USB 3.0 naar gigabit ethernet netwerk adapter met ingebouwde 2-poorts USB hub

Voeg gigabit Ethernet-verbindingen en twee USB 3.0 poorten toe aan uw laptop of tablet via één USB-poort

Productcode: USB31000S2H

  • Krijg volledige gigabit bandbreedteondersteuning voor uw laptop of tablet via een USB 3.0 hostverbinding
  • Sluit extra randapparaten aan met twee USB 3.0 poorten
  • Native stuurprogramma ondersteuning (Windows, Mac en Chrome OS)
Uw prijs
€52,99 EUR excl. VAT
€64,12 EUR incl. VAT

Voeg krachtige netwerktoegang toe aan uw tablet, Ultrabook™ of laptop, zelfs als deze geen geïntegreerde RJ45-poort heeft. Deze USB 3.0 naar gigabit netwerkadapter geeft u vaste netwerktoegang - en biedt twee USB 3.0 passthrough poorten, waardoor u extra USB-apparaten kunt aansluiten.

Krachtige gigabit netwerkverbindingen

Ideaal voor gebruik op kantoor of thuis, ondersteunt de USB 3.0 netwerkadapter de volledige gigabit bandbreedte door de snelheid van USB 3.0 (5 Gbps) te benutten. U hebt snel toegang tot zeer grote bestanden via een gigabit netwerk, waardoor u elke dag weer waardevolle tijd bespaart.

Eenvoudige installatie dankzij native stuurprogrammaondersteuning

Gebruiksklaar in een mum van tijd. Steek deze Ethernet-kabeladapter gewoon in de USB-poort van uw laptop en maak verbinding met uw netwerk. De netwerkadapter-chipset biedt native stuurprogramma ondersteuning, zodat u zich geen zorgen meer hoeft te maken over het installeren van extra software.

Sluit uw USB-apparaten aan op de extra poorten

Verbeter de mogelijkheden van uw laptop of tablet door aansluiting van USB-apparaten zoals printers of externe solid-state drive- of harde-schijfbehuizingen via de twee USB 3.0 poorten. U kunt ook uw muis, toetsenbord, flashdrive of andere laagvermogen USB-apparaten aansluiten, zonder dat extra vermogen vereist is.

Compact en lichtgewicht voor perfecte mobiliteit

Deze compacte en draagbare USB gigabit netwerkadapter is de ideale desktop netwerkadapter of laptopaccessoire. U hoeft geen voedingsadapter meer mee te nemen om de adapter te gebruiken, omdat deze adapter direct vanaf de USB-hostpoort wordt gevoed.

De USB31000S2H wordt gedekt door een 2-jarige garantie en gratis levenslange technische ondersteuning van StarTech.com.

Toepassingen

  • Ideaal voor een Ultrabook, tablet of slanke laptop die geen RJ45-poort heeft
  • De ideale vervanging voor een oudere LAN-poort
  • Sluit randapparaten zoals printers of externe SSD-/HDD-behuizingen aan op de geïntegreerde 2-poorts USB hub
  • Neem de adapter mee met uw laptop als een draagbare acessoire met USB-voeding

Partnernummers

  • Ingram Micro Belgium 3022393
  • D&D Distribution USB31000S2HCA
  • Tech Data - Belgium 4428640
  • UPC 065030862400

Compatibility

  • Mac OS X El Capitan (10.11) logo
  • Chrome OS logo
  • Windows 8 logo
  • Windows 7 logo
  • Linux logo
  • Windows Server 2012 logo
  • Windows 10 logo
  • macOS Sierra (10.12) logo
  • Windows Server 2016 logo
  • macOS Mojave (10.14) logo
  • Windows Server 2019 logo
  • macOS High Sierra (10.13) logo
  • macOS Catalina (10.15) logo
  • macOS Big Sur (11.0) logo
Windows® XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2016, 2019
Mac OS X® 10.7 tot 10.14 VLAN Tagging wordt momenteel niet ondersteund in het Mac-besturingssysteem
Linux kernel 2.6.25 tot 4.11.x Alleen LTS-versies Chrome OS®️

