USB 3.1 (10bps) harddisk docking station voor één 2,5/3,5" SATA SSD/HDD schijf

Dock uw 2,5 inch en 3,5 inch SATA-schijf via krachtige USB 3.1 Gen 3.1 met UASP

Productcode: SDOCKU313

  • Open data van een 2,5/3,5 inch SATA SSD/HDD via ultrasnelle USB 3.1 Gen 2
  • Krijg toegang tot schijven met de volle snelheid en ondersteuning van SATA I, II en III (tot 6 Gbps)
  • Topladerdesign met ingebouwde uitwerpknop voor gemakkelijke schijftoegang
Uw prijs
€76,99 EUR excl. VAT
€93,16 EUR incl. VAT

Ontketen de kracht van USB 3.1 Gen 2 (10 Gbps) met dit 1-schijf docking station. Het ondersteunt zowel 2,5 inch als 3,5 inch form factor solid-state drives en harde schijven, met een hoge opslagcapaciteit van 6 TB.

Benut de snelheid van USB 3.1 Gen 2

Tabel met USB-bestandstransmissiesnelheden toont USB 3.1 Gen 2 met 10 Gbps is twee keer zo snel als USB 3.0 met 5 Gbps

USB 3.1 Gen 2 biedt u meer bandbreedte en snelheid, met bestandstransmissiesnelheden tot 10 Gbps - twee keer zo snel als USB 3.0 (USB 3.1 Gen 1). Daardoor kunt u de hoge prestaties van de laatste SSD's en harde schijven benutten, terwijl knelpunten in uw datatransmissie worden opgelost.

Toplader design voor gemakkelijke schijftoegang

Het docken en swappen van schijven van uw desktop of laptop is nog nooit zo gemakkelijk geweest. Plaats uw schijven gewoon in de toplader sleuf, zonder dat gereedschap of trays nodig zijn. Met de HDD-uitwerpknop kan de schijf snel en eenvoudig worden verwijderd.

Comfortabele compatibiliteit

Het docking station wordt geleverd met een USB Type-A-naar-B-kabel, voor neerwaartse compatibiliteit met uw bestaande USB 3.0, 2.0 en 1.x apparaten.  Bovendien ondersteunt het UASP voor nog betere prestaties.

De SDOCKU313 wordt gedekt door een 2-jarige garantie en gratis levenslange technische ondersteuning van StarTech.com.

Toepassingen

  • Perfect voor systeembouwers en IT-specialisten die snel toegang moeten hebben tot schijven voor beeldvorming
  • Back-up uw data snel naar een externe archiefschijf
  • Kopieer data van de ene harde schijf naar de andere
  • Neem de back-up-data gewoon mee naar een externe locatie voor veilige opslag

Partnernummers

  • Ingram Micro Belgium 2996001
  • Tech Data - Belgium 4428464
  • UPC 065030861656

Compatibility

Specificaties

Warranty Information Warranty 2 Years
Connector(en) 1 - Schijfaansluitingen SATA data & voeding combinatie (7+15-polig)
1 - Hostaansluitingen USB 3.1 USB Type-B (9-polig, Gen 2, 10 Gbps)
Fysieke eigenschappen Gewicht product 392 g [13,8 oz]
Kleur Zwart
Type behuizing Kunststof
Lengte product 0 mm [0,0 in]
Breedte product 0 mm [0,0 in]
Hoogte product 0 mm [0,0 in]
Gebruiksomgeving Bedrijfstemperatuur 5°C to 35°C (35°F to 95°F)
Opslagtemperatuur -20°C to 50°C (-4°F to 122°F)
Vochtigheid 20% - 80% rel. luchtvochtigheid
Hardware Interface USB 3.1 Gen 2
Bus type USB 3.1 Gen 2
Aantal stations 1
Schijfgrootte 2.5in & 3.5in
Schijftype SATA
Schijfinstallatie Verwijderbaar
Aantal 2,5 inch bays 2
Ventilator(en) Nee
Chipsetcode ASMedia - ASM1351
Indicatoren 1 - LED-indicatoren Voeding & activiteit
Prestaties Maximale overdrachtsnelheid 10 Gbps
Type en snelheid USB 3.1 Gen 2 - 10 Gbit/s
UASP ondersteuning Ja
4Kn Support Ja
Type en snelheid SATA III (6 Gbps)
TRIM Support Ja
Max. schijfcapaciteit Momenteel getest met harde schijven tot 6 TB bij 7200 tpm
Software Besturingssystemen OS independent; No software or drivers required
Speciale opmerkingen / vereisten Notitie Windows 7 and earlier Windows versions do not support TRIM with USB to SATA devices.
Verpakkingsinformatie Package Height 17,1 cm [6,7 in]
Package Length 91 mm [3,6 in]
Verzendgewicht (verpakt) 758 g [26,8 oz]
Package Width 16,3 cm [6,4 in]
Voeding Inclusief voedingsadapter Inclusief wisselstroomadapter
Ingangsspanning 100 - 240 AC
Ingangsstroom 0.6
Uitgangsspanning 12V DC
Uitgangsstroom 2A
Polariteit pin midden Positief
Stekkertype M
Vermogensopname 24
Wat wordt er meegeleverd 1 - Meegeleverd USB 3.1 HDD dock
USB 3.1 A naar B kabel - 102 cm
Universele voedingsadapter - 127 cm (kabel)
4 - Meegeleverd Voedingsadapter stekkers (NA,EU,GB,ANZ)
1 - Meegeleverd Verkorte handleiding

