USB 3.0 opname apparaat voor High-Performance VGA Video - 1080p 60fps - Aluminium

Neem VGA-video op uw computer op, met geïntegreerde 3,5 mm audio, met een resolutie van 1080p 60 f/s

Productcode: USB32VGCAPRO

  • Naadloze beeldkwaliteit met USB 3.0 bandbreedte waardoor u 1080p video kunt opnemen met 60 f/s
  • Brede ondersteuning van afspeelapparatuur dankzij gecodeerde videobestanden
  • Opname van onbewerkte video zonder kwaliteitsverlies garandeert compatibiliteit met DirectShow™ onder Windows
Uw prijs
€323,99 EUR excl. VAT
€392,03 EUR incl. VAT

Dit VGA naar USB video-opnameapparaat neemt high-definition VGA video op uw computer op. Dankzij de aluminium behuizing is dit apparaat sterk genoeg voor opnamen vanaf een vaste plaats of mobiele opnamen. Hij is uitgerust met een aparte 3,5 mm audio-ingang voor begeleidende audio of voice-overs, en een VGA pass-through poort voor aansluiting op een scherm zodat u de video tijdens de opname kunt bekijken. 

Neem HD-video op met 1080p 60 f/s

Neem 1080p video op met 60 f/s (frames per seconde), zodat u deze kunt delen, opslaan of bewerken. Sla opnamen van beveiligingsapparatuur, controlekamers, medische of andere industriële VGA-apparaten direct op uw computer op.

Eenvoudige video-opnamen op Windows en Mac

De meegeleverde software vereenvoudigt de opname. Dankzij een breed geaccepteerde code kunnen in StreamCatcher™ opgeslagen video's worden afgespeeld op elke videospeler, zonder dat een conversie of bewerking nodig is.

Live streamen onder Windows

Met de meegeleverde software kunt u, onder Windows, uw video live op het internet afspelen, via Twitch™ of andere externe video streaming platforms.

Compatibiliteit met DirectShow onder Windows

Met dit opnameapparaat bent u niet gebonden aan de meegeleverde software. U kunt onbewerkte video zonder kwaliteitsverlies opnemen met elke externe DirectShow™-software zoals Open Broadcaster Software (OBS).

De USB32VGCAPRO wordt gedekt door een 2-jarige garantie en gratis levenslange technische ondersteuning van StarTech.com.

Toepassingen

  • Neem video op voor trainings- en opleidingsdoeleinden van technologie die VGA weergeeft
  • Neem onbewerkte video op met uw favoriete, met DirectShow compatibele software
  • Bij uitstek geschikt voor het opnemen van output vanaf uw pc, server of POS-station, tijdens het maken van softwaretrainings- en opleidingsvideo's.
  • Voeg uw eigen onafhankelijke audiobron toe voor voice-over commentaar
  • Converteer analoge naar digitale video bij professionele video-archiverings applicaties

Partnernummers

  • UPC 065030864848

Compatibility

  • Windows 8 logo
  • Windows 10 logo
  • Mac OS X El Capitan (10.11) logo
  • macOS Sierra (10.12) logo
  • macOS High Sierra (10.13) logo
  • macOS Mojave (10.14) logo
Windows® 7, 8, 8.1, 10
MacOS® 10.11 to 10.14

