Niet meer leverbaar

HDMI-naar-CAT5-repeater voor ST12MHDDC – 1080p / 1920x1080

Ringnetwerk ST12MHDDC HDMI®-output voor extra schermen

Productcode: ST12MHDDCRP

  • EDID-emulatie garandeert maximale resolutie en compatibiliteit met uw scherm of projector
  • High-definition ondersteuning van resoluties tot 1080p (1920x1080)
  • 7.1 surround sound audio-ondersteuning

De ST12MHDDCRP HDMI®-naar-CAT5-repeater werkt samen met de ST12MHDDC HDMI-extenderset om extra schermen toe te voegen en het HDMI-over-Cat 5/6-signaal te verlengen. Met 2 RJ45-uitgangen per unit kunt u met elke repeater een scherm toevoegen en het signaal ook via een daisy chain aansluiten op 2 extra ST12MHDDCRP-repeaters (apart verkrijgbaar) tot max. 100 meter op elk niveau.

Extra repeaters kunnen altijd worden toegevoegd, tot maximaal 30 zendniveaus, aan meer dan 100 schermen, waardoor een zeer schaalbare installatie mogelijk wordt die kan worden gebruikt met de bestaande netwerkkabel voor een voordelige en flexibele uitbreiding. Elke repeater wordt geleverd met montagemiddelen voor een nette en professionele installatie. Bovendien zijn, omdat het HDMI-signaal via de standaard Cat5/Cat6 Ethernet-kabel met RJ45 connectors wordt uitgebreid, geen eigen kabels meer nodig, waardoor zowel de kosten als de aanleg van speciale kabels vervallen.

De HDMI-over-UTP-extender is ideaal voor high-definition applicaties en ondersteunt een videoresolutie van 1080p, 7.1 digitale audio en beschikt over ingebouwde EDID-schermemulatie, die een natieve resolutie en maximale compatibiliteit met uw scherm of projector garandeert, voor een gemakkelijke plug & play-installatie.

Gedekt door een StarTech.com tweejarige garantie en gratis levenslange technische ondersteuning.

Toepassingen

  • Kies een optimale locatie voor uw demonstratie op beurzen en in conferentiezalen
  • Plaats het scherm op een gemakkelijke kijkplaats, terwijl het HDMI-bronapparaat elders in een aparte, beveiligde omgeving wordt geplaatst
  • Geef hetzelfde HDMI audio-/videosignaal weer op max. 100 schermen, voor grootschalige digitale reclameapplicaties
  • Ideaal voor videoconferencing bij vergaderingen en in kantoren

Het voordeel van StarTech.com

  • Voeg op elk gewenst moment een scherm toe zonder de hardware te hoeven veranderen
  • Kostenefficiënte HDMI-verlenging met generieke kabels zonder signaalverslechtering, zelfs op 100 m met Cat5 of Cat6

Partnernummers

  • Ingram Micro Belgium 2413307
  • UPC 065030849487

Specificaties

Warranty Information Warranty 2 Years
Connector(en) 1 - Connectoren lokale eenheid HDMI (19-polig)
2 - Aansluitingen externe eenheid RJ-45
Fysieke eigenschappen Kleur Zwart
Type behuizing Aluminium en kunststof
Lengte product 12,8 cm [5,0 in]
Breedte product 75 mm [3,0 in]
Hoogte product 24 mm [0,9 in]
Gewicht product 313 g [11,0 oz]
Gebruiksomgeving Bedrijfstemperatuur 0°C to 40°C (32°F to 104°F)
Opslagtemperatuur -10°C to 60°C (14°F to 140°F)
Vochtigheid 0% - 80 %
Hardware Poorten 1
Bekabeling Cat5 UTP
Audio Ja
Rack-monteerbaar Ja
Op elkaar aansluitbaar Ja
Indicatoren 1 - LED-indicatoren Power (rood)
Status (groen)
Prestaties Max. afstand 100 m / 330 ft
Maximale digitale resoluties 1920x1200 @60Hz
Ondersteunde resoluties 1920 x 1200
1920 x 1080
1600 x 1200
Ondersteuning breedbeeld: Ja
Audiospecificaties 7.1 surround sound
Verpakkingsinformatie Package Height 63 mm [2,5 in]
Package Length 16,8 cm [6,6 in]
Package Width 14,3 cm [5,6 in]
Verzendgewicht (verpakt) 575 g [20,3 oz]
Voeding Inclusief voedingsadapter Inclusief wisselstroomadapter
Ingangsspanning 100 - 240 AC
Ingangsstroom 0.4 A
Uitgangsspanning 5 DC
Uitgangsstroom 2 A
Polariteit pin midden Positief
Stekkertype M
Wat wordt er meegeleverd 1 - Meegeleverd HDMI-repeater
Voetkussenset
2 - Meegeleverd Voedingsadapter
1 - Meegeleverd Handleiding

Accessoires

Niet meer leverbaar
ST12MHDDC

HDMI-naar-CAT5 extender met optionele repeaterfunctie en audio – 1080p / 1920x1080

Breid HDMI over CAT5/6-bekabeling uit; ringnetwerk naar meer dan 100 schermen met extra repeater-eenheden

Uw prijs
€404,99 EUR excl. VAT
€490,04 EUR incl. VAT
SVA5M3NEUA

Vervangende 5V DC voedingsadapter - 5 Volt, 3 Amp

Vervang uw zoekgeraakte of defecte voedingsadapter

Uw prijs
€21,99 EUR excl. VAT
€26,61 EUR incl. VAT
Niet meer leverbaar
HDMIMM6

6 ft High Speed HDMI Cable – Ultra HD 4k x 2k HDMI Cable – HDMI to HDMI M/M

Create Ultra HD connections between your High Speed HDMI®-equipped devices

Uw prijs
€10,99 EUR excl. VAT
€13,30 EUR incl. VAT
Niet meer leverbaar
HDMIMM10

10 ft High Speed HDMI Cable - HDMI- M/M

Provides a high speed connection between HDMI®-enabled devices

Uw prijs
€16,99 EUR excl. VAT
€20,56 EUR incl. VAT

Drivers/Downloads

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Handleiding:

Datasheet

Productondersteuning

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Veelgestelde vragen (FAQ)

Installatie

To get the highest quality signal from your source to your display when you use an HDMI extender, do the following:

  • Make sure that the HDMI versions of the source, extender, and destination are compatible. For example, if you require 3D support, make sure that all of the devices can support 3D over HDMI.

