Mini PCI Express Gigabit Ethernet Netwerk adapter kaart

Voeg een Gigabit RJ45-poort toe via een Mini PCI Express-slot

Productcode: ST1000SMPEX

  • Een enkele RJ45 Ethernet-poort met 10/100/1000 Mbit/s
  • Voldoet volledig aan de IEEE 802.3, 802.3u en 802.3ab-specificaties voor verbindingen met 10/100/1000 Mbit/s
  • Ondersteunt jumbo-frames tot 9 kB
Uw prijs
€58,99 EUR excl. VAT
€71,38 EUR incl. VAT
De ST1000SMPEX Mini PCI Express Gigabit Netwerkadapter/kaart voegt Gigabit-netwerkconnectiviteit toe aan een computersysteem met Mini PCI Express, zoals die op basis van Mini-ITX-moederborden. Deze Mini PCI Express Gigabit-adapter is geschikt voor gebruik in allerlei scenario’s en ondersteunt functies als NDIS5-checksum en large-send-offload voor een lager CPU-gebruik, Wake-on-LAN (WOL) en Remote Wake-up energiebeheer, jumbo-frames en VLAN-tagging. Deze hoogwaardige Mini PCI-E netwerkadapter is ideaal voor compacte of geïntegreerde systemen die niet beschikken over Gigabit-netwerkfunctionaliteit of voor het toevoegen van een netwerkverbinding zonder een hele PCI Express-slot in beslag te nemen. De kaart wordt geleverd met een low-profile / half-height bracket voor extra installatiemogelijkheden. Met 2 jaar garantie en gratis levenslange technische ondersteuning door StarTech.com

Toepassingen

  • Voeg een Gigabit-netwerkpoort toe aan een compact Mini-ITX-systeem met Mini PCI Express-slot
  • Voeg een Gigabit-netwerkpoort toe aan een Mini-ITX-systeem via Mini PCI-E in plaats van er een hele PCI-E-slot voor in beslag te nemen
  • Vervanging voor een defecte ingebouwde Gigabit Ethernet-poort

Het voordeel van StarTech.com

  • Standaard Mini PCi Express vormfactor past in vele Mini-ITX of geïntegreerde systemen
  • Gebruik minder systeembronnen met ingebouwde NDIS5-checksum , Large Send Offload en Jumbo Frames
  • Met 2 jaar garantie en gratis levenslange technische ondersteuning door StarTech.com

Partnernummers

  • Ingram Micro Belgium 1991380
  • Tech Data - Belgium 4462001
  • UPC 065030846554

Compatibility

  • Windows 8 logo
  • Windows Server 2012 logo
  • Linux logo
  • Windows 7 logo
  • Windows 10 logo
  • Windows Server 2016 logo
  • Windows Server 2019 logo
Windows® 2000, XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016, 2019
Mac OS® 10.4.x en 10.5.x
Linux 2.4.x tot 4.11.x Alleen LTS-versies

Specificaties

Warranty Information Warranty 2 Years
Connector(en) 1 - Type connector(en) Mini PCI Express x1 (52-polig)
1 - Externe poorten RJ-45
Fysieke eigenschappen Type behuizing Staal
Lengte product 51 mm [2,0 in]
Breedte product 30 mm [1,2 in]
Hoogte product 8 mm [0,3 in]
Gewicht product 6 g [0,2 oz]
Gebruiksomgeving Bedrijfstemperatuur 0°C to 55°C (32°F to 131°F)
Opslagtemperatuur -20°C to 85°C (-4°F to 185°F)
Vochtigheid 5% - 95% rel. luchtvochtigheid
Hardware Poorten 1
Interface RJ45 (gigabit Ethernet)
Bus type Mini PCI Express
Kaarttype Geïntegreerd
Industriestandaarden IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Chipsetcode Realtek - RTL8111E
Indicatoren 1 - LED-indicatoren Verbinding
Activiteit
Prestaties Compatibele netwerken 10/100/1000 Mbps
Auto MDIX Ja
Full duplex ondersteuning Ja
Promiscuous Mode Ja
MTBF 482765 Hours
Software Besturingssystemen Windows® 2000, XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016, 2019
Mac OS® 10.4.x en 10.5.x
Linux 2.4.x tot 4.11.x Alleen LTS-versies
Speciale opmerkingen / vereisten Systeem- en kabelvereisten Vrije mini PCI Express-slot en uitbreidingsslot
Verpakkingsinformatie Package Height 32 mm [1,3 in]
Package Length 17,5 cm [6,9 in]
Package Width 14,4 cm [5,7 in]
Verpakkingsaantal 1
Verzendgewicht (verpakt) 150 g [5,3 oz]
Wat wordt er meegeleverd 1 - Meegeleverd Mini PCI-E-kaart
RJ45-dochterbord
Low-profile bracket
Interne LED kabel
Interne kabel
Driver-CD
Handleiding

Accessoires

N6PATCH100GN

Cat6 netwerkkabel met snagless RJ45 connectors - 30,4 m - groen

Leg Gigabit-netwerkverbindingen met Power-over-Ethernet-functionaliteit

Uw prijs
€29,99 EUR excl. VAT
€36,29 EUR incl. VAT
C6PATCH1GN

30 cm Cat 6 gegoten RJ45 UTP Gigabit netwerkkabel - Cat6 Patchkabel groen

Leg Gigabit-netwerkverbindingen met Power-over-Ethernet-functionaliteit

Uw prijs
€1,99 EUR excl. VAT
€2,41 EUR incl. VAT
WIRC6PATBLRL

Bulk CAT6 Ethernet kabel - Stranded - CM - blauw - 305 m

Maak gigabit-netwerkverbindingen met deze hoogwaardige CAT6 kabel

Uw prijs
€257,99 EUR excl. VAT
€312,17 EUR incl. VAT
Uw prijs
€7,99 EUR excl. VAT
€9,67 EUR incl. VAT

Drivers/Downloads

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Drivers:

Handleiding:

Datasheet

Productondersteuning

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Veelgestelde vragen (FAQ)

Installatie

Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).

