Productcode: 25SAT22MSAT
Vergroot uw systeemprestatie enorm door toevoeging van een dubbele mSATA SSD RAID array aan elke 2,5 inch SATA HDD-applicatie met de 25SAT22MSAT mSATA-naar-SATA-adapter.
Benut het volle vermogen van uw SATA III controller, waarbij mSATA SSD's uw datatransmissieknelpunt verminderen met bestandstransmissiesnelheden tot 6 Gbps. mSATA SSDs besparen u ook geld door verlaging van het stroomverbruik van uw normale platterschijven.
U kunt een grotere SSD-capaciteit, of dataredundantie, bereiken met de dubbele SSD controller die meerdere RAID-modi (RAID 0, 1, BIG) ondersteunt. De SSD-adapter ondersteunt ook niet-RAID gebruik (JBOD) wanneer het wordt gecombineerd met een poortvermenigvuldigende SATA controller, zodat beide schijven onafhankelijk van elkaar kunnen worden gebruikt.
Bescherm de gezondheid van uw schijf met een open-frame design, waardoor maximale warmteafvoer wordt gegarandeerd.
De 25SAT22MSAT wordt gedekt door een 2-jarige garantie en gratis levenslange technische ondersteuning van StarTech.com.
Warranty Information | Warranty | 2 Years |
---|---|---|
Connector(en) | 2 - Schijfaansluitingen | mSATA (52-polig, Mini SATA) |
1 - Hostaansluitingen | SATA data & voeding combinatie (7+15-polig) | |
Fysieke eigenschappen | Gewicht product | 39 g [1.4 oz] |
Type behuizing | Staal, Aluminium en Kunststof | |
Lengte product | 97 mm [3.8 in] | |
Breedte product | 70 mm [2.8 in] | |
Hoogte product | 7 mm [0.3 in] | |
Gebruiksomgeving | Bedrijfstemperatuur | -40°C to 85°C (-40°F to 185°F) |
Hardware | Interface | SATA |
Aantal stations | 2 | |
Schijfgrootte | mSATA (Full Size & Half Size) | |
Schijftype | mSATA (Mini SATA) | |
Schijfinstallatie | Vast | |
Chipsetcode | JMicron - JMS562 | |
Indicatoren | 1 - LED-indicatoren | Schijfnr. 1 activiteit |
Schijfnr. 1 storing | ||
Schijfnr. 2 activiteit | ||
Schijfnr. 2 storing | ||
Prestaties | Maximale overdrachtsnelheid | 6 Gbit/s |
Type en snelheid | SATA III (6 Gbps) | |
Port-multiplier | Ja | |
RAID | Ja | |
Ondersteunde RAID-niveaus | BIG (span of lineair) | |
JBOD - (Just a Bunch of Disks) | ||
RAID 0 (stripe) | ||
RAID 1 (mirror) | ||
Hot-swappable | Nee | |
MTBF | 5,101,299 Hours | |
Software | Besturingssystemen | Onafhankelijk van besturingssysteem; Geen software of drivers nodig |
Verpakkingsinformatie | Package Height | 32 mm [1.3 in] |
Package Length | 14.5 cm [5.7 in] | |
Verzendgewicht (verpakt) | 107 g [3.8 oz] | |
Package Width | 17.4 cm [6.9 in] | |
Wat wordt er meegeleverd | 1 - Meegeleverd | Dubbele mSATA naar 2,5 inch SATA-adapter |
Set montageschroeven | ||
Installatiehandleiding |
Vergrendelbare SATA-aansluitingen voor een betrouwbare installatie van harde schijven
Deze hoogwaardige SATA-kabel is ontworpen voor het aansluiten van SATA-schijven zelfs in kleine ruimtes.
Power your Internal SATA hard drive from an LP4 connector on your Power Supply
Deze hoogwaardige SATA-kabel is ontworpen voor het aansluiten van SATA-schijven zelfs in kleine ruimtes.
Veilig vergrendelbare SATA-kabel voor nieuwe moederborden en SATA harde schijven
Breng een rechtshoekige verbinding met uw SATA-schijf tot stand, voor installatie in smalle plekken
Breng een rechtshoekige verbinding met uw SATA-schijf tot stand, voor installatie in smalle plekken
Sluit uw SATA-schijf aan onder een hoek naar links voor installatie in krappe ruimtes
Voed twee SATA-schijven via een enkele LP4-voedingsconnector
Sluit een IDE harde schijf aan op een SATA-voedingsconnector
Sluit uw SATA-schijf aan onder een hoek naar rechts voor installatie in krappe ruimtes
Sluit uw SATA-schijf aan onder een hoek naar links voor installatie in krappe ruimtes
Deze hoogwaardige SATA-kabel is ontworpen voor het aansluiten van SATA-schijven zelfs in kleine ruimtes.
