Niet meer leverbaar

HDMI via IP Verlenger met Audio

Deel een HDMI®-beeldscherm of -projector via een IP-netwerk

Productcode: IPUSB2HD2

  • HDMI® via IP voor gedeelde toegang via een netwerk
  • Ondersteuning van resoluties tot 1920x1080 (1080p)
  • Audio via HDMI of 3,5 mm aansluiting

De IPUSB2HD2 HDMI® via IP Verlenger zorgt voor een veelzijdige HDMI-IP-verbinding tussen de computers op uw netwerk en een HDMI-monitor/projector met de volle HD-videoresolutie (1080p, 1920x1080). Bijbehorende audiosignalen worden direct doorgegeven via de HDMI-uitgang of apart via de ingebouwde 3,5 mm stereo-uitgang.

De IP/HDMI-adapter is een ideale oplossing voor het delen van een monitor of projector via een Ethernet-netwerk, zodat zelfs pc's zonder digitale video-uitgang kunnen worden aangesloten via een router tot op afstanden van 100m. Het is bovendien voorzien van twee USB 2.0-poorten voor het aansluiten en delen van randapparatuur zoals USB-opslagmedia, een toetsenbord of muis met de aangesloten pc.

Het kan ook rechtstreeks worden aangesloten als een USB-naar-HDMI-adapter.

How it works diagram

Met 2 jaar garantie en gratis levenslange technische ondersteuning door StarTech.com

Toepassingen

  • Sluit meerdere pc’s aan op één beeldscherm of projector op een lokaal netwerk en schakel tussen computers voor presentaties in uw bedrijf
  • Met HDMI-via-IP is afstand niet langer een probleem voor het aanbieden van HD-video en audio aan uw publiek in winkels of voor narrowcasting
  • Voor home theater en mediacenter toepassingen zoals het streamen van films of foto's en internetten op uw HDTV
  • Bedien uw PC vanaf een externe locatie door het aansluiten van een toetsenbord of muis op de ingebouwde USB-poorten
  • Voor gebruik in het onderwijs – studenten kunnen hun werk voor iedereen zichtbaar weergeven op een centrale monitor of projectorscherm

Het voordeel van StarTech.com

  • De optie van USB-naar-HDMI of HDMI-via-IP biedt maximale flexibiliteit voor elke toepassing waarvoor een PC-naar-HDMI-aansluiting nodig is
  • Twee ingebouwde USB-poorten voor het aansluiten van randapparatuur op de monitorlocatie geven u de flexibiliteit de pc op afstand te besturen of ermee te communiceren
  • Het omzetten van USB naar HDMI gebeurt inclusief audio – een complete HDMI-oplossing voor elke toepassing

Partnernummers

  • Ingram Micro Belgium 1861192
  • UPC 065030844383

Compatibility

  • Windows 7 logo
  • Windows 8 logo
  • Windows 10 logo
Windows® 10 (32/64)
8 / 8.1 (32/64)
7 (32/64)
Vista (32/64)
XP (32/64)

Specificaties

Warranty Information Warranty 2 Years
Connector(en) 1 - Type connector(en) USB Mini-B (5-polig)
2 - Type connector(en) USB Type-A (4-polig) USB 2.0
3,5 mm mini-jack (3 standen)
1 - Type connector(en) HDMI (19-polig)
RJ-45
Fysieke eigenschappen Kleur Zwart
Type behuizing Kunststof
Lengte product 13,2 cm [5,2 in]
Breedte product 71 mm [2,8 in]
Hoogte product 28 mm [1,1 in]
Gewicht product 134 g [4,7 oz]
Gebruiksomgeving Bedrijfstemperatuur 0°C ~ 70°C (32°F ~ 158°F)
Opslagtemperatuur 0°C ~ 85°C (32°F ~ 185°F)
Vochtigheid 10% - 80% rel. luchtvochtigheid
Hardware Poorten 1
AV-ingang Ethernet
USB 2.0
AV-uitgang HDMI
Bekabeling Cat5 UTP of beter
Audio Ja
Chipsetcode DisplayLink - DL-165
Op elkaar aansluitbaar Nee
Prestaties Maximale overdrachtsnelheid USB - 480 Mbit/s
Ethernet - 1 Gbit/s (1000 Mbit/s)
Max. afstand 100 m / 330 ft
Maximale digitale resoluties 1080p / 1920x1080
Ondersteuning breedbeeld: Ja
Algemene specificaties Deze USB-videoadapter maakt gebruik van een DisplayLink family chipset. Als u dit apparaat aansluit op een computer samen met extra USB-videoadapters of docking stations, vermijd dan het gebruik van apparaten met een Trigger of Fresco family chipset.
Software Besturingssystemen Windows® 10 (32/64)
8 / 8.1 (32/64)
7 (32/64)
Vista (32/64)
XP (32/64)
Microsoft WHQL-gecertificeerd Ja
Verpakkingsinformatie Package Length 22,5 cm [8,9 in]
Package Width 15 cm [5,9 in]
Package Height 60 mm [2,4 in]
Verzendgewicht (verpakt) 460 g [16,2 oz]
Voeding Inclusief voedingsadapter Inclusief wisselstroomadapter
Ingangsspanning 110V-240V AC
Ingangsstroom 0.3A
Uitgangsspanning 5 DC
Uitgangsstroom 2A
Polariteit pin midden Positief
Wat wordt er meegeleverd 1 - Meegeleverd USB-naar-HDMI of HDMI-via-IP converter
Universele voedingsadapter (US/UK/EU/AUS)
CD met drivers en software
Handleiding