Specificaties

Warranty Information Warranty 2 Years
Connector(en) 1 - Type connector(en) USB Type-A (9-polig) USB 3.0 (5 Gbps)
RJ-45
2 - Type connector(en) USB Type-A (9-polig) USB 3.0 (5 Gbps)
Fysieke eigenschappen Form Factor Aangesloten kabel
Gewicht product 25,9 g [0,9 oz]
Kleur Zwart
Type behuizing Kunststof
Lengte product 25,5 cm [10,0 in]
Breedte product 37 mm [1,5 in]
Hoogte product 17 mm [0,7 in]
Gebruiksomgeving Bedrijfstemperatuur 0°C to 70°C (32°F to 158°F)
Opslagtemperatuur -10°C to 55°C (14°F to 131°F)
Vochtigheid Vochtigheidsbereik tijdens opslag: 5% ~ 90% RV (niet-condenserend) Vochtigheidsbereik tijdens gebruik: 50% ~ 80% RV
Hardware Poorten 1
Interface USB 3.0
Bus type USB 3.0
USB pass-through Ja
Industriestandaarden IEEE 802.3 10BASE-T, IEEE 802.3ab 1000BASE-T, IEEE 802.3u 100BASE-TX en IEEE 802.3X full-duplex
Chipsetcode Realtek - RTL8153
Prestaties Maximale overdrachtsnelheid 5 Gbps - USB 3.0 / 2 Gbps - Full-duplex gigabit Ethernet
Type en snelheid USB 3.0 - 5 Gbit/s
Overspanningsbeveiliging 5 kV
Compatibele netwerken 10/100/1000 Mbps
Auto MDIX Ja
Full duplex ondersteuning Ja
Jumbo Frame Support 9K max.
Algemene specificaties Max. stroomverbruik: 150mA
MTBF 637,901 uren
Software Besturingssystemen Windows® XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2016, 2019
Mac OS X® 10.7 tot 10.14 VLAN Tagging wordt momenteel niet ondersteund in het Mac-besturingssysteem
Linux kernel 2.6.25 tot 4.11.x Alleen LTS-versies Chrome OS®️
Verpakkingsinformatie Verzendgewicht (verpakt) 106 g [3,7 oz]
Package Length 14,2 cm [5,6 in]
Package Width 17 cm [6,7 in]
Package Height 30 mm [1,2 in]
Voeding Vermogensopname Max 1092mA
Wat wordt er meegeleverd 1 - Meegeleverd USB 3.0 naar gigabit netwerkadapter
Handleiding

Accessoires

ECUSB3S22

2-poorts ExpressCard SuperSpeed USB 3.0 kaartadapter met UASP-ondersteuning

Voeg 2 USB 3.0-poorten toe aan uw laptop via een ExpressCard-slot

Uw prijs
€39,99 EUR excl. VAT
€48,39 EUR incl. VAT
Niet meer leverbaar
PEXUSB3S400

PCI Express PCIe SuperSpeed USB 3.0 controllerkaartadapter met 4 onafhankelijke poorten met USAP - SATA-voeding

Voeg via een PCI-Express-sleuf 4 onafhankelijke SuperSpeed USB 3.0-poorten aan uw PC toe

Uw prijs
€138,99 EUR excl. VAT
€168,18 EUR incl. VAT

Drivers/Downloads

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Drivers:

Datasheet

Productondersteuning

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Veelgestelde vragen (FAQ)

Installatie

Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).

To install the driver:

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
  2. Select the appropriate folder for your operating system.
  3. Right-click Setup.exe. 
  4. Click Run as Administrator.

Note: If the Run as Administrator option is not available, you might be attempting to run the installer from within the zipped file. Extract the files using the instructions in Step 2.

  1. Follow the on-screen prompts to install the device drivers and restart the computer when prompted.
  2. Your computer will automatically complete the driver installation and your device should be ready to use.

