3.0 devices, even in hard to reach areas and tight spaces
Extend your USB 3.0 SuperSpeed cable an additional 6 feet
Add Two eSATA 3.0 (6Gbps) Ports for High Speed Access to Large External Storage Solutions
Add 2 external or internal SATA 6 Gbps ports to a computer, through a PCI Express slot
Add external and internal 6 Gbps SATA 3.0 ports for high speed storage access
Frequently Asked Questions
Before You Buy
To determine if your hard drive will work in this enclosure, on the product page, click the Technical Specifications tab, and do the following:
- Make sure that the enclosure supports the storage size of your hard drive. If the storage size of your hard drive is larger than what the enclosure was tested with, the hard drive will likely still work with the enclosure.
- Confirm that your hard drive uses the same interface type as the enclosure. For example, IDE, SATA, or M.2.
- Make sure that the enclosure supports the physical size of your hard drive, such as 2.5 inches or 3.5 inches.
- Make sure that the enclosure supports the height of your hard drive. For example, 9 mm or 15 mm.
- Verify that the power consumption of your hard drive doesn’t exceed the power output of the enclosure. If you’re using multiple hard drives, make sure that the combined power consumption of all of the hard drives doesn’t exceed the power output of the enclosure.
To confirm that the Mac OS detects your USB device, complete the following:
- Click the Apple icon.
- Click About This Mac.
- Click More Info or System Report.
- Under the appropriate heading, confirm that your USB device is listed and that there isn't an error. For example, a network card would be under Ethernet Cards.
You may need to refresh the System Information page after you plug in your device. To do so, press Command + R with the System Information page open.
Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.
SATA hard drive controllers require a feature called port multiplier to read more than one hard drive per SATA or eSATA port. The port multiplier feature is not standard on many SATA hard drive controllers.
If your computer is only recognizing one of your hard drives, you need to plug the eSATA cable into a SATA controller that includes the port multiplier feature. If none of your current hard drive controllers include this feature, you can add a hard drive controller that does support port multiplier in any available expansion slot (for example, PCI, PCI-Express, PCMCIA, CardBus, or ExpressCard). StarTech.com has hard drive controllers available that support the port multiplier feature. To view the hard drive controllers, click here: http://startech.com/Cards-Adapters/HDD-Controllers/SATA-Cards/?filter_PORTMULTIPLIER=Yes.
If you have a hard drive controller card that does support the port multiplier feature but it is only reading one hard drive at a time, update the drivers of the hard drive controller. To find the most current StarTech.com drivers, click here: http://www.startech.com/Support.
When you troubleshoot issues with a hard drive enclosure, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
- Hard drives
- Hard drive enclosure
To test your setup components, try the following:
- Use the cables, hard drives, and hard drive enclosure in another setup to see if the problem is with the components or the setup.
- Use a different cable, hard drive, and hard drive enclosure in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test the hard drive and hard drive enclosure, it is recommended that you do the following:
- To check Disk Management, press the Windows key + R, type diskmgmt.msc, and press Enter. Check to see if your hard drive is listed.
- If the hard drive is listed with unallocated space, the hard drive needs to be reformatted. Right-click unallocated and click New Simple Volume. Follow the on-screen instructions to complete the reformatting.
Note: Formatting a hard drive erases all of the data on it. Make sure that you back up all of your data before you reformat the hard drive.
- If the hard drive is listed as healthy but does not have a drive letter, for example, C:, right-click healthy and click Change Drive Letter and Paths. Click Add, assign a drive letter, and click OK.
Note: A formatted hard drive will not show up in Computer or My Computer until it has a drive letter assigned to it.
You should not upgrade your device's firmware if you do not have any issues with the functionality of your device. The only time you should consider an upgrade is if you are experiencing a problem with the device, and you have confirmed that the firmware addresses this problem. You can confirm this is the case by reviewing the documentation included with the firmware or by consulting with our Technical Support team. Incorrectly upgrading firmware can result in diminished performance so it is best to contact StarTech.com if you would like to perform this operation.
Compliance and Safety
- If product has an exposed circuit board, do not touch the product under power.
- If Class 1 Laser Product. Laser radiation is present when the system is open.
- Wiring terminations should not be made with the product and/or electric lines under power.
- Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
- Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Product appearance and specifications are subject to change without notice.