To install the driver:

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
  2. Select the appropriate folder for your operating system.
  3. Right-click Setup.exe. 
  4. Click Run as Administrator.

Note: If the Run as Administrator option is not available, you might be attempting to run the installer from within the zipped file. Extract the files using the instructions in Step 2.

  1. Follow the on-screen prompts to install the device drivers and restart the computer when prompted.
  2. Your computer will automatically complete the driver installation and your device should be ready to use.

Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).

To install the driver:

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Documents and Settings\your_name\My Documents\Downloads).

  1. Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
  2. Select the appropriate folder for your operating system.
  3. Double-click Setup.exe.
  4. Follow the on-screen prompts to install the device drivers and restart the computer when prompted.
  5. Your computer will automatically complete the driver installation and your device should be ready to use.

Troubleshooting

When you troubleshoot issues with a network adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Ethernet cables
  • Network devices
  • Computer system

To test your setup components, try the following:

  • Use the Ethernet cables, network devices, and computer system in another setup to see if the problem is with the components or the setup.
  • Use different Ethernet cables, network devices, and a different computer system in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.
  • Use short cables when you are testing.

When you test the Ethernet cables, network devices, and computer system, it is recommended that you do the following:

Sometimes an on-board network interface card (NIC) conflicts with a new NIC.  In these cases it is best to disable the on-board NIC.

The best way to disable your on-board NIC is to go into your BIOS and disable it there if possible.  To do this, consult your motherboard manual.

You can also disable any NIC in Windows.  Here is how you do this:

First click Start, or, in Windows 10 and 8, hold down the Windows key and press X.  Then click Control Panel.

Windows 10

  1. Click Network and Internet.
  2. Click Network and Sharing Center.
  3. On the left, click Change adapter settings.
  4. Right-click the NIC that you would like to disable and select Disable.

Windows 8

  1. Click Network and Sharing Center.
  2. On the left, click Change adapter settings.
  3. Right-click the NIC that you would like to disable and select Disable.

Windows 7

  1. Click Network and Internet.
  2. Click Network and Sharing Center.
  3. On the left, click Change adapter settings.
  4. Right-click the NIC that you would like to disable and select Disable.

Windows Vista

  1. Click Network and Sharing Center.
  2. On the left, click Manage network connections.
  3. Right-click the NIC that you would like to disable and select Disable.

Windows XP

  1. Click Network Connections.
  2. Right-click the NIC that you would like to disable and select Disable.

If you are experiencing speed or connectivity issues, it is best to set a specific speed at half or full duplex in your settings.  You can set your network adapter to perform at a certain speed, but the device that the adapter is connected to (whether it is a router, switch, or computer) must also be able to perform at the same speed.

Note: You must log in as the local administrator before you continue.

To open Device Manager:

  • Press Windows key + R.
  • Type devmgmt.msc.
  • Click OK.
  1. Open the Networking adapters section.
  2. Right-click the network adapter that you want to change and select Properties.
  3. Click the Advanced tab.
  4. Scroll down to Speed & Duplex. By default, it is set to Auto-Negotiate. Select any of the speeds that you see in the list.
  5. Click OK and restart your computer.

Hoe gaat u te werk

StarTech.com does not support a Preboot Execution Environment (PXE) as this requires third-party software. However, our devices can be used as long as the following conditions are met:

  1. The BIOS must support PXE.
  2. The BIOS must see the card.
  3. The environment must have drivers for the chipset used in the card.
  4. If using a USB networking card, the environment must have support for USB devices as well.

The drivers on our website include a Realtek Diagnostic Toolkit that you can use to easily set up a VLAN tag.

Make sure that you are logged in as the local administrator before continuing.

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Downloads). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. Once the download is complete, right-click the Realtek_PCI_GbE.zip file or the Realtek_PCIe_GbE.zip file.
  2. Select Extract All and note the location that the files will be extracted to.
  3. Select Extract. The extracted files will open automatically.
  4. In the list of extracted files, do one of the following:
  • If you are running Windows Vista/7/8, right-click the Setup.exe file and select Run as Administrator.
  • If you are running Windows XP, double-click the Setup.exe file.
  1. Follow the on-screen instructions to install the software.
  2. Open the software and under the VLAN settings, you can add, delete, or modify the VID (VLAN ID).

To confirm that Windows detects your expansion card, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

To confirm that the Mac OS detects your expansion card, complete the following:

  1. Click the Apple icon.
  2. Click About This Mac.
  3. Click More Info or System Report.
  4. Under the appropriate heading, confirm that your expansion card is listed and that there isn't an error. For example, a network card would be under Ethernet Cards.

Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Compliance and safety

Compliance letters

  • RoHS
    • Taal: English
  • WEEE
    • Taal: English

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Uitvoering en specificaties van het product zijn zonder aankondiging vatbaar voor wijzigingen.
Terug naar boven