Productcode: SDI2HD
Met de SDI2HD 3G SDI-naar-HDMI-converter kunt u een 3G SDI-videosignaal omzetten in een HDMI-video-uitgang. De adapter heeft een geïntegreerde 3G SDI daisy chain-poort, waardoor u de SDI-bron met nog eens 230 m kunt verlengen via een standaard coaxiale kabel, voor grootschalige HD-SDI video-uitzendingen.
Om perfecte high-definition videokwaliteit te behouden, ondersteunt de HD-SDI converter resoluties tot 1080p, waardoor u HDMI in SDI kunt omzetten zonderde videokwaliteit te moeten opofferen.
Voor een probleemloze installatie biedt de HDMI-naar-SDI-converter een plug & play-oplossing inclusief vooraf bevestigde montagebeugels en zonder dat software of stuurprogramma's moeten worden geïnstalleerd.
De SDI2HD wordt gedekt door een 2-jarige garantie en gratis levenslange technische ondersteuning van StarTech.com.
Warranty Information | Warranty | 2 Years |
---|---|---|
Connector(en) | 1 - Connector A | SDI (BNC) |
1 - Type connector(en) | SDI (BNC) | |
1 - Connector B | HDMI (19-polig) | |
Fysieke eigenschappen | Gewicht product | 207,0 g [7,3 oz] |
Kleur | Zwart | |
Type behuizing | Staal | |
Lengte product | 100,0 mm [3,9 in] | |
Breedte product | 70,0 mm [2,8 in] | |
Hoogte product | 25,0 mm [1,0 in] | |
Gebruiksomgeving | Bedrijfstemperatuur | 0°C to 70°C (32°F to 158°F) |
Opslagtemperatuur | -10°C to 80°C (14°F to 176°F) | |
Vochtigheid | 5% tot 90 % RV (niet-condenserend) | |
Hardware | Active or Passive Adapter | Actief |
AV-ingang | SDI (BNC) | |
AV-uitgang | SDI (BNC) | |
HDMI | ||
Poorten | 1 | |
Bekabeling | Coaxiaal | |
Audio | Ja | |
Rack-monteerbaar | Ja | |
Chipsetcode | Gennum - GV7600 | |
Op elkaar aansluitbaar | Ja | |
Prestaties | Maximale overdrachtsnelheid | 2.97 Gbps |
Maximale kabellengte | 230 m [754,4 ft] | |
Max. afstand | 230 m / 755 ft | |
Maximale digitale resoluties | 1080p | |
Ondersteunde resoluties | 1920x1080 (1080p) @ 24, 25, 30, 50 & 60 FPS 1920x1080 (1080i) @ 50 & 60 FPS 1280x720 (720p) @ 24, 25, 30, 50 & 60 FPS |
|
Ondersteuning breedbeeld: | Ja | |
Audiospecificaties | 8-kanaals digitale audio @ 48 kHz | |
Algemene specificaties | Ondersteunt 525i & 625i SD D1 formaat Ondersteunt 8-bits of 10-bit component digitale video: RGB of YCbCr 4:4:4 bemonsterd YCbCr 4:2:2 of 4:2:0 bemonsterd |
|
Verpakkingsinformatie | Package Height | 52,0 mm [2,0 in] |
Package Length | 15,2 cm [6,0 in] | |
Verzendgewicht (verpakt) | 492,0 g [17,4 oz] | |
Package Width | 21,5 cm [8,5 in] | |
Voeding | Inclusief voedingsadapter | Inclusief wisselstroomadapter |
Ingangsspanning | 100 - 240 AC | |
Ingangsstroom | 0.5 A | |
Uitgangsspanning | 5 DC | |
Uitgangsstroom | 2 A | |
Polariteit pin midden | Positief | |
Stekkertype | M | |
Vermogensopname | 10 | |
Wat wordt er meegeleverd | 1 - Meegeleverd | SDI-naar-HDMI-adapter |
Montagebeugel (bevestigd) | ||
Universele voedingsadapter (N-A/VK/EU) | ||
Handleiding |
Maak Ultra HD-verbindingen tussen uw High Speed HDMI®-apparaten
Vervang uw zoekgeraakte of defecte voedingsadapter
Wij staan altijd klaar om al uw vragen te beantwoorden.
Chat Live (opens in new window)Wij staan altijd klaar om al uw vragen te beantwoorden.
Chat Live (opens in new window)When you troubleshoot issues with a video adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Video cables
Video adapter
Video source (such as a DVD player or computer)
Video destination (such as a monitor or projector)
To test your setup components, try the following:
Use the cable, video adapter, video source, and video destination in another setup to see if the problem is with the components or the setup.
Use a different cable, video adapter, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cables, it is recommended that you do the following:
Test each cable individually.
Use short cables when you are testing.
When you test the video source and video destination, it is recommended that you do the following:
Remove the video adapter from your setup and test to make sure that the video source and video destination work together without the video adapter.
Test to make sure that the video source and video destination work together at the resolution that you want to use.
Note: In order for your setup to work properly, the video source, adapter, and destination all need to support the resolution that you are using.