Specificaties

Warranty Information Warranty 2 Years
Connector(en) Connector A 1 - VGA (15-polig, D-Sub met hoge dichtheid)
Connector B 1 - USB Type-B (9-polig) USB 3.0
Connector A 1 - 3,5 mm mini-jack (3 standen)
Fysieke eigenschappen Lengte product 9,2 cm [3,6 in]
Breedte product 61 mm [2,4 in]
Hoogte product 2,4 cm [0,9 in]
Gewicht product 100 g [3,5 oz]
Gebruiksomgeving Bedrijfstemperatuur 0°C to 40°C (32°F to 104°F)
Opslagtemperatuur -5°C to 40°C (23°F to 105°F)
Vochtigheid 20% tot 80% (niet-condenserend)
Hardware AV-ingang VGA
AV-uitgang USB
Audio Ja
Industriestandaarden NTSC, PAL-M, PAL-60, PA
Video Encoding: MPEG4/H.264
DirectShow Compatible
Chipsetcode Mstar - MST3363CNK-170
Prestaties Maximale analoge resoluties 1920 x 1080 60 FPS
Ondersteunde resoluties 1920 x 1080, 1280 x 720, 1024 x 768, 800 x 600
Ondersteuning breedbeeld: Ja
Audiospecificaties 2-kanaals stereo audio
MTBF 2.543.711 uur
Software Besturingssystemen Windows® 7, 8, 8.1, 10
MacOS® 10.11 to 10.14
Speciale opmerkingen / vereisten Notitie This video capture device requires a USB 3.0 port (or higher). The video capture device does not work with USB 2.0 ports (or lower).
Verpakkingsinformatie Package Height 54 mm [2,1 in]
Package Length 21,7 cm [8,5 in]
Verzendgewicht (verpakt) 0,4 kg [0,9 lb]
Package Width 15,2 cm [6,0 in]
Voeding Inclusief voedingsadapter Gevoed via USB
Wat wordt er meegeleverd Meegeleverd 1 - USB 3.0 opnameapparaat voor VGA video
1 - USB 3.0-kabel
1 - 1 m VGA-kabel
1 - Verkorte handleiding
1 - 2 m USB-C naar USB-B-kabel

Accessoires

MXT101MMHQ

1,8m Coaxiale Hoge Resolutie VGA Video Monitorkabel - HD15 naar HD15 M/M

Sluit uw VGA-monitor aan met een verbinding van de hoogst mogelijke kwaliteit

Uw prijs
€8,99 EUR excl. VAT
€10,88 EUR incl. VAT
MU6MMS

1,8 m slanke 3.5mm Stereo Audio kabel - M/M

Connect an iPhone® or other MP3 player to a car stereo

Uw prijs
€2,99 EUR excl. VAT
€3,62 EUR incl. VAT
MU10MMS

3 m slanke 3.5mm Stereo Audio kabel - M/M

3m slanke 3,5mm Stereo Aux kabel

Uw prijs
€3,99 EUR excl. VAT
€4,83 EUR incl. VAT
MU15MMS

4,5 m slanke 3.5mm Stereo Audio kabel - M/M

Easily connect an iPod or other MP3 player to your stereo

Uw prijs
€4,99 EUR excl. VAT
€6,04 EUR incl. VAT
USB3SAB10

10 ft SuperSpeed USB 3.0 Cable A to B - M/M

Sluit uw externe apparaten aan en zet gegevens over 10x sneller dan met USB 2.0

Uw prijs
€11,99 EUR excl. VAT
€14,51 EUR incl. VAT
MU3MMS

90cm Slanke 3,5mm Stereo Audiokabel - M/M

Sluit gemakkelijk een iPod of andere MP3-speler aan op een autoradio

Uw prijs
€2,99 EUR excl. VAT
€3,62 EUR incl. VAT

Drivers/Downloads

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Software

Datasheet

Productondersteuning

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Veelgestelde vragen (FAQ)

Troubleshooting

When you troubleshoot issues with a video capture device, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • Video source

  • Video capture device

To test your setup components, try the following:

  • Use the video cables, source, and capture device in another setup to see if the problem is with the components or the setup.

  • Use a different video cable, source, and capture device in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video cables and source with the video capture device, make sure that the following is true:

  • Other video destinations work with the same video source. For more information, visit http://www.startech.com/faq/video_capture_cards_source_compatibility.

  • Adapters and extenders are kept to a minimum.

  • The video source is not copyright protected (for example, HDCP).

  • The video standard (for example, NTSC, PAL, HDMI, and so on) of the video source matches the Technical Specifications of the video capture device.