Sluit uw SATA-schijf aan onder een hoek naar rechts voor installatie in krappe ruimtes
Breng een linkshoekige verbinding met uw SATA-schijf tot stand, voor installatie in smalle plekken
Monteer een 2,5 inch harde schijf in een desktopcomputer met een beschikbare 3,5 inch bay
Monteer twee 2,5 inch SATA SSD's/HDD's in één 3,5 inch drive bay
Voeg twee 2,5 inch SATA harde schijven toe aan een enkele 3,5 inch bay
Wij staan altijd klaar om al uw vragen te beantwoorden.
Chat Live (opens in new window)Wij staan altijd klaar om al uw vragen te beantwoorden.
Chat Live (opens in new window)In order to rebuild a RAID array, you need to replace a physical drive with an identical drive on the same RAID controller. Although standard RAID levels are generally agreed upon throughout the industry, the implementation varies between manufacturers. RAID arrays are typically not accessible when they are moved to another controller, and data may be unrecoverable if the drives are out of order or have been formatted or accessed by another RAID controller.
If a RAID controller has failed, you should get the exact same model of RAID controller.
Note: If a drive or drives were damaged, it is possible that the RAID array may be permanently unrecoverable.
RAID should not be considered a replacement for backing up your data. If critical data is going onto a RAID array, you should back up the data on another physical drive or logical set of drives.
With the following RAID modes, recovery is possible using the same StarTech.com product. Refer to the following table for the appropriate method to use to recover your RAID array.
RAID mode | Max # of failed drives | Procedure |
RAID 1 | Only one drive is needed for recovery. |
The array will rebuild and is accessible during the rebuilding process. |
RAID 3 | Single drive failure will rebuild. |
Note: Do not change the order of the drives.
|
RAID 5 | Single drive failure will rebuild. |
Note: Do not change the order of the drives.
|
RAID 10 | Only one drive in a mirrored set can fail. |
Note: Do not change the order of the drives.
|
Note: Not all StarTech.com devices support each of the RAID modes described below. For more information on the RAID modes that your device supports, refer to the manual or the StarTech.com product page.
Redundant Array of Independent Disks (RAID) is a virtual disk technology that combines multiple physical drives into one unit. RAID can create redundancy, improve performance, or do both.
RAID should not be considered a replacement for backing up your data. If critical data is going onto a RAID array, it should be backed up to another physical drive or logical set of drives.
The following are terms that are normally used in connection with RAID:
Different RAID levels exist for different application requirements.
Refer to the following table for the list of RAID modes offered by some StarTech.com products:
RAID mode | Description | Operation | Advantages | Disadvantages | Recovery |
RAID 0 | Striped disks | Data is split evenly between two or more disks. | Large size and the fastest speed. | No redundancy. | If one or more drives fails, this results in array failure. |
RAID 1 | Mirrored disks | Two or more drives have identical data on them. | A single drive failure will not result in data loss. | Speed and size is limited by the slowest and smallest disk. | Only one drive is needed for recovery. |
RAID 3 | Striped set with dedicated parity | Data is split evenly between two or more disks, plus a dedicated drive for parity storage. | High speeds for sequential read/write operations. | Poor performance for multiple simultaneous instructions. | A single drive failure will rebuild. |
RAID 5 | Striped disks with distributed parity | Data is split evenly between three or more disks. Parity is split between disks. | Large size, fast speed, and redundancy. | The total array size is reduced by parity. | A single drive failure will rebuild. |
RAID 10 | 1+0; Striped set of Mirrored Subset | Four or more drives are made into two mirrors that are striped. | Larger size and higher speed than RAID-1, and more redundancy than RAID-0. | No parity. | Only one drive in a mirrored set can fail. |
JBOD | Just a Bunch Of Disks | Any number of drives are accessed independently by the operating system. | Software RAID modes can be used. | Hardware RAID may have better performance. | N/A |
Big | Spanning or Concatenation | Data is written on one drive until it is full, and then the next drive(s) until it or they are full. | Creates a very large and simple array. |
No redundancy. |
N/A |
Clone | RAID 1 + Spare |
Two drives have identical data, plus one drive is used for rebuilding in case of a primary array failure. |
Seamless operation when one drive fails in a RAID-1 array. | Spare drive is not accessible to the user. | Only one drive is needed for recovery. |