Accessoires

USB3CAB1M

1 m gecertificeerde SuperSpeed USB 3.0 A-naar-B-kabel - M/M

Sluit uw USB 3.0-apparaten aan met deze hoogwaardige USB 3.0 gecertificeerde kabel

Uw prijs
€10,99 EUR excl. VAT
€13,30 EUR incl. VAT
SDOCKU313

USB 3.1 (10bps) harddisk docking station voor één 2,5/3,5" SATA SSD/HDD schijf

Dock uw 2,5 inch en 3,5 inch SATA-schijf via krachtige USB 3.1 Gen 3.1 met UASP

Uw prijs
€76,99 EUR excl. VAT
€93,16 EUR incl. VAT
USB3SAB1

1 ft SuperSpeed USB 3.0 Cable A to B - M/M

Sluit uw externe apparaten aan en zet gegevens over 10x sneller dan met USB 2.0

Uw prijs
€6,99 EUR excl. VAT
€8,46 EUR incl. VAT
Uw prijs
€6,99 EUR excl. VAT
€8,46 EUR incl. VAT
USB3SAB3BK

90 cm SuperSpeed USB3.0 Kabel - USB-A naar USB-B - M/M - Zwart

Sluit uw externe apparaten aan en zet gegevens over 10x sneller dan met USB 2.0

Uw prijs
€6,99 EUR excl. VAT
€8,46 EUR incl. VAT
HDDSLEV35

3,5 inch Silicone Harde Schijf Beschermhoes met Connectorkap

Biedt bescherming tegen schokken en stoten aan een 3,5 inch harde schijf

Uw prijs
€9,99 EUR excl. VAT
€12,09 EUR incl. VAT
HDDSLEV25

2,5 inch Silicone Laptop Harde Schijf Beschermhoes met Connectorkap

Biedt bescherming tegen schokken en stoten aan een 2,5 inch harde schijf

Uw prijs
€4,99 EUR excl. VAT
€6,04 EUR incl. VAT
HDDCASE25BK

2,5 inch Antistatische Harde Schijf Beschermhoes - Zwart (3 stuks)

Zorgt voor een veilige omgang met en antistatische bescherming voor de meeste 2,5 inch harde schijven

Uw prijs
€17,99 EUR excl. VAT
€21,77 EUR incl. VAT
SAT2IDEADP

SATA naar voor 2,5 of 3,5 inch IDE Harde Schijf Adapter voor Docking Stations

Gebruik uw 2,5 of 3,5 inch IDE harde schijven in een SATA docking station

Uw prijs
€28,99 EUR excl. VAT
€35,08 EUR incl. VAT
SAT32MSAT257

mSATA SSD naar 2,5 inch SATA-adapter / converter

Verander een mSATA SSD in een 7 mm hoge 2,5 inch SATA 6 Gbps Open Frame SSD

Uw prijs
€30,99 EUR excl. VAT
€37,50 EUR incl. VAT
SAT32M225

M.2 SSD naar 2,5 inch SATA-adapter / converter

Verander een M.2 SSD in een 7 mm hoge 2,5 inch SATA 6 Gbps Open Frame SSD

Uw prijs
€29,99 EUR excl. VAT
€36,29 EUR incl. VAT

Drivers/Downloads

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Firmware

Datasheet

Productondersteuning

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Veelgestelde vragen (FAQ)

Troubleshooting

When you troubleshoot issues with a hard drive dock or duplicator, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • IDE, SATA, and eSATA cables
  • Hard drives
  • Hard drive dock or duplicator

To test your setup components, try the following:

  • Use the cables, hard drives, and hard drive dock or duplicator in another setup to see if the problem is with the components or the setup.
  • Use a different cable, hard drive, and hard drive dock or duplicator in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test the hard drive and hard drive dock or duplicator, it is recommended that you do the following:

Note: For a hard drive duplicator you may need to switch the device to PC mode (if available).