To check if the video capture device is detected in Windows®, complete the following:

  1. Press the Windows key + R, type devmgmt.msc, and press Enter to open Device Manager. Check to see if your device is listed under Sound, video and game controllers.

  2. Do one of the following:

When you test the video capture device on your computer, make sure that the driver and capture software is installed on your system for your adapter. Some cards may be able to support third party software, however, support is limited. For more information, visit https://www.startech.com/faq/video-capture-cards-third-party-software.

Note: The USB3HDCAP requires a compatible USB 3.0 card.

Before you begin to troubleshoot StreamCatcher, make sure that you have tried to troubleshoot the video capture device by referring to the following FAQ: www.startech.com/faq/video_capture_cards_general_troubleshooting.

If you are unable to display or record video, complete the following in Device Settings:

  • Make sure that the input that you are trying to record or display is selected in Video Source.

  • Make sure that the video standard is set correctly for your region (for example, NTSC for North America, PAL for Europe, and so on).

  • If your audio is not working, make sure that you selected the correct audio source in Audio Source.

If the recorded video is poor quality, navigate to Record Settings and change the following settings to best suit your setup:

  • Record Resolution

    • High
    • Low
  • Record Mode

    • VBR (Variable Bit Rate) adjusts the bit rate based on the complexity of the video and saves space.
    • CBR (Constant Bit Rate) maintains the same bit rate regardless of complexity and offers the best recording quality.
  • Record Quality

    • The VBR quality level increases from 1 to 10, with 10 being the highest quality level.
    • The CBR quality level goes from 2 Mbps to 16 Mbps, with 16 Mbps being the highest quality level. 

If you are experiencing any issues with streaming, make sure that the following is true:

  • The target IP address is correct.

  • The correct protocol is selected.

  • You tested a low resolution and low bit rate to get the best performance.

Hoe gaat u te werk

  1. Open a web browser and navigate to https://www.youtube.com/live_dashboard.
  2. Under Encoder setup, copy the Server URL from the bottom of the page.
  3. Add a slash mark and your stream name or key to the end of the URL (for example, rtmp://a.rtmp.youtube.com/live2/USERACCOUNT-8033.d1fj-m8d7-ds8y-41qj).
  4. Copy the RMTP link (you will need it to complete step 8).
  5. Open Stream Catcher.
  6. Click Settings Streaming Settings.
  7. In the Streaming Protocol Type drop-down menu, click RTMP.
  8. In the Streaming Public URL field, paste the link that you copied in step 4.
  9. On the Stream Catcher home page, click the blue record icon.

Voor uw aanschaf

You can use a video capture device to capture or record an audio and video output signal to a connected computer.  You can use USB, ExpressCard, or PCI Express technology to connect a video capture device to a computer system.  StarTech.com has video capture devices that can capture audio and video from sources such as HDMI, DVI, VGA, S-Video, component, or composite.  The captured signals are usually recorded with software that is included with the video capture device.  Some software will also stream the captured signals online.

Select a capture device that features the audio and video connections you want to use.  These can be identified on the product page, under the Technical Specifications tab.  Whenever possible, you should avoid using adapters or converters with video capture devices as they can cause issues or negatively impact the quality of the audio or video signals being captured.

When looking at a video capture device that requires software to use, it is important to consider the operating system you want to use it on.  You can find this on the product page under the Technical Specifications tab, which only lists supported operating systems.

Consider what resolution and refresh rate you require.  You can find the supported resolutions and refresh rates on the product page, under the Technical Specifications tab in the Performance section. 

Video capture device usually use drivers and software to record audio and video.  Both the drivers and the software can be found on the product page under the Support tab.  Different software will have different features so it’s a good idea to review the software to make sure it is a good fit for your intended usage.  You can do so by looking at the manual for the device, also located on the Support tab.  StarTech.com only supports the software included with the video capture device. 

