10/100 Mbit/s Ethernet naar USB 2.0 Netwerk LPR Printserver

Deel een standaard USB-printer met meerdere gebruikers via een Ethernet-netwerk

Productcode: PM1115U2

  • Deel één USB-printer met meerdere gebruikers via een netwerk
  • Print vanaf elke netwerkcomputer, op willekeurige plaats op kantoor
  • Biedt een betrouwbare Ethernet-verbinding met 10Base-T/100Base-TX auto-sensing
Uw prijs
€66,99 EUR excl. VAT
€81,06 EUR incl. VAT

Deze printserver ter grootte van een handpalm vergemakkelijkt het delen van een USB-printer met gebruikers op uw netwerk. Het is de ideale oplossing voor thuis- of kleine kantoornetwerken.

Betrouwbaar, voordelig netwerkprinten

Geniet van voordelig netwerkprinten voor meerdere gebruikers. Met de USB 10/100 Mbps printserver kunt u één USB-printer delen met meerdere gebruikers in uw netwerk, in plaats van aparte printers te moeten kopen voor elk afzonderlijk werkstation.

Zet uw gedeelde printer op een gemakkelijke plaats

Met beheer via het internet kunt u de printerserver via een webbrowser installeren en controleren, zodat u uw printer op een voor iedereen praktische plaats kunt zetten - het is niet nodig om de printer naast uw computer te plaatsen. U kunt printopdrachten naar een andere gebruiker thuis of op kantoor sturen, of zelfs naar een printer in een ander land.

Eenvoudig te gebruiken en te installeren

Deze compacte en lichtgewicht printserver kan eenvoudig worden geïnstalleerd met eenvoudig te begrijpen installatiewizard en beheer op afstand via het internet. U sluit de printserver gewoon via een USB-kabel aan op de USB-poort van uw printer, en dan via een RJ45 netwerkkabel op de rest van uw netwerk.

Ondersteunt LPR netwerkprinten en Bonjour Print Services

De printerserver ondersteunt het Line Printer Remote (LPR)-protocol, dat printen via het internet mogelijk maakt. Het ondersteunt ook Bonjour Print Services, waardoor u gemakkelijker printers op uw netwerk kunt vinden en configureren.

De PM1115U2 wordt gedekt door een 2-jarige garantie en gratis levenslange technische ondersteuning van StarTech.com.

Toepassingen

  • Laat meerdere gebruikers van een Ethernet-netwerk een USB-printer te delen
  • Biedt een betrouwbare netwerk print-oplossing voor thuis, kleine kantoren, opleidingsinstituten en overheidsinstellingen en elke andere situatie waar het delen van een printer nodig is

Partnernummers

  • Ingram Micro Belgium 3101157
  • D&D Distribution PM1115U2CA
  • Tech Data - Belgium 4428581
  • UPC 065030855174

Compatibility

  • Windows 7 logo
  • Windows 8 logo
  • Mac OS X Yosemite (10.10) logo
  • Windows Server 2012 logo
  • Windows 10 logo
Windows® XP, 7, 8 / RT, 10
Windows Server® 2003, 2008 R2, 2012
Mac OS® 10.6 to 10.10

Specificaties

Warranty Information Warranty 2 Years
Connector(en) 1 - Externe poorten RJ-45
USB Type-A (4-polig) USB 2.0
Fysieke eigenschappen Kleur Zwart
Type behuizing Kunststof
Lengte product 53 mm [2,1 in]
Breedte product 54 mm [2,1 in]
Hoogte product 23 mm [0,9 in]
Gewicht product 62 g [2,2 oz]
Gebruiksomgeving Bedrijfstemperatuur 0°C to 40°C (32°F to 104°F)
Opslagtemperatuur -10°C to 70°C (14°F to 158°F)
Vochtigheid 10% - 90% rel. luchtvochtigheid
Hardware Poorten 1
Industriestandaarden Compliant met IEEE 802.3 10BASE-T en IEEE 802.3u 100BASE-TX
Chipsetcode EST - EST2862B
Indicatoren 1 - LED-indicatoren Power
Verbinding
Activiteit
Prestaties Maximale overdrachtsnelheid 100 Mbit/s
Max. afstand 100 m / 330 ft
Beheer op afstand mogelijk Ja
Auto MDIX Ja
Full duplex ondersteuning Ja
Jumbo Frame Support 9K max.
Ondersteunde protocollen LPR
Software Besturingssystemen Windows® XP, 7, 8 / RT, 10
Windows Server® 2003, 2008 R2, 2012
Mac OS® 10.6 to 10.10
Speciale opmerkingen / vereisten Systeem- en kabelvereisten Printer met USB-verbinding
Exclusief USB-printerkabel
Notitie De compatibiliteit van het besturingssysteem verwijst alleen naar de meegeleverde software - de printserver zelf kan zonder software worden gebruikt op de meeste platforms die netwerkprinten ondersteunen
Verpakkingsinformatie Package Height 54 mm [2,1 in]
Package Length 21,5 cm [8,5 in]
Verzendgewicht (verpakt) 326 g [11,5 oz]
Package Width 14,9 cm [5,9 in]
Voeding Inclusief voedingsadapter Inclusief wisselstroomadapter
Ingangsspanning 100 - 240 AC
Ingangsstroom 0.25
Uitgangsspanning 5 DC
Uitgangsstroom 1A
Polariteit pin midden Positief
Stekkertype H
Vermogensopname 2
Wat wordt er meegeleverd 1 - Meegeleverd USB 2.0 netwerk LPR-printserver
universele voedingsadapter (N-A/JP, VK, EU, ANZ)
RJ45 netwerkkabel
Verkorte handleiding
Software-CD

