Productcode: EC400USB
This 4 Port ExpressCard USB 2.0 Adapter Card adds four USB 2.0 compliant ports to a host computer using an available ExpressCard slot, and is backward compatible with the USB 1.1 specification, for use with older USB peripherals.
The ExpressCard adapter can be installed in seconds, and offers combined hi-speed USB 2.0 data transfer rates of up to 480Mbps - ensuring a reliable and efficient connection with MP3 players, digital cameras, external CD/DVD-ROM drives, or virtually any USB device you need to connect to your laptop computer.
Designed to provide reliable USB connections, this ExpressCard adapter is backed by StarTech.com's lifetime warranty and free lifetime technical support.
Warranty Information | Warranty | Lifetime |
---|---|---|
Connector(en) | 1 - Type connector(en) | ExpressCard (34mm) |
4 - Externe poorten | USB Type-A (4-polig) USB 2.0 | |
Fysieke eigenschappen | Lengte product | 11,5 cm [4,5 in] |
Breedte product | 34 mm [1,3 in] | |
Hoogte product | 21 mm [0,8 in] | |
Gewicht product | 220 g [7,8 oz] | |
Hardware | Poorten | 4 |
Interface | USB 2.0 | |
Bus type | ExpressCard | |
Kaarttype | 34mm ExpressCard | |
Chipsetcode | Genesys Logic - GL850A | |
Prestaties | Maximale overdrachtsnelheid | 480 Mbps |
Software | Besturingssystemen | Windows® 10 (32/64), 8 / 8.1 (32/64), 7 (32/64), Vista (32/64), XP (32/64) Windows Server® 2012, 2008 R2, 2003 Mac OS® 10.x (tested up to 10.11) Linux 2.6 and later (tested up to 3.5) |
Verpakkingsinformatie | Package Length | 20,7 cm [8,1 in] |
Package Width | 14 cm [5,5 in] | |
Package Height | 38 mm [1,5 in] | |
Verzendgewicht (verpakt) | 120 g [4,2 oz] | |
Voeding | Inclusief voedingsadapter | Niet meegeleverd (niet vereist voor standaardapplicaties) |
Ingangsspanning | 115V AC | |
Uitgangsspanning | 5 DC | |
Uitgangsstroom | 2.6A | |
Polariteit pin midden | Positief | |
Stekkertype | H | |
Wat wordt er meegeleverd | 1 - Meegeleverd | 4 Port ExpressCard USB 2.0 Hub |
Instruction Manual |
Zorgt voor een veilige plaatsing van 34mm ExpressCards in 54mm ExpressCard-slots
Wij staan altijd klaar om al uw vragen te beantwoorden.
Chat Live (opens in new window)Wij staan altijd klaar om al uw vragen te beantwoorden.
Chat Live (opens in new window)If the USB device does not work after your computer has been in extended hibernation, it is likely that Windows has automatically turned off the USB Root hub to save power.
The steps below outline how to configure the USB root hub to stay on during hibernation, to prevent this from happening.
Windows 10 / 8
Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.
Windows 7 / Vista
Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.
Windows XP
Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.
When you troubleshoot issues with a USB controller card, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
USB cables
USB devices
USB controller card
To test your setup components, try the following:
Use the USB cable, device, and controller card in another setup to see if the problem is with the components or the setup.
Use a different USB cable, device, and controller card in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cables, it is recommended that you do the following:
Test each cable individually.
Use short cables when you are testing.
When you test the USB device and controller card, it is recommended that you do the following:
Press the Windows key + R, type devmgmt.msc, and press Enter to open Device Manager. Check to see if your device is listed under Universal Serial Bus controllers.
If you do not see the USB controller card listed in Device Manager please see this FAQ: https://www.startech.com/support/faqs/technical-support?topic=expansion-cards#pci-pcie-cannot-boot-os-or-detect-windows.
If the device is listed with an error, follow the instructions on the website to reinstall the drivers.
To confirm that Windows detects your expansion card, complete the following:
Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.
To confirm that the Mac OS detects your expansion card, complete the following:
You may need to refresh the System Information page after you plug in your device. To do so, press Command + R with the System Information page open.
Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.