  1. To check Disk Management, press the Windows key + R, type diskmgmt.msc, and press Enter. Check to see if your hard drive is listed.
  2. Do one of the following:
  • If the hard drive is listed with unallocated space, the hard drive needs to be reformatted. Right-click unallocated and click New Simple Volume. Follow the on-screen instructions to complete the reformatting.​

Note: Formatting a hard drive erases all of the data on it. Make sure that you back up all of your data before you reformat the hard drive. 

  • If the hard drive is listed as healthy but does not have a drive letter, for example, C:, right-click healthy and click Change Drive Letter and Paths. Click Add, assign a drive letter, and click OK.

Note: A formatted hard drive will not show up in Computer or My Computer until it has a drive letter assigned to it.

This docking station allows the hard drive to enforce its own power state, as opposed to enforcing a power state that keeps the hard drive active at all times. Since most newer hard drives have low-power energy conservation modes, this will cause the hard drive to enter an idle state if it is not used for a certain amount of time. 

 

If your setup components support USB 3.1 but you are experiencing slower transfer speeds than you expected, consider the following:

  • A USB host connection with multiple USB 3.1 ports might not be able to support 10Gbps on each port simultaneously.
  • The type of port on a device does not determine whether the device is capable of USB 3.1 speeds. A USB-C port might not support USB 3.1 speeds, while USB-A and USB-B ports might support USB 3.1 speeds.
  • Any other devices that you include in your setup, such as an older hard drive in a USB 3.1 enclosure, might create a point of congestion and slow down transfer speeds.

To confirm the functionality of your USB host connection, its ports, and any other devices in your setup, refer to the information provided by the manufacturer.

Note: USB 3.1 is also known as USB 3.1 Gen 2 (10Gbps). Devices that support USB 3.1 should have the USB 3.1 symbol on them. If the USB 3.1 symbol does not appear on your USB source or device, refer to the information provided by the manufacturer to confirm whether the USB source or device support USB 3.1.

U zou de firmware van uw apparaat niet moeten upgraden als u geen problemen hebt met de functionaliteit van uw apparaat. De enige keer dat u een upgrade zou moeten overwegen, is wanneer u een probleem met het apparaat hebt en u hebt bevestigd dat de firmware dit probleem kan oplossen.  U kunt dit bevestigen door de bij de firmware geleverde documentatie te raadplegen of contact op te nemen met ons Technisch Ondersteuningsteam. Een verkeerde upgrade van de firmware kan leiden tot verminderde prestaties. U kunt dus het best contact opnemen met StarTech.com als u dit wilt uitvoeren.

Hoe gaat u te werk

To confirm that Windows detects your USB device, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

To confirm that the Mac OS detects your USB device, complete the following:

  1. Click the Apple icon.
  2. Click About This Mac.
  3. Click More Info or System Report.
  4. Under the appropriate heading, confirm that your USB device is listed and that there isn't an error. For example, a network card would be under Ethernet Cards.

You may need to refresh the System Information page after you plug in your device.  To do so, press Command R with the System Information page open.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Voor uw aanschaf

Yes, this device supports the TRIM command. If the OS issues a TRIM command, the command will be passed to the connected device.

To determine if your hard drive will work in this device, on the product page, click the Technical Specifications tab, and do the following:

  • Make sure that the device supports the storage size of your hard drive. If the storage size of your hard drive is larger than what the device was tested with, the hard drive will likely still work with the enclosure.
  • Confirm that your hard drive uses the same interface type as the device. For example, IDE, SATA, or M.2.
  • Make sure that the device supports the physical size of your hard drive, such as 2.5 inches or 3.5 inches.
  • Verify that the power consumption of your hard drive doesn’t exceed the power output of the device. If you’re using multiple hard drives, make sure that the combined power consumption of all of the hard drives doesn’t exceed the power output of the docking station.