Accessoires

SVA5H2NEUA

DC power adapter - 5V, 2A voedingsadapter

Vervang uw zoekgeraakte of defecte voedingsadapter

Uw prijs
€18,99 EUR excl. VAT
€22,98 EUR incl. VAT

Drivers/Downloads

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Firmware

Handleiding:

Datasheet

Productondersteuning

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Veelgestelde vragen (FAQ)

Installatie

To add a printer from the print server to your Windows computer, you need to use the provided software to locate the print server on your network.

Hardware requirements

  • A wired Ethernet network with DHCP (automatically assigned IP addresses).
  • A compatible USB printer.
  • A computer running Windows.

Install the hardware

  1. Use a USB A-to-B cable to connect the USB printer to the PM1115U2.
  2. Use an Ethernet patch cable to connect the PM1115U2 to a wired Ethernet network (for example, a network switch, wall jack, and so on).
  3. Connect a power supply to the print server.

Install the software

  1. Navigate to http://www.startech.com/Support and download the latest software. You can find the part number and product ID on the product packaging.

Note: Windows typically saves the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. When the download is complete, right-click the zip folder that you downloaded, click Extract All, and follow the on-screen instructions.
  1. In the list of extracted files, right-click the Network Printer Wizard Setup 2017 with Window 8.exe file and click Run as Administrator.
  1. Follow the on-screen instructions to install the driver software.

Configure the software

After the Network Printer Wizard is installed on your system you can install the printer. To install the printer, complete the following:

  1. Open the Launch Network Printer Wizard.
  2. Click Next.
  3. Select the print server from the list and click Next.
  4. Select the appropriate driver for the printer and click Next. If you cannot find the driver, use a generic PCL5/PCL6/PS driver or obtain the driver from the manufacturer of your printer.
  5. Click Finish.

Verify the installation

  1. Open Control Panel.
  2. Navigate to Devices and Printers or Printers and Other Hardware.
  3. Right-click the installed printer and click Printer Properties.
  4. Click Print Test Page.

A printer test page should be sent to your printer.

If you are using applications that do not support print server software, you can use the web interface to configure the print server for your network. To access the web interface you need to determine the IP address of the PM1115U2. This device has Dynamic Host Configuration Protocol (DHCP) enabled by default, and will be assigned an IP address by your router when connected to your network. 

You can determine the IP address of the unit in one of the following ways:

  • Use the Windows Network Printer Wizard to determine the IP address.
  • View the router's DHCP table to determine the IP address. The print server should be listed with a MAC address starting with 80:3F:5D.

To access the print server web interface, complete the following:

  1. Make sure that the PM1115U2 is on the same network as your computer.
  2. In an Internet browser, enter the IP address of the unit.
  3. Click Login.
You can now access the print server configuration and make the necessary changes for it to work on your network.

In Windows 10, to add a printer to your computer, you need to create a print server port.

Before you create the print server port, you need to configure your print server for the network. For more information about how to configure your print server, refer to the following FAQ: https://www.startech.com/faq/print-servers-pm1115u2-alternate-setup

To create a print server port, complete the following:

  1. Press the Windows key.
  2. Click Settings Devices > Bluetooth > Printers > Mouse > Add a printer The printer that I want isn't listed.
  3. Select the Add a local printer or network printer with manual settings check box, and click Next.
  4. Select Create a new port.
  5. Change the type of port to Standard TCP/IP Port, and click Next.
  6. In the Hostname or IP address field, enter the IP address of the print server, and click Next.
  7. Click CustomSettings > LPR.
  8. Under LPR Settings, enter a Queue Name. The queue name can be any set of numbers or letters.
  9. Click OK Next.
  10. Select a driver from the list, and click Next.
  11. Click Next until you are asked if you want to print a test page. To confirm that the printer was successfully added, send a test page to your printer.