Accessoires

Niet meer leverbaar
HDMIMM6

6 ft High Speed HDMI Cable – Ultra HD 4k x 2k HDMI Cable – HDMI to HDMI M/M

Create Ultra HD connections between your High Speed HDMI®-equipped devices

Uw prijs
€10,99 EUR excl. VAT
€13,30 EUR incl. VAT
Niet meer leverbaar
HDMIMM10

10 ft High Speed HDMI Cable - HDMI- M/M

Provides a high speed connection between HDMI®-enabled devices

Uw prijs
€16,99 EUR excl. VAT
€20,56 EUR incl. VAT
SVA5M3NEUA

Vervangende 5V DC voedingsadapter - 5 Volt, 3 Amp

Vervang uw zoekgeraakte of defecte voedingsadapter

Uw prijs
€21,99 EUR excl. VAT
€26,61 EUR incl. VAT

Drivers/Downloads

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Drivers:

Handleiding:

Software

Datasheet

Productondersteuning

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Veelgestelde vragen (FAQ)

Installatie

To get the highest quality signal from your source to your display when you use an HDMI extender, do the following:

  • Make sure that the HDMI versions of the source, extender, and destination are compatible. For example, if you require 3D support, make sure that all of the devices can support 3D over HDMI.

  • Use the least amount of adapters, splitters, or converters as possible. Each device that you use in your setup creates additional points of potential failure and creates more steps for an HDCP key to hop through, which may cause issues with older displays. For more information on HDCP, refer to the following FAQ: http://www.startech.com/faq/video_signal_converters_HDCP.

  • Use an HDMI extender that exceeds the requirements of the setup. For example, if you need to extend the signal 200 feet, it is best to use an extender capable of more than 200 feet.

  • Make sure that all of the CAT 5/6 runs are as straight as possible, with the least amount of coiling.

  • Make sure that all of the patches, wall jacks, and cables use the highest possible CAT specification, (for example, CAT 6), and were tested to conform to the standard.

  • Use patches, wall jacks, and cables with the same pin configuration. For more information on T568A versus T568B wiring, refer to the following FAQ: http://www.startech.com/faq/network_cables_a_vs_b_pinout.

  • Keep the cabling away from sources of high noise.

  • Make sure that you use adequate electrical grounding in your setup.

Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).

  1. Download the latest drivers from the StarTech.com website at http://www.startech.com/Support. The part number and product ID are on the product packaging.

Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. After the download is complete, right-click the zip folder that you downloaded, click Extract All, and complete the instructions.
  2. In the list of extracted files, right-click the Driver-Setup.exe file and click Run as Administrator.

Note: If the Run as Administrator option is not available, you might be trying to run the installer from within the zipped file. Complete the instructions in step 2 to extract the files.

  1. Complete the instructions to install the device drivers, and restart your computer when prompted to.

To install the USB Server software, complete the following:

  1. In the list of extracted files, open the Windows folder.
  2. In the App folder, right-click the USBServer_Setup file and click Run as Administrator.

Note: If the Run as Administrator option is not available, you might be trying to run the installer from within the zipped file. Complete the instructions above to extract the files.

  1. Complete the instructions to install the USB Server, and restart your computer when prompted to.

For information on configuring the USB Server software, refer to the following FAQ: http://www.startech.com/faq/ipusb2vga_ipusb2hd2_usb_server_software

Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).

  1. Download the latest drivers from the StarTech.com website at http://www.startech.com/Support. The part number and product ID are on the product packaging.

Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Documents and Settings\your_name\My Documents\Downloads).

  1. After the download is complete, right-click the zip folder that you downloaded, click Extract All, and complete the instructions.

