Product Zoeken
Niet meer leverbaar

1000 Mbit/s Gigabit Ethernet Multi-Mode ST Glasvezel PCI Express Netwerkkaart - 550m

Sluit een pc rechtstreeks en veilig aan op een Gigabit multi-mode ST glasvezelnetwerk via een beschikbare PCI Express-slot

Productcode: PEX1000MMST

  • 1000 Mbit/s full-duplex-functionaliteit
  • Advanced Configuration Power Management Interface (ACPI) 2.0
  • Inclusief diagnostisch hulpprogramma
De PEX1000MMST 1000 Mbit/s Gigabit (MM ST) Glasvezel PCI Express Ethernet Netwerkkaart biedt de perfecte glasvezeloplossing naar uw bureau. De Ethernet Glasvezel Netwerkkaart is een eenvoudige oplossing voor het rechtstreeks aansluiten van een computer op een glasvezelnetwerk en kan worden geïnstalleerd in een PCI Express-slot. Met ondersteuning voor full-duplex en Gigabit-overdrachtsnelheden is deze kaart uitermate geschikt voor toepassingen waarbij een hoge bandbreedte nodig is. De PEX1000MMST is ideaal voor beveiligde netwerken en biedt een directe glasvezelverbinding die niet onderhevig is aan elektronische interferentie zoals standaard RJ45-netwerken. Met 2 jaar garantie en gratis levenslange technische ondersteuning door StarTech.com

Toepassingen

  • Ideaal voor beveilige systemen – een directe glasvezelverbinding betekent geen elektronische interferentie zoals dit bij standaard RJ45-netwerkkaarten wel kan voorkomen
  • Perfect voor geïntegreerde industriële signaleringssystemen en high-speed videobewaking
  • Behoud van gigabit-netwerksnelheid naar een externe locatie over lange afstanden

Het voordeel van StarTech.com

  • Directe glasvezel betekent geen elektronische interferentie zoals bij standaard RJ45-netwerkkaarten
  • De PCI Express-interface zorgt voor echte Gigabit-netwerksnelheden, in tegenstelling tot vergelijkbare PCI-glasvezelkaarten waarbij de snelheid door de PCI-slot zelf wordt beperkt
  • Snelle en eenvoudige plug-and-play installatie

Partnernummers

  • Ingram Micro Belgium 1822426
  • UPC 065030841788

Compatibility

  • Windows 8 logo
  • Windows Server 2012 logo
  • Mac OS X Mavericks (10.9) logo
  • Linux logo
  • Windows 7 logo
Windows® 8 / 8.1 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64)
Windows® Server 2012, 2008 R2
Mac OS® 10.x (Tested up to 10.9)
Linux

Specificaties

Warranty Information Warranty 2 Years
Connector(en) 1 - Type connector(en) PCI Express x1
1 - Externe poorten Glasvezel ST duplex
Fysieke eigenschappen Lengte product 10,9 cm [4,3 in]
Breedte product 83 mm [3,3 in]
Hoogte product 20 mm [0,8 in]
Gewicht product 80 g [2,8 oz]
Gebruiksomgeving Bedrijfstemperatuur 0°C to 45° C (32°F to 113°F)
Opslagtemperatuur -10°C to 70°C (14°F to 158°F)
Vochtigheid 5% - 95% rel. luchtvochtigheid (niet-condenserend)
Hardware Poorten 1
Interface RJ45 (gigabit Ethernet)
Bus type PCI Express
Kaarttype Standaard
Industriestandaarden IEEE802.3z 1000Base-SX/1000Base-LX, IEEE802.3x, IEEE802.1Q, IEEE802.1p, IEEE802.3ad
Chipsetcode Realtek - RTL8168B
Indicatoren 1 - LED-indicatoren Activiteit (geel)
Verbinding (groen)
Prestaties Maximale kabellengte 550 m [1804,0 ft]
Golflengte 850nm
Compatibele netwerken 1000 Mbit/s (1 Gbit/s)
Software Besturingssystemen Windows® 8 / 8.1 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64)
Windows® Server 2012, 2008 R2
Mac OS® 10.x (Tested up to 10.9)
Linux
Speciale opmerkingen / vereisten Notitie Niet compatibel met 10/100
Verpakkingsinformatie Package Length 21,3 cm [8,4 in]
Package Width 50 mm [2,0 in]
Package Height 17,5 cm [6,9 in]
Verzendgewicht (verpakt) 300,0 g [10,6 oz]
Voeding Vermogensopname 2.3W Max
Wat wordt er meegeleverd 1 - Meegeleverd PCI Express Gigabit Ethernet Netwerkkaart
Handleiding