HDCP stands for High-Bandwidth Digital Content Protection.  This system protects high definition video from being intercepted, modified, or recorded between the source and the display.  All StarTech.com devices adhere to the HDCP standard, so they do not record HDCP-protected content.  HDCP content that is being blocked often appears as a blank screen or a screen with an HDCP error shown on it.

Certain video capture devices allow you to stream video feeds online with streaming platform such as YouTube.  For more information, review the product manual or watch our video on this subject.  You can find a link to the video in the description.  If at this point you have further questions about a Startech.com video capture device contact our technical support team for further assistance. 

Although you may be able to plug in all of the connectors used for video standards associated with video capture cards/cables, you may still encounter issues that may prevent the video from being captured correctly.

About copyright protection

Some video sources implement copyright protection when you are plugging into a non-display device. Examples of copyright protection include the following:

  • High Definition Content Protection (HDCP). This type of copyright protection is included with DVI and HDMI® and can appear as a video error or blank screen. HDCP may also appear on the screen.

  • Analogue Content Protection (ACP). This type of copyright protection is included with analogue video (for example, composite, s-video, or component). ACP can appear as a brightness pulsing up and down.

Copyright protection cannot legally be bypassed, and StarTech.com does not offer any products that do so.

Using video adapters

It is possible to passively convert video signals to different connector types, but the video standards will not always match between the video source and video destination. You may need to actively convert from one video type to another to ensure that the correct conversion is being made. When a passive converter is not available, most video standards can be converted with active converters.

Examples of incompatible passive conversions include the following:

  • VGA source to composite or component (RCA) video, or composite or component (RCA) video to VGA.
  • Composite (RCA) source to s-video.
  • VGA to DVI-D and DVI-D to VGA.

Note: S-video to composite can be passively converted. DVI-I/DVI-A and VGA can be used bidirectionally.

About output resolution

If your video source has the ability to change resolutions (for example, a computer), it may be possible to send an incompatible resolution. To verify that the correct resolution is being used, navigate to www.StarTech.com and click the Technical Specifications tab for your product. Make note of the Industry Standards and Maximum Resolution specifications.

In the operating system's display management, you can adjust your video source to match or go below the maximum resolution and if possible, the refresh rate of your capture card.

Due to High-bandwidth Digital Content Protection (HDCP), it is not possible to record from certain gaming consoles. HDCP content (for example, movies) are protected, but the console itself may or may not have permanent HDCP enabled on the HDMI output.

For more information about consoles and their permanent HDCP enforcement, consult the following table:

Console Permanent HDCP

PlayStation 3

Yes
PlayStation 4

Optional. You can change the settings in the menu.

Wii U

No

XBox 360

No
XBox One No

You can use a video capture card with consoles that do not have permanent HDCP enabled.

Certain StarTech.com video capture cards are compatible with DirectShow and will work with many third-party video capture applications that are compatible with DirectShow. For more information on DirectShow compatible video capture cards, refer to the following FAQ: https://www.startech.com/faq/video-capture-cards-directshow.

Although third-party software might work with this video capture card, StarTech.com does not officially support or endorse the use of third-party applications.

This video capture card uses a DirectShow compatible driver and can be used with many third-party video capture applications. The driver for your video capture card still needs to be installed. You can find the driver by entering the product ID at http://www.startech.com/Support.

StarTech.com does not officially support or endorse the use of third-party applications. Any use of applications not provided by StarTech.com with our hardware must be independently supported.

Yes, if you use this capture card with third party software, it is possible to turn your video camcorder into a webcam.

Although third-party software might work with this video capture card, StarTech.com does not officially support or endorse the use of third-party applications.

This video capture card cannot record from more than one input at the same time.  

Note: Although the USB2HDCAPS can be connected to multiple computers on the same network, only one device can capture video at a time.

 

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Uitvoering en specificaties van het product zijn zonder aankondiging vatbaar voor wijzigingen.
Terug naar boven