  2. In the list of extracted files, double-click the Driver-Setup file.

  3. Complete the instructions to install the device drivers.

  4. When prompted to, restart your computer.

 

To install the USB Server, complete the following:

  1. In the list of extracted files, open the Windows folder.

  2. Navigate to the App folder.

  3. Double-click the USBServer_Setup file.

  4. Complete the instructions to install the USB Server.

  5. When prompted to, restart your computer.

For information on configuring the USB Server software, refer to the following FAQ: http://www.startech.com/faq/ipusb2vga_ipusb2hd2_usb_server_software

Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).

To install the USB Server software:

  1. Download the latest software package from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
  2. Select the appropriate folder for your operating system.
  3. Right-click Setup.exe
  4. Click Run as Administrator.

Note: If the Run as Administrator option is not available, you might be attempting to run the installer from within the zipped file. Extract the files using the instructions in Step 2.

  1. Follow the on-screen prompts to install the software and restart the computer when prompted.
  2. Your computer will automatically complete the software installation and your device should be ready to use.

Set up the software

Confirm that the extender is on the same network as your computer. If you are using a network with DHCP, you do not need to configure anything further.

If you are using an Ethernet cable to connect to the unit or you are using a network without DHCP, you need to change the IP address on your computer to the default IP network of the IP device server. Change the IP address of your system to 192.168.1.XXX, where XXX is a number between 1 and 49.

Note: The default IP address of the extender is 192.168.1.50 on the default subnet mask of 255.255.255.0.

USB Server software

Your extender is detected by the USB Server software when the software is launched.

Note: It may take a few minutes for the server to appear in the software.

When the extender appears in the list (for example, USB2HDMI), click either the display or media device associated with the server. Click on one of the devices and then click Connect Device.

When the USB Server software configuration is complete, the display and media devices are connected to your system as though the devices are installed locally. By default, Windows creates an extended desktop for the display, which you can reconfigure in the control panel.

Troubleshooting

Als hardwareversnelling in een van uw softprogramma's is ingeschakeld, kan dit het beheer van hulpbronnen verslechteren en de prestatie van uw USB-videoadapter beperken. Als u met dit probleem wordt geconfronteerd, moet u hardwareversnelling in het (de) betreffende programma('s) uitschakelen. 

Om hardwareversnelling in veel voorkomende applicaties en besturingssystemen uit te schakelen, moet u een van de volgende reeks stappen doorlopen, afhankelijk van het besturingssysteem dat u gebruikt.

Internet Explorer 9 en later

NB: Eerdere versies van Internet Explorer maakten geen gebruik van hardwareversnelling.

  1. Klik op de knop Start.
  2. Open het Configuratiescherm.
  3. Klik op Netwerk en Internet.
  4. Klik op Internetopties.
  5. Klik op het tabblad Geavanceerd.
  6. Ga naar scherm Versnelde grafische afbeeldingen.
  7. Kruis het Softwarerendering gebruiken in plaats van GPU-rendering aan.
  8. Klik op Toepassen.
  9. Start uw computer opnieuw.

Mozilla Firefox

  1. Open Firefox.
  2. Druk op Alt-toets.
  3. Klik op Gereedschap en Opties.
  4. Klik op de pictogram Geavanceerd.
  5. Klik op het tabblad Algemeen.
  6. Schakel onder Bladeren het selectievakje Hardwareversnelling gebruiken, indien beschikbaar uit.
  7. Klik op de knop OK .
  8. Start uw webbrowser opnieuw.

Google Chrome

  1. Open Google Chrome.
  2. Klik op het pictogram Opties (dit heeft drie horizontale lijnen).
  3. Klik op Instellingen.
  4. Klik op Geavanceerde instellingen weergeven.
  5. Blader naar de onderkant van het scherm en schakel het selectievakje Hardwareversnelling gebruiken, indien beschikbaar uit.
  6. Start uw webbrowser opnieuw.

Microsoft Office 2013 / 2010

  1. Open een willekeurig programma in Microsoft Office (bijv. Microsoft Word).
  2. Klik op het tabblad Bestand.
  3. Klik in het menu aan de linkerkant van het scherm op Opties.
  4. Klik op Geavanceerd.
  5. Schakel onder Weergave het selectievakje Grafische hardwareversnelling uitschakelen in.
  6. Sluit en start al uw Microsoft Office-programma's die u open had opnieuw.

Windows 10 / 8 

  1. Druk op de Windows-toets +X.
  2. Klik op Configuratiescherm.
  3. Klik op Persoonlijke instellingen.
  4. Selecteer een thema met hoog contrast.