USB 3.1 is the most recent version of the USB (Universal Serial Bus) standard for connecting computers and electronic devices. It is capable of data transfer speeds up to 10Gbps, and while it can use the USB-C connector type, it can also use a variety of other connector types. To achieve USB 3.1 transfer speeds, your USB host connection, cables, and device must all support USB 3.1. USB 3.1 is also known as USB 3.1 Gen 2 (10Gbps). 

USB 3.0 is capable of data transfer speeds up to 5Gbps. USB 3.0 is also known as USB 3.1 Gen 1 (5Gbps).

USB 3.1 is backwards compatible with USB 3.0 and USB 2.0, except in the following scenarios:

  • USB-B 3.1 cables are not compatible with USB-B 2.0 ports.
  • Unless you use an adapter, USB-C ports or cables will not work with USB-A or USB-B ports or cables.
  • Devices that require USB 3.1 transfer speeds of 10Gbps might not work with USB 3.0 or USB 2.0, or you might experience lower transfer speeds and impacted performance.
  • Bus-powered USB devices that requires more power than what USB 2.0 can provide are not compatible with USB 2.0.

To transfer data at speeds of 10Gbps, you need to confirm that the following components in your setup support USB 3.1:

  • The USB host connection
  • The USB cable
  • The USB device and any subcomponents (for example, a hard drive docking station and the hard drives in the docking station)

Note: USB 3.1 is also known as USB 3.1 Gen 2 (10Gbps). Devices that support USB 3.1 should have the USB 3.1 symbol on them. If the USB 3.1 symbol does not appear on your USB source or device, refer to the information provided by the manufacturer to confirm whether the USB source or device support USB 3.1.

The included USB cable for this USB 3.1 Gen 2 device has been tested and verified to perform at USB 3.1 Gen 2 speeds of 10Gbps.

Hard Drives

Windows 10 

Before you can access a new or formatted drive in your operating system, you need to initialize it first and then create a partition on the drive. A partition defines an area of the drive to use for storing data. The partition uses a file system (for example, ex-FAT, NTFS, and so on).

Initialize a drive

Note: You typically only need to initialize a drive if the drive is new. If you cannot find an uninitialized drive in Disk Management, skip the following steps and try to partition your device.

  1. Press the Windows key + R, type compmgmt.msc, and click Run to open Computer Management.

  2. Navigate to Disk Management.

  3. When prompted to, initialize your disk(s). If you are running Windows® 7 or later and are using a drive larger than 2TB, initialize the disk(s) with GPT. If you are running an earlier version of Windows, initialize the disk(s) with MBR. For more information, visit the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=hard-drives#mbr-vs-gpt.

  4. Click OK.

Create a partition in a drive

Note: The following steps create an NTFS partition that uses the entire drive space. To use a different file system, select a different option in step 6.

  1. Right-click Unallocated or RAW volume, and select New Simple Volume.

  2. In the New Partition Wizard, click Next.

  3. Select Primary partition.

  4. Leave the partition size set to default, and click Next.

  5. Assign a drive letter or leave it set to the default, and click Next.

  6. Enter the following settings to format the partition:

  • In the File System field, enter NTFS.
  • Set the Allocation unit size to Default.
  • In the Volume label field, enter <your name/reference>.
  • Select the Perform a quick format check box.
  • Clear the Enable file and folder compression check box.
  1. Click Next > Finish.

The new drive should appear in Windows Explorer.

Mac OS

Before you can access a new or formatted drive in your operating system, you need to initialize it first and then create a partition on the drive. A partition defines an area of the drive to use for storing data. The partition uses a file system (for example, HFS+, ex-FAT, NTFS, and so on).

Initialize a drive

Mac OSX detects a drive that needs to be initialized and automatically prompts you to initialize the drive. If you are prompted to initialize the drive, click Initialize. If you are not prompted to initialize the drive and you cannot find the drive in Finder, you will need to create a partition on the drive.

Create a partition on a drive

Note: The following steps create an HFS+ (Mac OS Extended (Journaled)) partition that uses the entire drive space.

To create a partition on a new drive, complete the following:

  1. Open Finder.

  2. Navigate to Applications and click Utilities.

  3. Open Disk Utility.

  4. Select the new drive and click the Partition tab.

  5. Click Options and verify that it is set to GUID Partition Table.

  6. Enter a name for the partition.

  7. Click Partition.

The drive should now be accessible in Finder.

 

Compliance and safety

Compliance letters

  • WEEE
    • Taal: English
  • RoHS
    • Taal: English

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Uitvoering en specificaties van het product zijn zonder aankondiging vatbaar voor wijzigingen.
Terug naar boven