Drivers/Downloads

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Drivers:

Handleiding:

Datasheet

Productondersteuning

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Veelgestelde vragen (FAQ)

Installatie

Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).

To install the driver:

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Documents and Settings\your_name\My Documents\Downloads).

  1. Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
  2. Select the appropriate folder for your operating system.
  3. Double-click Setup.exe.
  4. Follow the on-screen prompts to install the device drivers and restart the computer when prompted.
  5. Your computer will automatically complete the driver installation and your device should be ready to use.

Troubleshooting

When you troubleshoot issues with a network adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Ethernet cables
  • Network devices
  • Computer system

To test your setup components, try the following:

  • Use the Ethernet cables, network devices, and computer system in another setup to see if the problem is with the components or the setup.
  • Use different Ethernet cables, network devices, and a different computer system in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.
  • Use short cables when you are testing.

When you test the Ethernet cables, network devices, and computer system, it is recommended that you do the following:

Sometimes an on-board network interface card (NIC) conflicts with a new NIC.  In these cases it is best to disable the on-board NIC.

The best way to disable your on-board NIC is to go into your BIOS and disable it there if possible.  To do this, consult your motherboard manual.

You can also disable any NIC in Windows.  Here is how you do this:

First click Start, or, in Windows 10 and 8, hold down the Windows key and press X.  Then click Control Panel.

Windows 10

  1. Click Network and Internet.
  2. Click Network and Sharing Center.
  3. On the left, click Change adapter settings.
  4. Right-click the NIC that you would like to disable and select Disable.

Windows 8

  1. Click Network and Sharing Center.
  2. On the left, click Change adapter settings.
  3. Right-click the NIC that you would like to disable and select Disable.

Windows 7

  1. Click Network and Internet.
  2. Click Network and Sharing Center.
  3. On the left, click Change adapter settings.
  4. Right-click the NIC that you would like to disable and select Disable.

Windows Vista

  1. Click Network and Sharing Center.
  2. On the left, click Manage network connections.
  3. Right-click the NIC that you would like to disable and select Disable.

Windows XP

  1. Click Network Connections.
  2. Right-click the NIC that you would like to disable and select Disable.

If you are experiencing speed or connectivity issues, it is best to set a specific speed at half or full duplex in your settings.  You can set your network adapter to perform at a certain speed, but the device that the adapter is connected to (whether it is a router, switch, or computer) must also be able to perform at the same speed.

Note: You must log in as the local administrator before you continue.

To open Device Manager:

  • Press Windows key + R.
  • Type devmgmt.msc.
  • Click OK.
  1. Open the Networking adapters section.
  2. Right-click the network adapter that you want to change and select Properties.
  3. Click the Advanced tab.
  4. Scroll down to Speed & Duplex. By default, it is set to Auto-Negotiate. Select any of the speeds that you see in the list.
  5. Click OK and restart your computer.

Hoe gaat u te werk

StarTech.com does not support a Preboot Execution Environment (PXE) as this requires third-party software. However, our devices can be used as long as the following conditions are met:

  1. The BIOS must support PXE.
  2. The BIOS must see the card.
  3. The environment must have drivers for the chipset used in the card.
  4. If using a USB networking card, the environment must have support for USB devices as well.

To confirm that Windows detects your expansion card, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Uitvoering en specificaties van het product zijn zonder aankondiging vatbaar voor wijzigingen.
Wacht...
Terug naar boven