Windows 7 / Vista

  1. Klik op de knop Start.
  2. Klik op Configuratiescherm.
  3. Klik op Persoonlijke instellingen.
  4. Kies een non-Aero thema. Idealiter zou u een basisthema en thema met hoog contrast kiezen.

Windows XP

  1. Klik op de knop Start.
  2. Open het Configuratiescherm.
  3. Selecteer Beeldscherm.
  4. Klik op het tabblad Instellingen.
  5. Klik op Geavanceerd.
  6. Klik op het tabblad Problemen oplossen.
  7. Verplaats de schuifregelaar Hardwareversnelling naar Geen.
  8. Start uw computer opnieuw.

When you troubleshoot issues with a video extender, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video and Ethernet cables

  • Video extender

  • Video source (such as a DVD player or computer)

  • Video destination (such as a monitor or projector)

Note: When you are testing setup components, you should avoid using video adapters. For example, if you are converting a VGA source to HDMI for use with an HDMI extender, you should use an HDMI source when you test the components.

To test your setup components, try the following:

  • Use the cable, video extender, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different cable, video extender, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the video extender from your setup and test to make sure that the video source and video destination work together without the video extender.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, extender, and destination all need to support the resolution that you are using.

If the device is not detected in the USB Server software, complete the following:

  • Make sure that the computer is on the same network as the device.
  • By default, the device uses DHCP. On a network that is plug-and-play, the device is assigned an IP address by the DHCP server and is detected by a computer that is on the same network as the device.
  • To troubleshoot the device, connect it directly to a computer on the 192.168.1 network. For more information about configuring the USB Server software, refer to the following FAQ: http://www.startech.com/faq/ipusb2vga_ipusb2hd2_usb_server_software.
  • If the network configuration of the device was changed, you cannot complete a hardware reset to put the unit back on 192.168.1.50. Instead, you need to obtain the static IP address from the person who modified the server.
  • Wait 5 minutes for the USB Server software to detect the device.
  • Move the device to a less congested network.

There may be several reasons that the display on the IP video extender is black. To determine the cause of the issue, try the following:

  • Make sure that the USB Server software was installed and configured properly, and that the displays are detected. For more information about configuring the USB Server software, refer to the following FAQ: http://www.startech.com/faq/ipusb2vga_ipusb2hd2_usb_server_software.
  • Make sure that the USB Server software detects the IP video extender. For more information about troubleshooting issues with the USB Server software, refer to the following FAQ: http://www.startech.com/faq/ipusb2vga_ipusb2hd2_loss_of_network_connection..
  • Confirm that the network equipment that you are using is capable of gigabit speeds.
  • In the control panel on your computer, make sure that a compatible resolution is being sent to the monitor.
  • Make sure that the display is set to the correct input. Some displays have multiple inputs that you can switch between. 
  • Make sure that the background is not black.

Voor uw aanschaf

You should only use video converters and extenders if it is absolutely necessary to do so. In many cases, most video converters and extenders are not necessary if you purchase the correct cable.

The following table lists the maximum length of cable for common video standards.

Video standard Maximum length
DisplayPort 50 ft. (15.2m)
HDMI 50 ft. (15.2m)
DVI 50 ft. (15.2m)
VGA 200 ft. (71m)

Note: StarTech.com offers cables longer than what is listed above, including active cables, which typically include built-in active signal boosters that allow for longer cables. Active cables are specifically designed to exceed the suggested maximum lengths and are tested at the listed specifications (for example, the maximum listed resolution).

Video adapters

Video adapters passively adapt a cable from one connector type to another. Video adapters do not change the signal type, or change the video standard.

Examples of common applications for adapters include the following:

  • DVI-I to VGA

  • RCA to BNC

  • Mini DisplayPort to DisplayPort

  • Couplers (female to female, or male to male)

Note: You can use a coupler to extend a cable for a short distance. However, each coupler that you use can introduce signal loss, which degrades the signal quality.

Video converters

Video converters actively process and change the signal type from one video standard and convert it to another standard. They are typically used to convert digital to analog and vice versa, but can be used to convert a digital signal to another digital video standard (for example, HDMI to DisplayPort).

Video converters work over short distances from the source to the destination: up to 15 feet or 3 meters.

Video extenders

Video extenders convert an input signal to a higher voltage for transmission over longer distances and then convert the input signal back to the original video standard. The input and the output signal will match on a video extender, as the same video standard is maintained end-to-end. If a cable is extended with adapters or converters, the signal quality degrades.

Note: For more information on using a video adapter or converter with a video extender, see the following FAQ: http://www.startech.com/faq/video_signal_converters_convert_then_extend.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Uitvoering en specificaties van het product zijn zonder aankondiging vatbaar voor wijzigingen.
Terug naar boven
Wacht...