Productcode: USBDUPE17
Met deze USB-duplicator en -wisser kunt u tot zeven USB flashdrives klonen of wissen, zonder verbinding met een hostcomputer. Dit betekent dat u efficiënter kunt werken en grotere batches USB-schijven kunt verwerken, waardoor u tijd en inspanning bespaart.
De standalone USB-duplicator en -wisser is perfect voor IT-professionals en systeembeheerders in bedrijven, opleidingsinstellingen en marketing- of verkoopomgevingen.
Efficiënte 1:7 schijfduplicatie
Met de duplicator kunt u tegelijkertijd tot zeven schijven kopiëren, zowel met synchrone als asynchrone duplicatie, met snelheden tot 1,5 GB per minuut. Asynchrone duplicatie betekent dat u USB-opslagapparaten kunt verwijderen en terugplaatsen tijdens het kopiëren van andere schijven. De duplicator biedt twee duplicatiemodi: systeem en bestand en geheel bestand.
Wis tegelijkertijd meerdere USB-schijven
Met de schijfduplicator/-wisser kunt u tot zeven flashdrives tegelijkertijd wissen. Zo kunt u gemakkelijk grote batches USB-schijven wissen voor hergebruik. De flashdrive-duplicator heeft drie wismodi: quick erase, single pass erase en multi-pass erase (voldoet aan de normen van het Amerikaanse Ministerie van Defensie).
Ontworpen voor gebruiksgemak
De flashdrive-duplicator en -wisser ondersteunt USB 3.0, USB 2.0 en USB 1.1 flashdrives, en biedt zo een eenvoudige en voordelige manier om uw USB-schijven opnieuw en voor andere doeleinden te gebruiken. Dit apparaat heeft een robuuste metalen behuizing en een compact, standalone design en is dus de perfecte desktopaccessoire. De flashdrive-wisser en -kopieerder heeft ook een LCD-scherm, waardoor u het wissen en dupliceren gemakkelijk in de gaten kunt houden en kunt zien wanneer de opdracht is voltooid.
De USBDUPE17 is TAA-conform en wordt gedekt door een 2-jarige garantie en gratis levenslange technische ondersteuning van StarTech.com.
Warranty Information | Warranty | 2 Years |
---|---|---|
Connector(en) | 8 - Schijfaansluitingen | USB Type-A (4-polig) USB 2.0 |
Fysieke eigenschappen | Kleur | Zwart |
Type behuizing | Staal | |
Lengte product | 19 cm [7,5 in] | |
Breedte product | 16 cm [6,3 in] | |
Hoogte product | 34,6 mm [1,4 in] | |
Gewicht product | 1,0 kg [2,3 lb] | |
Gebruiksomgeving | Bedrijfstemperatuur | 5°C ~ 45°C (41°F ~ 113°F) |
Opslagtemperatuur | -20°C ~85°C (-4°F ~ 185°F) | |
Vochtigheid | 20% ~ 80% | |
Hardware | Bus type | USB 2.0 |
Aantal stations | 7 | |
Schijftype | USB-flashdrive | |
Schijfinstallatie | Verwijderbaar | |
Chipsetcode | Xilinx - Spartan (XC3S700A) | |
Buffergrootte | 128 MB | |
Indicatoren | 8 - LED-indicatoren | Groen (actief/succesvol kopiëren) |
Rood (fout) | ||
Prestaties | Duplication Modes | System and File |
Duplication Speed | 1.5GBpm | |
Wismodi | Quick Erase | |
Max. schijfcapaciteit | Maximum schijfgrootte 2 TB | |
Duplication Modes | Sector by Sector (Whole Drive) | |
Wismodi | 1-Pass Overwrite (NIST SP 800-88 Rev 1 - Clear) | |
Aantal plaatsingen | 1500 keer | |
Wismodi | 3-Pass Overwrite | |
MTBF | 8760 uur | |
Software | Besturingssystemen | Onafhankelijk van besturingssysteem; Geen software of drivers nodig |
Speciale opmerkingen / vereisten | Systeem- en kabelvereisten | Voor duplicatie moeten de doelschijven dezelfde capaciteit hebben als of een grotere capaciteit hebben dan de bronschijf. |
Ondersteunt het kopiëren/klonen/wissen naar/van SD / SDHC / Micro SD / MMC / Mini SD / CF-media via een USB-multimediakaartlezer (apart verkrijgbaar), en naar harde schijven of solid-state drives via een harddisk docking station of USB-behuizing (apart verkrijgbaar), indien ondersteund door de opslagmedia | ||
Verpakkingsinformatie | Verzendgewicht (verpakt) | 3,0 kg [6,5 lb] |
Package Length | 44,5 cm [17,5 in] | |
Package Width | 23,5 cm [9,3 in] | |
Package Height | 85 mm [3,3 in] | |
Voeding | Inclusief voedingsadapter | Inclusief wisselstroomadapter |
Ingangsspanning | 100 - 240 AC | |
Ingangsstroom | 1.6A Max | |
Uitgangsspanning | 12V DC | |
Uitgangsstroom | 9A | |
Stekkertype | 4-pin DIN | |
Vermogensopname | 108W | |
Wat wordt er meegeleverd | 1 - Meegeleverd | duplicator en wisser |
