Productcode: PIB2M21
Vergroot de dataopslagcapaciteit van uw Raspberry Pi of ander development board, door dit direct op een op M.2 NGFF SATA SSD aan te sluiten. Perfect voor speciale projecten en applicaties, ondersteunt deze USB naar M.2 SATA-converter alle Raspberry Pi modellen en andere development boards.
Met deze handige USB 2.0 naar M.2 SATA-converter kunt u de beperkte dataopslag van uw development board oplossen, omdat u een M.2 SATA-schijf op de USB-A poort van uw board kunt aansluiten.
De USB naar M.2 SATA-converter past precies bij uw bestaande development board Het is de perfecte aanvulling voor op development boards gebaseerde applicaties zoals bewaking, mediaspelers en servers, digital signage en IoT-/automatiseringsoplossingen. Deze converter biedt u de mogelijkheid uw M.2 SATA-schijven met uw development board te gebruiken, en te profiteren van de kleine vormfactor van M.2 SATA, ideaal voor applicaties met beperkte schuifruimte.
De converter is compatibel met M.2 SATA-schijven (2230, 2242, 2260 en 2280), eenvoudig te installeren en vereist geen stuurprogramma's. Ook worden een USB-kabel en alle montagemiddelen, waaronder standoffs, meegeleverd zodat deze converter snel en gemakkelijk in uw Raspberry Pi kan worden geïntegreerd.
StarTech.com biedt voor de bedrijfstak ongeëvenaarde ondersteuning zodat u snel aan de slag kunt. De PIB2M21 wordt gedekt door een 2-jarige garantie en gratis levenslange technische ondersteuning van StarTech.com.
NB:
Deze converter is uitsluitend geschikt voor M.2 SATA SSD's. Om te zien welk type M.2 -schijf u hebt, hoeft u alleen te kijken naar het aantal inkepingen (of ' keys') op het uiteinde van de schijf die op het M.2 contact is aangesloten. Op SATA gebaseerde M.2-schijven hebben twee inkepingen (een M key en een B key), terwijl op PCIe gebaseerde M.2-schijf slechts één inkeping (een M key) hebben.
Raspberry Pi is een handelsmerk van de Raspberry Pi Foundation
Warranty Information | Warranty | 2 Years |
---|---|---|
Connector(en) | 1 - Schijfaansluitingen | M.2 (SATA, B-Key, NGFF) |
1 - Hostaansluitingen | USB Micro-B (5-polig) | |
1 - Andere aansluiting(en) | USB Micro-B (5 pin) (Power) | |
Fysieke eigenschappen | Gewicht product | 21 g [0,7 oz] |
Kleur | Rood | |
Max. schijfhoogte | 80 mm [3,1 in] | |
Lengte product | 88 mm [3,5 in] | |
Breedte product | 56 mm [2,2 in] | |
Hoogte product | 11 mm [0,4 in] | |
Gebruiksomgeving | Bedrijfstemperatuur | 5°C to 50°C (41°F to 122°F) |
Opslagtemperatuur | -25°C to 70°C (-13°F to 158°F) | |
Vochtigheid | 15% - 90% rel. luchtvochtigheid | |
Hardware | Interface | USB 2.0 |
Bus type | USB 2.0 | |
Aantal stations | 1 | |
Schijfgrootte | 22m - M.2 NGFF | |
Schijftype | M.2 (SATA, B-Key, NGFF) | |
Ondersteunde schijfhoogte(n) | 2230 | |
2242 | ||
2260 | ||
2280 | ||
Chipsetcode | Renesas/NEC - µPD720231A | |
Indicatoren | 1 - LED-indicatoren | Activiteit |
Prestaties | Type en snelheid | USB 2.0 - 480 Mbit/s |
SATA III (6 Gbps) | ||
RAID | Nee | |
MTBF | 5.839.751 uur | |
Verpakkingsinformatie | Verzendgewicht (verpakt) | 110 g [3,9 oz] |
Package Length | 17 cm [6,7 in] | |
Package Width | 14,2 cm [5,6 in] | |
Package Height | 30 mm [1,2 in] | |
Voeding | Inclusief voedingsadapter | Gevoed via USB |
Wat wordt er meegeleverd | 1 - Meegeleverd | USB naar M.2 SATA-converter |
USB-A naar Micro-B-kabel | ||
set bevestigingsmateriaal voor de converter | ||
set bevestigingsmateriaal voor schijf | ||
verkorte handleiding |
Voor het opladen of synchroniseren van mobiele apparaten met micro USB-aansluiting vanaf een standaard USB-poort op uw pc of laptop
Wij staan altijd klaar om al uw vragen te beantwoorden.
Chat Live (opens in new window)Wij staan altijd klaar om al uw vragen te beantwoorden.
Chat Live (opens in new window)When you troubleshoot issues with a hard drive controller card, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
IDE, SATA, and eSATA cables
Hard drives
Hard drive controller card
To test your setup components, try the following:
Use the IDE, SATA, or eSATA cable, hard drive, and hard drive controller card in another setup to see if the problem is with the components or the setup.
Use a different IDE, SATA, or eSATA cable, hard drive, and hard drive controller card in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cables, it is recommended that you do the following:
Test each cable individually.
Use short cables when you are testing.
When you test the hard drive and hard drive controller card, it is recommended that you do the following:
To open the Device Manager, press the Windows key + R, type devmgmt.msc, and press Enter. Check the IDE ATA/ATAPI controllers (for IDE) section, or the Storage controllers (for SATA) section.
Do one of the following:
If you do not see the hard drive controller card in Device Manager, refer to the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=expansion-cards#pci-pcie-cannot-boot-os-or-detect-windows.
If the device is listed with an error, reinstall the drivers by completing the instructions on the website.
If the hard drive is listed with unallocated space, the hard drive needs to be formatted. Right-click unallocated and click New Simple Volume. Follow the on-screen instructions to complete the reformatting.
Note: Formatting a hard drive erases all of the data on it. Make sure that you back up all of your data before you reformat the hard drive.
To check Disk Management, press the Windows key + R, type diskmgmt.msc, and press Enter. Check to see if your hard drive is listed.
If the hard drive is listed as healthy but does not have a drive letter, for example, C:, right-click healthy and click Change Drive Letter and Paths. Click Add, assign a drive letter, and click OK.
Note: A formatted hard drive does not show up in Computer or My Computer until it has a drive letter assigned to it.