4-Poort PCI Express gigabit netwerk adapter kaart - Quad Port PCIe Gigabit NIC

Voeg vier gigabit Ethernet-poorten toe aan een client, server of werkstation via één PCI Express-sleuf

Productcode: ST1000SPEX43

  • Voeg vier onafhankelijke gigabit RJ45-poorten toe om meerdere netwerken voor werkstations en servers met hoge bandbreedte aan te sluiten
  • Realtek RTL8111G chipset voor betrouwbare prestaties
  • Ondersteunt full-duplex flow control
Uw prijs
€240,99 EUR excl. VAT
€291,60 EUR incl. VAT

Nu kunt u vier aparte gigabit netwerkpoorten toevoegen aan uw client, server of werkstation via slechts één PCI Express-sleuf, voor aansluiting op meerdere netwerken zonder aanslag op uw budget.

Betrouwbare verbinding met meerdere netwerken

Deze 4-poorts netwerkkaart biedt krachtige connectiviteit voor uw bedrijfs- of overheidsomgeving, met ondersteuning van krachtige, 4-kanaals netwerken en een maximale throughput tot 1000 Mbps in elke richting (2000 Mbps in totaal). De netwerkadapterkaart is uitgerust met de Realtek RTL8111G chipset, die is ontworpen voor de kracht en verbeterde mogelijkheden die u nodig hebt voor betrouwbare netwerkverbindingen met uw server of computer. 

Een veelzijdige en voordelige oplossing

Deze veelzijdige 4-poorts netwerkkaart is geschikt voor vele bedrijfsapplicaties die upgrades van servers of werkstations vereisen, waardoor het multifunctioneel gibabit netwerken met vier onafhankelijke poorten wordt toegevoegd. Deze voordelige PCIe gigabit NIC is compatibel met een breed scala van besturingssystemen en is geschikt voor vele SMB- en Enterprise-applicaties zoals gevirtualiseerde omgevingen die meerdere NIC's vereisen (controleer uw VM-software voor compatibiliteit van de chipset).

De ST1000SPEX43 wordt gedekt door een tweejarige garantie en gratis levenslange technische ondersteuning van StarTech.com.

Toepassingen

  • Biedt gelijktijdige toegang tot meerdere netwerken voor desktop pc-clients, servers en werkstations met beperkt beschikbare PCI Express-sleuven
  • Maximaliseert het aantal RJ45-poorten binnen een systeem of van high-end werkstations en servers
  • Ideaal voor VM-omgevingen met meerdere besturingssystemen die gedeelde of speciale NIC's vereisen
  • Biedt redundante connectiviteit om een ononderbroken netwerkverbinding te garanderen

Partnernummers

  • Ingram Micro Belgium 3072298
  • D&D Distribution ST1000SPEX43CA
  • Tech Data - Belgium 4428874
  • UPC 065030862448

Compatibility

  • Windows 10 logo
  • Windows 8 logo
  • Windows 7 logo
  • Linux logo
  • Windows Server 2012 logo
  • Windows Server 2019 logo
  • Windows Server 2016 logo
Windows® XP, 7, 8, 8.1, 10
Windows Server® 2003, 2012, 2016, 2019
Linux Kernel 2.4.x tot 4.11.x Alleen LTS-versies

Specificaties

Warranty Information Warranty 2 Years
Connector(en) 1 - Type connector(en) PCI Express x4
4 - Externe poorten RJ-45
Fysieke eigenschappen Gewicht product 95 g [3,4 oz]
Kleur Geel
Type behuizing Staal
Lengte product 13,8 cm [5,4 in]
Breedte product 12 cm [4,7 in]
Hoogte product 1,8 cm [0,7 in]
Gebruiksomgeving Bedrijfstemperatuur 0°C to 55°C (32°F to 131°F)
Opslagtemperatuur -40°C to 75°C (-40°F to 167°F)
Vochtigheid 5% - 95% rel. luchtvochtigheid
Hardware Poorten 4
Interface RJ45 (gigabit Ethernet)
Bus type PCI Express
Kaarttype Standaard
Industriestandaarden Voldoet aan IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Chipsetcode Realtek - RTL8111G
Indicatoren 4 - LED-indicatoren Verbinding
Activiteit
Prestaties Maximale overdrachtsnelheid 2000 Mbps (full-duplex)
Compatibele netwerken 10/100/1000 Mbps
Auto MDIX Ja
Full duplex ondersteuning Ja
Jumbo Frame Support 9K max.
Promiscuous Mode Ja
Software Besturingssystemen Windows® XP, 7, 8, 8.1, 10
Windows Server® 2003, 2012, 2016, 2019
Linux Kernel 2.4.x tot 4.11.x Alleen LTS-versies
Speciale opmerkingen / vereisten Systeem- en kabelvereisten Beschikbare PCI Express x4 of hoger (x8, x16) sleuf
Verpakkingsinformatie Package Height 40 mm [1,6 in]
Package Length 14,5 cm [5,7 in]
Verzendgewicht (verpakt) 184 g [6,5 oz]
Package Width 20,9 cm [8,2 in]
Wat wordt er meegeleverd 1 - Meegeleverd PCIe gigabit netwerkkaart - 4-poorts