universele voedingsadapter (N-A/JP, VK, EU, ANZ) | ||
verkorte handleiding |
Voeg een compacte externe geheugenkaartlezer toe aan iedere computer met een USB-poort
Dock uw 2,5 of 3,5 inch SATA SSD's/HDD's en voeg een snelle oplaadmogelijkheid via USB toe in een stijlvol docking station
Dock uw 2,5 of 3,5 inch SATA III SSD's/HDD's via USB 3.0 met UASP
Snelle hot-swappable toegang tot uw 2,5 of 3,5 inch SATA harde schijven, aangesloten via USB 3.0
Dok uw 2,5 inch of 3,5 inch ” SATA SSD's/HDD's in een stijlvol wit dockingstation met een geïntegreerde 3-poorts USB 3.0 hub
Maak externe, verwisselbare toegang mogelijk tot 2,5 inch SATA-schijven vanaf een draagbare mini USB 2.0 Drive Dock
Verander een 3,5 inch SATA harde schijf in een door UASP ondersteunde USB 3.0 externe harde schijf
Verander een 3,5 inch SATA harde schijf in een door UASP ondersteunde USB 3.0 externe harde schijf
Verander een 2,5 inch SATA harde schijf of solid-state drive in een door UASP ondersteunde USB 3.0 externe harde schijf
Verander een 2,5 inch SATA harde schijf of solid-state drive in een door UASP ondersteunde USB 3.0 externe harde schijf
Verander een 2,5” SATA harde schijf in drie onafhankelijke virtuele optische drives, of een draagbare USB 3.0 opslagoplossing
Verander een 2,5 inch SATA HDD/SSD in een volledige externe opslagoplossing via USB 3.0 met UASP
Wij staan altijd klaar om al uw vragen te beantwoorden.
Chat Live (opens in new window)Wij staan altijd klaar om al uw vragen te beantwoorden.
Chat Live (opens in new window)Before you can access a new or formatted drive in your operating system, you need to initialize it first and then create a partition on the drive. A partition defines an area of the drive to use for storing data. The partition uses a file system (for example, ex-FAT, NTFS, and so on).
Note: You typically only need to initialize a drive if the drive is new. If you cannot find an uninitialized drive in Disk Management, skip the following steps and try to partition your device.
Press the Windows key + R, type compmgmt.msc, and click Run to open Computer Management.
Navigate to Disk Management.
When prompted to, initialize your disk(s). If you are running Windows® 7 or later and are using a drive larger than 2TB, initialize the disk(s) with GPT. If you are running an earlier version of Windows, initialize the disk(s) with MBR. For more information, visit the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=hard-drives#mbr-vs-gpt.
Click OK.
Note: The following steps create an NTFS partition that uses the entire drive space. To use a different file system, select a different option in step 6.
Right-click Unallocated or RAW volume, and select New Simple Volume.
In the New Partition Wizard, click Next.
Select Primary partition.
Leave the partition size set to default, and click Next.
Assign a drive letter or leave it set to the default, and click Next.
Enter the following settings to format the partition:
The new drive should appear in Windows Explorer.
Before you can access a new or formatted drive in your operating system, you need to initialize it first and then create a partition on the drive. A partition defines an area of the drive to use for storing data. The partition uses a file system (for example, HFS+, ex-FAT, NTFS, and so on).
Mac OSX detects a drive that needs to be initialized and automatically prompts you to initialize the drive. If you are prompted to initialize the drive, click Initialize. If you are not prompted to initialize the drive and you cannot find the drive in Finder, you will need to create a partition on the drive.
Note: The following steps create an HFS+ (Mac OS Extended (Journaled)) partition that uses the entire drive space.
To create a partition on a new drive, complete the following:
Open Finder.
Navigate to Applications and click Utilities.
Open Disk Utility.
Select the new drive and click the Partition tab.
Click Options and verify that it is set to GUID Partition Table.
Enter a name for the partition.
Click Partition.
The drive should now be accessible in Finder.