StarTech.com

Cisco SFP-GE-T Compatible Gigabit RJ45 Copper SFP Transceiver Module - Mini-GBIC

Add support for 1000 Mbps RJ45 copper Ethernet connections to networking equipment with spare SFP slots

Product ID: SFPC1110

  • Up to 1.25 Gbps bi-directional communication
  • 1000 Mbps Auto-Negotiation
  • Complies with SFP Multi-Source Agreements standards (MSA)
View More
  • RJ45 Ethernet connector
  • Fully Hot Pluggable
  • Auto crossover (MDI / MDI-X) detection
  • Compatible with Cisco equipment
€ 97,99 EUR exc VAT
€ 119,55 EUR inc VAT

Overview

The SFPC1110 Cisco Compatible Gigabit RJ45 Copper SFP Transceiver Module (Mini-GBIC) is built to comply with MSA (Multi-Sourcing Agreement) standards to offer a cost-effective way to add, replace or upgrade a copper Ethernet port on your 1000 Base-T networking equipment.

Featuring 1000 Mbps Auto-negotiation at distances up to 100m (330 feet), this Ethernet SFP module can be installed into any fiber networking devices with an MSA or Cisco compliant SFP port. Delivering convenience and scalability, this copper transceiver is fully hot-pluggable, allowing you to install the module without interrupting network traffic or requiring a device reboot.

This SFP module is compatible with the Cisco SFP-GE-T transceiver.

Backed by a StarTech.com lifetime warranty and free lifetime technical support.

The StarTech.com Advantage

  • Fully compliant with MSA standards, this hot pluggable module can be installed into any networking device with an MSA compliant or Cisco compliant port
  • A convenient way to add a copper connection to an SFP type switch that would typically be used for fiber SFPs

Applications

Replacing defective or damaged SFPs in MSA compliant or Cisco equipment

Expand your network to remote segments

Technical Specifications

Warranty Information
Warranty Lifetime
Hardware
Compatible Brand Cisco
Industry Standards IEEE 802.3ab 1000BASE-T
Performance
Auto MDIX Yes
Compatible Networks 1000 Mbps (1 Gbps)
DDM No
Max Transfer Distance 100 m (328 ft)
Maximum Data Transfer Rate 1.25 Gbps
MTBF 4,655,371 hours
Type Copper
Connector(s)
Local Unit Connectors 1 - RJ-45 Female
Environmental
Humidity 30~70% RH
Operating Temperature 0°C to 70°C (32°F to 158°F)
Storage Temperature -40°C to 85°C (-40°F to 85°F)
Physical Characteristics
Product Height 13 mm [0.5 in]
Product Length 70 mm [2.8 in]
Product Weight 21 g [0.7 oz]
Product Width 13 mm [0.5 in]
Packaging Information
Shipping (Package) Weight 95 g [3.4 oz]
What's in the Box
Included in Package 1 - 10/100/1000 Mbps RJ45 SFP

Certifications

Related Products

Gigabit 850nm Multi Mode SFP Fiber Optical Transceiver - LC 550m
SFPSXMM
Gigabit 850nm Multi Mode SFP Fiber Optical Transceiver - LC 550m

Add, replace or upgrade SFP modules on gigabit fiber equipment

€ 95,99 exc VAT
€ 117,11 inc VAT

Accessories

Product Support

Frequently Asked Questions

Before You Buy

SFP fiber transceivers (mini-GBIC) are specific to applications and therefore, you need to select the correct fiber transceiver for your application. StarTech.com offers a few types of fiber transceivers: Cisco®, Cisco Meraki®, HP®, and Juniper® compatible, as well as standard gigabit SFP converters. Although the transceivers may be referred to as GBIC or mini-GBIC, the correct terminology for the device is small form-factor pluggable transceiver or SFP . StarTech.com does not carry GBIC converters.

If your device is not a Cisco device, it can still use Cisco compatible SFPs. Cisco SFPs are specifically coded to be compatible with Cisco devices. A standard SFP will not work in a Cisco device.

StarTech.com offers two different output connector types for SFPs: RJ-45 and fiber.

No special requirements are necessary to use RJ-45 SFPs. However, if you use fiber transceivers, the following items need to be the same as the interconnecting equipment:

  • The connector type, such as LC, SC, or ST.

  • The mode (single mode or multi mode).

  • The wavelength, such as 850 nm, 1310 nm, or 1550 nm.

  • The DDM support.

  • The speed, such as 10Gbps.

Note: The properties listed above cannot be converted or changed by a cable, excluding the connector type.