In Windows 8 and Windows 8.1, to add a printer to your computer, you need to create a print server port.

Before you create the print server port, you need to configure your print server for the network. For more information about how to configure your print server, refer to the following FAQ: https://www.startech.com/faq/print-servers-pm1115u2-alternate-setup

To create a print server port, complete the following:

  1. Press the Windows key.
  2. Click Control Panel Hardware and Sound Devices and Printers Add a printer The printer that I want isn't listed.
  3. Select the Add a local printer or network printer with manual settings check box, and click Next.
  4. Select Create a new port.
  5. Change the type of port to Standard TCP/IP Port, and click Next.
  6. In the Hostname or IP address field, enter the IP address of the print server, and click Next.
  7. Click Custom > Settings > LPR.
  8. Under LPR Settings, enter a Queue Name. The queue name can be any set of numbers or letters.
  9. Click OK > Next.
  10. Select a driver from the list, and click Next.
  11. Click Next until you are asked if you want to print a test page. To confirm that the printer was successfully added, send a test page to your printer.

In Windows 7 and Windows Vista, to add a printer from the print server to your computer, you need to create a print server port.

Before you create the print server port, you need to configure your print server for the network. For more information about how to configure your print server, refer to the following FAQ: https://www.startech.com/faq/print-servers-pm1115u2-alternate-setup

To create a print server port, complete the following:

  1. Press the Windows key.
  2. Click Devices and Printers > Add a printer.
  3. Select the Add a local printer check box.
  4. Select Create a new port.
  5. Change the type of port to Standard TCP/IP Port, and click Next.
  6. In the Hostname or IP address field, enter the IP address of the print server.
  7. Click Next > Custom Settings LPR.
  8. Under LPR Settings, enter a Queue Name. The queue name can be any set of numbers or letters.
  9. Click OK Next.
  10. Select a driver from the list, and click Next.
  11. Click Next until you are asked if you want to print a test page. To confirm that the printer was successfully added, send a test page to your printer.

In the Mac OS, to add a printer to your computer, you need to create a print server port.

Before you create the print server port in the Mac OS, you need to configure your print server for the network. For more information about how to configure your print server, refer to the following FAQ: https://www.startech.com/faq/print-servers-pm1115u2-alternate-setup

To create a print server port, complete the following:

  1. Click the Apple icon.
  2. Click System Preferences Printers & Scanners.
  3. At the bottom of the list of printers, click +.
  4. On the Add screen, click IP.
  5. In the Address field, enter the IP address of the print server.
  6. In the Protocol drop-down list, click Line Printer Daemon – LPD or LPR.
  7. To add the name and location of the print server, complete the Name and Location fields.
  8. In the Use drop-down list, select the driver for the print server.
  9. Click Add.

Troubleshooting

This device has Dynamic Host Configuration Protocol (DHCP) enabled by default, and will be assigned an IP address by your router when connected to your network. 

You can determine the IP address of the unit in one of the following ways:

  • Use the Windows Network Printer Wizard to determine the IP address.
  • View the router's DHCP table to determine the IP address. The print server should be listed with a MAC address starting with 80:3F:5D.

To determine the IP address of the PM1115U2, do one of the following:

  • Use the Windows Network Printer Wizard to determine the IP address.
  • View the router's DHCP table to determine the IP address. The print server should be listed with a MAC address starting with 80:3F:5D.

 To access the print server web interface, complete the following:

  1. Make sure that the computer is on the same network as the PM1115U2. 
  2. In an Internet browser, enter the IP address of the PM1115U2.
  3. Click Login

To reset the print server to the default factory settings, complete the following:

  1. Turn on the print server and wait for it to start up. 
  2. Press and hold the Reset button for 10 seconds.
  3. Wait for the server to restart.

Hoe gaat u te werk

The Ethernet port on a wireless network print server is intended to be used for configuration and to connect to an existing network infrastructure. You cannot connect an Ethernet port on a wireless network print server to the Ethernet port on a printer. The only supported method of connecting a printer to the print server is to use a USB A to B cable. These cables can be found on StarTech.com, in the USB 2.0 Cables section.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Uitvoering en specificaties van het product zijn zonder aankondiging vatbaar voor wijzigingen.
Terug naar boven
Wacht...