Drivers/Downloads

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Drivers:

Datasheet

Productondersteuning

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Veelgestelde vragen (FAQ)

Troubleshooting

When you troubleshoot issues with a network adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Ethernet cables
  • Network devices
  • Computer system

To test your setup components, try the following:

  • Use the Ethernet cables, network devices, and computer system in another setup to see if the problem is with the components or the setup.
  • Use different Ethernet cables, network devices, and a different computer system in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.
  • Use short cables when you are testing.

When you test the Ethernet cables, network devices, and computer system, it is recommended that you do the following:

Sometimes an on-board network interface card (NIC) conflicts with a new NIC.  In these cases it is best to disable the on-board NIC.

The best way to disable your on-board NIC is to go into your BIOS and disable it there if possible.  To do this, consult your motherboard manual.

You can also disable any NIC in Windows.  Here is how you do this:

First click Start, or, in Windows 10 and 8, hold down the Windows key and press X.  Then click Control Panel.

Windows 10

  1. Click Network and Internet.
  2. Click Network and Sharing Center.
  3. On the left, click Change adapter settings.
  4. Right-click the NIC that you would like to disable and select Disable.

Windows 8

  1. Click Network and Sharing Center.
  2. On the left, click Change adapter settings.
  3. Right-click the NIC that you would like to disable and select Disable.

Windows 7

  1. Click Network and Internet.
  2. Click Network and Sharing Center.
  3. On the left, click Change adapter settings.
  4. Right-click the NIC that you would like to disable and select Disable.

Windows Vista

  1. Click Network and Sharing Center.
  2. On the left, click Manage network connections.
  3. Right-click the NIC that you would like to disable and select Disable.

Windows XP

  1. Click Network Connections.
  2. Right-click the NIC that you would like to disable and select Disable.

If you are experiencing speed or connectivity issues, it is best to set a specific speed at half or full duplex in your settings.  You can set your network adapter to perform at a certain speed, but the device that the adapter is connected to (whether it is a router, switch, or computer) must also be able to perform at the same speed.

Note: You must log in as the local administrator before you continue.

To open Device Manager:

  • Press Windows key + R.
  • Type devmgmt.msc.
  • Click OK.
  1. Open the Networking adapters section.
  2. Right-click the network adapter that you want to change and select Properties.
  3. Click the Advanced tab.
  4. Scroll down to Speed & Duplex. By default, it is set to Auto-Negotiate. Select any of the speeds that you see in the list.
  5. Click OK and restart your computer.

Hoe gaat u te werk

StarTech.com does not support a Preboot Execution Environment (PXE) as this requires third-party software. However, our devices can be used as long as the following conditions are met:

  1. The BIOS must support PXE.
  2. The BIOS must see the card.
  3. The environment must have drivers for the chipset used in the card.
  4. If using a USB networking card, the environment must have support for USB devices as well.

The drivers on our website include a Realtek Diagnostic Toolkit that you can use to easily set up a VLAN tag.

Make sure that you are logged in as the local administrator before continuing.

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Downloads). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. Once the download is complete, right-click the Realtek_PCI_GbE.zip file or the Realtek_PCIe_GbE.zip file.
  2. Select Extract All and note the location that the files will be extracted to.
  3. Select Extract. The extracted files will open automatically.
  4. In the list of extracted files, do one of the following:
  • If you are running Windows Vista/7/8, right-click the Setup.exe file and select Run as Administrator.
  • If you are running Windows XP, double-click the Setup.exe file.
  1. Follow the on-screen instructions to install the software.
  2. Open the software and under the VLAN settings, you can add, delete, or modify the VID (VLAN ID).

To confirm that Windows detects your expansion card, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Uitvoering en specificaties van het product zijn zonder aankondiging vatbaar voor wijzigingen.
Wacht...
Terug naar boven