Industrial RS232 to RS422/485 Serial Port Converter with 15KV ESD Protection
Convert an RS232 data signal to either RS485 or RS422 with this wall-mountable, ESD-protected adapter
Product ID: IC232485S
The IC232485S Industrial RS232 to RS-422/485 Serial Converter is a bi-directional adapter that lets you adapt an RS232 data signal to either RS485 (2 or 4-wire) or RS422 and vice-versa, with support for baud rates up to 921.6 Kbps.
Ideal for industrial environments, the serial port converter provides 15KV ESD protection on all signal pins to protect costly and often sensitive control equipment against electrical damage. The serial converter also features a sturdy wall-mountable metal housing with Power, Tx and Rx LED indicators for simple status monitoring.
The adapter supports auto baud rate detection as well as RS-422 and RS485 mode detection, with an integrated dip switch for manual mode selection if needed, and supports connection distances of up to 4000ft (1200m).
Backed by a 2-year StarTech.com warranty and free lifetime technical support.
The StarTech.com Advantage
- Protect sensitive industrial equipment with integrated ESD protection
- Communicate efficiently with connected devices through high-speed 921Kbps support
- Suitable for industrial environments with a rugged, wall-mountable enclosure
|Port Style||Cable Adapters|
|Max Baud Rate||921.6 Kbps|
|Maximum Cable Length||3936 ft [1200 m]|
|Connector Type(s)||1 - DB-9 (9 pin, D-Sub) Female|
|1 - DB-9 (9 pin, D-Sub) Male|
|LED Indicators||1 - Power (Green)|
|1 - Rx (Yellow)|
|1 - Tx (Yellow)|
|Center Tip Polarity||Positive|
|Input Current||0.3 A|
|Input Voltage||100 - 240 AC|
|Output Current||1 A|
|Output Voltage||5 DC|
|Power Consumption (In Watts)||5|
|Power Source||AC Adapter Included|
|Operating Temperature||0°C to 50°C (32°F to 122°F)|
|Storage Temperature||-20°C to 60°C (-4°F to 140°F)|
|Product Height||0.9 in [2.2 cm]|
|Product Length||4.6 in [11.7 cm]|
|Product Width||2.3 in [59 mm]|
|Weight of Product||5 oz [143 g]|
|Package Height||1.6 in [41 mm]|
|Package Length||5.7 in [14.6 cm]|
|Package Width||8.2 in [20.8 cm]|
|Shipping (Package) Weight||12.4 oz [351 g]|
|What's in the Box|
|Included in Package||1 - RS-232 to RS-422/485 Converter|
|1 - Universal Power Adapter (NA/EU/UK)|
|1 - Instruction Manual|
Frequently Asked Questions
When you troubleshoot issues with a serial device, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
To test your setup components, try the following:
Use the serial cable, serial port, and serial device in another setup to see if the problem is with the components or the setup.
Use a different serial cable, serial port, and serial device in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cables, it is recommended that you do the following:
Test each cable individually.
Use short cables when you are testing.
When you test the serial ports and serial device, it is recommended that you do the following:
Press the Windows key + R, type devmgmt.msc, and press Enter to open Device Manager. Check to see if your device is listed under Ports (COM & LPT).
Make sure that the COM port number is the correct number for the serial device and that the software being used to connect the computer to the serial device uses the correct COM port number.
If the device is listed with an error, follow the instructions on the website to reinstall the drivers.
Note: Some serial devices work only if the COM port number is between a certain range. For example, COM1 to COM4.
Perform a serial loopback test. See this FAQ on how to perform a RS-232 serial loopback test: http://www.startech.com/faq/serial_loopback_test_rs232_windows
To check whether or not an RS-232 serial port is working, perform an RS-232 loopback test by doing the following:
- If your serial port is not female, convert it by taking a female/female cable or gender changer and plugging it into the serial port.
- Take a metal paperclip or wire and cross pins 2 and 3. If you look closely at the female end, the pins should be numbered.
- Open a telnet session on the COM port number of the device that you are testing. To find out the COM port number, refer to the following FAQ: https://www.startech.com/faq/com-port-listing-windows.
Note: To open a telnet session on the COM port, you need a telnet client like PuTTY or Hyper Terminal. Windows XP comes with Hyper Terminal.
- When the session is open, anything you type into it you should see. The loopback test fails when you cannot see what you are typing.
If the loopback test fails, make sure that the serial cable or gender changer that you are using works and that the adapter is in the correct port.
You can check multiple ports at the same time by opening multiple sessions, putting the loopback adapter on one port, and trying to type into each session. When you can see what you are typing, you know that the COM port is working and you can see which port number the physical serial port is. Close the window for the port that you just tested to speed up the testing of the remaining serial ports.
For products related to this article, click here.
[WAITING ON INFO FROM ALEX]
To check whether or not a RS-422 serial port is working, perform a RS-422 loopback test.
- Convert your serial port to be female if it is not already. You can do this by taking a female/female cable or gender changer and plugging it into the serial port.
- Take a metal paperclip or wire and cross pins T- with R- and T+ with R+. The device or the manual should indicate what pins are T+, T-, R+ and R-.
- Open a telnet session on the COM port number in question. To find out the COM port number of the device you want to test, please see “How do I check to ensure the COM port is listed properly in Windows XP, Vista, 7 or 8?”
- To open a telnet session on the COM port, you need a telnet client like PuTTY or Hyper Terminal.
- Note: Windows XP comes with Hyper Terminal.
When the session is open, anything you type into it you should see. The loopback test fails when you cannot see what you are typing in this window.
Compliance and Safety
- If product has an exposed circuit board, do not touch the product under power.
- If Class 1 Laser Product. Laser radiation is present when the system is open.
- Wiring terminations should not be made with the product and/or electric lines under power.
- Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
- Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Product appearance and specifications are subject to change without notice.