Troubleshooting

When you troubleshoot issues with a network adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Ethernet cables
  • Network devices
  • Computer system

To test your setup components, try the following:

  • Use the Ethernet cables, network devices, and computer system in another setup to see if the problem is with the components or the setup.
  • Use different Ethernet cables, network devices, and a different computer system in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.
  • Use short cables when you are testing.

When you test the Ethernet cables, network devices, and computer system, it is recommended that you do the following:

Sometimes an on-board network interface card (NIC) conflicts with a new NIC.  In these cases it is best to disable the on-board NIC.

The best way to disable your on-board NIC is to go into your BIOS and disable it there if possible.  To do this, consult your motherboard manual.

You can also disable any NIC in Windows.  Here is how you do this:

First click Start, or, in Windows 10 and 8, hold down the Windows key and press X.  Then click Control Panel.

Windows 10

  1. Click Network and Internet.
  2. Click Network and Sharing Center.
  3. On the left, click Change adapter settings.
  4. Right-click the NIC that you would like to disable and select Disable.

Windows 8

  1. Click Network and Sharing Center.
  2. On the left, click Change adapter settings.
  3. Right-click the NIC that you would like to disable and select Disable.

Windows 7

  1. Click Network and Internet.
  2. Click Network and Sharing Center.
  3. On the left, click Change adapter settings.
  4. Right-click the NIC that you would like to disable and select Disable.

Windows Vista

  1. Click Network and Sharing Center.
  2. On the left, click Manage network connections.
  3. Right-click the NIC that you would like to disable and select Disable.

Windows XP

  1. Click Network Connections.
  2. Right-click the NIC that you would like to disable and select Disable.

If you are experiencing speed or connectivity issues, it is best to set a specific speed at half or full duplex in your settings.  You can set your network adapter to perform at a certain speed, but the device that the adapter is connected to (whether it is a router, switch, or computer) must also be able to perform at the same speed.

Note: You must log in as the local administrator before you continue.

To open Device Manager:

  • Press Windows key + R.
  • Type devmgmt.msc.
  • Click OK.
  1. Open the Networking adapters section.
  2. Right-click the network adapter that you want to change and select Properties.
  3. Click the Advanced tab.
  4. Scroll down to Speed & Duplex. By default, it is set to Auto-Negotiate. Select any of the speeds that you see in the list.
  5. Click OK and restart your computer.

If the USB device does not work after your computer has been in extended hibernation, it is likely that Windows has automatically turned off the USB Root hub to save power. 

The steps below outline how to configure the USB root hub to stay on during hibernation, to prevent this from happening.
 

Windows 10 / 8

  1. On your keyboard, press the Windows key + X and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows 7 / Vista

  1. Click the Start button and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows XP

  1. On your desktop, right-click the My Computer icon and select Properties.
  2. Click the Device Manager tab.
  3. Expand Universal Serial Bus controllers by clicking the arrow to the left of it.
  4. Right-click the first USB Root Hub device and select Properties.
  5. Click the Power Management tab.
  6. Clear the box next to Allow the computer to turn off this device to save power.
  7. Click OK to apply the setting.
  8. Repeat steps 4-7 for any remaining devices in the Universal Serial Bus Controllers section with “Root Hub” in the name.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Hoe gaat u te werk

StarTech.com does not support a Preboot Execution Environment (PXE) as this requires third-party software. However, our devices can be used as long as the following conditions are met:

  1. The BIOS must support PXE.
  2. The BIOS must see the card.
  3. The environment must have drivers for the chipset used in the card.
  4. If using a USB networking card, the environment must have support for USB devices as well.

To confirm that Windows detects your USB device, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

To confirm that the Mac OS detects your USB device, complete the following:

  1. Click the Apple icon.
  2. Click About This Mac.
  3. Click More Info or System Report.
  4. Under the appropriate heading, confirm that your USB device is listed and that there isn't an error. For example, a network card would be under Ethernet Cards.

You may need to refresh the System Information page after you plug in your device.  To do so, press Command R with the System Information page open.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Uitvoering en specificaties van het product zijn zonder aankondiging vatbaar voor wijzigingen.
Terug naar boven
Wacht...