  • Use the least amount of adapters, splitters, or converters as possible. Each device that you use in your setup creates additional points of potential failure and creates more steps for an HDCP key to hop through, which may cause issues with older displays. For more information on HDCP, refer to the following FAQ: http://www.startech.com/faq/video_signal_converters_HDCP.

  • Use an HDMI extender that exceeds the requirements of the setup. For example, if you need to extend the signal 200 feet, it is best to use an extender capable of more than 200 feet.

  • Make sure that all of the CAT 5/6 runs are as straight as possible, with the least amount of coiling.

  • Make sure that all of the patches, wall jacks, and cables use the highest possible CAT specification, (for example, CAT 6), and were tested to conform to the standard.

  • Use patches, wall jacks, and cables with the same pin configuration. For more information on T568A versus T568B wiring, refer to the following FAQ: http://www.startech.com/faq/network_cables_a_vs_b_pinout.

  • Keep the cabling away from sources of high noise.

  • Make sure that you use adequate electrical grounding in your setup.

Troubleshooting

When you troubleshoot issues with a video extender, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video and Ethernet cables

  • Video extender

  • Video source (such as a DVD player or computer)

  • Video destination (such as a monitor or projector)

Note: When you are testing setup components, you should avoid using video adapters. For example, if you are converting a VGA source to HDMI for use with an HDMI extender, you should use an HDMI source when you test the components.

To test your setup components, try the following:

  • Use the cable, video extender, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different cable, video extender, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the video extender from your setup and test to make sure that the video source and video destination work together without the video extender.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, extender, and destination all need to support the resolution that you are using.

Voor uw aanschaf

You should only use video converters and extenders if it is absolutely necessary to do so. In many cases, most video converters and extenders are not necessary if you purchase the correct cable.

The following table lists the maximum length of cable for common video standards.

Video standard Maximum length
DisplayPort 50 ft. (15.2m)
HDMI 50 ft. (15.2m)
DVI 50 ft. (15.2m)
VGA 200 ft. (71m)

Note: StarTech.com offers cables longer than what is listed above, including active cables, which typically include built-in active signal boosters that allow for longer cables. Active cables are specifically designed to exceed the suggested maximum lengths and are tested at the listed specifications (for example, the maximum listed resolution).

Video adapters

Video adapters passively adapt a cable from one connector type to another. Video adapters do not change the signal type, or change the video standard.

Examples of common applications for adapters include the following:

  • DVI-I to VGA

  • RCA to BNC

  • Mini DisplayPort to DisplayPort

  • Couplers (female to female, or male to male)

Note: You can use a coupler to extend a cable for a short distance. However, each coupler that you use can introduce signal loss, which degrades the signal quality.

Video converters

Video converters actively process and change the signal type from one video standard and convert it to another standard. They are typically used to convert digital to analog and vice versa, but can be used to convert a digital signal to another digital video standard (for example, HDMI to DisplayPort).

Video converters work over short distances from the source to the destination: up to 15 feet or 3 meters.

Video extenders

Video extenders convert an input signal to a higher voltage for transmission over longer distances and then convert the input signal back to the original video standard. The input and the output signal will match on a video extender, as the same video standard is maintained end-to-end. If a cable is extended with adapters or converters, the signal quality degrades.

Note: For more information on using a video adapter or converter with a video extender, see the following FAQ: http://www.startech.com/faq/video_signal_converters_convert_then_extend.

If you need to use a video extender with a video adapter or converter, you should position the adapter or converter as close to the video source as possible. For example, if you need to take a VGA signal from a computer and send it 200 feet to an HDMI® projector, you should convert the signal from VGA to HDMI and use an HDMI extender.

Note: For more information on when to use cables or extenders, see the following FAQ: http://www.startech.com/faq/video_signal_converters_when_to_convert.

Yes, this video extender works with set-top boxes, provided the set-top box meets the following requirements:

  • The set-top box must be High-bandwidth Digital Content Protection (HDCP) compliant.
  • The set-top box must support devices being connected between the video source and display. If the set-top box requires a direct cable connection between the video source and display, it won't work with this video extender.

This device outputs HDMI video signals. If you have a display or video destination that uses another type of video connection, there are ways that you can convert the video signal or connection. These options are outlined below and organized by the target connection.

HDCP

When you consider whether to convert an HDMI video signal to another connection type, it is important to know if the media that is being converted from the HDMI video connection is protected by High-bandwidth Digital Content Protection (HDCP). If the media is protected by HDCP, you cannot convert to analog video connections because they do not support HDCP. You may experience this issue when you use devices like Blu-ray players, DVD players, and certain gaming consoles.

Target connection Conversion
VGA HDMI to VGA: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=VGA.
DVI

HDMI to DVI: https://www.startech.com/Cables/Audio-Video/HDMI/HDMI-to-DVI/.

DisplayPort HDMI to DisplayPort: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=DisplayPort.

 

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Uitvoering en specificaties van het product zijn zonder aankondiging vatbaar voor wijzigingen.
Terug naar boven
Wacht...