Niet meer leverbaar

16-poort FTDI USB naar Seriële Adapter Hub Rackmontage - RS232 Multiplexer

Zet een enkele USB-poort om naar 16 RS232 seriële poorten in een robuust uitgevoerde, industriële in een rack monteerare behuizing

Productcode: ICUSB23216F

  • 16 RS232-interfaces via een enkele USB-poort
  • 921,6 kbit/s baudrate per poort
  • FIFO-buffer van 256 Byte voor zenden / 128 Byte voor ontvangen
De ICUSB23216F 16-poort FTDI USB Seriële Hub (FTDI) voegt 16 RS232 seriële poorten toe met overdrachtsnelheden tot 921,6 kbit/s voor bediening door middel van een desktopcomputer of laptop via een enkele USB-poort. Deze duurzame, robuuste USB-naar-RS232-hub is ondergebracht in een volledig metalen behuizing die past in standaard 19-inch serverracks – een nette industriële COM-poort-oplossing met ondersteuning voor een uitgebreid temperatuurbereik (-40° C tot 85° C) dat zorgt voor een betrouwbaar gebruik in de meest veeleisende omgevingen. De adapter behoudt de waarden van de toegewezen seriële COM-poorten, waardoor dezelfde waarden door de adapter automatisch weer aan de poorten worden toegewezen in het geval deze worden losgekoppeld en opnieuw op de computer worden aangesloten. De USB seriële hub wordt geleverd met een netstroomadapter en kan ook worden gevoed via aansluitblok. Het beschikt over een betrouwbare chipset voor de omzetting van FTDI USB naar serieel, die eenvoudige installatie mogelijk maakt onder een breed scala van besturingssystemen, waaronder Windows®, Linux en Mac OS. Met 2 jaar garantie en gratis levenslange technische ondersteuning door StarTech.com

Toepassingen

  • Ideaal voor industriële automatisering op fabrieksvloeren/productielijnen
  • Volledige controle over de seriële componenten in uw serverruimte vanaf een enkel apparaat
  • Bediening/controle van bewakingssystemen en beveiligingscamera’s
  • Zelfbedieningsautomaten en seriële apparaten (in supermarkt, op vliegveld), zoals weegschalen, touchscreens, magnetische kaart-lezers, barcodescanners, bonprinters, labelprinters
  • POS-toepassingen voor het aansturen van toetsenborden, kassalades, bonprinters, kaartlezers, weegschalen en verhoogde uitstallingen
  • Werkplekken aan de balie van een bank in standaard of low profile versies, voor het aansturen van de seriële apparatuur zoals kassalades, kaartlezers, printers, toetsenborden / pinapparaten, pentabletten

Het voordeel van StarTech.com

  • Groot temperatuurbereik zodat het apparaat ook in ruwe omstandigheden goed kan blijven werken
  • Het toevoegen van 16 poorten via een enkele USB-poort zorgt voor een optimale bediening van verscheidene RS232 seriële apparaten zonder meerdere I/O-kaarten te hoeven aanschaffen
  • Duurzame, volledig metalen behuizing voor gebruik in industriële omgevingen (rackmontage)

Partnernummers

  • UPC 065030844789

Compatibility

  • Windows 8 logo
  • Mac OS X Mavericks (10.9) logo
  • Linux logo
  • Windows Server 2012 logo
  • Windows 7 logo
  • Mac OS X Yosemite (10.10) logo
  • Windows 10 logo
  • Windows 11 logo
  • Mac OS X El Capitan (10.11) logo
  • macOS Sierra (10.12) logo
  • Windows Server 2016 logo
  • macOS Big Sur (11.0) logo
  • macOS Monterey (12.0) logo
Windows® CE (4.2, 5.0, 6.0), XP Embedded, 98SE, 2000, XP, Vista, 7, 8, 8.1, 10, 11
Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016
macOS 10.6 tot 10.12, 11.0
Linux 2.4.x tot 4.11.x Alleen LTS-versies

Specificaties

Warranty Information Warranty 2 Years
Connector(en) 16 - Type connector(en) DB-9 (9 pin, D-Sub)
1 - Type connector(en) USB B (4 pin)
Fysieke eigenschappen Kleur Black
Type behuizing Steel
Lengte product 43 cm [16,9 in]
Breedte product 12 cm [4,7 in]
Hoogte product 4,5 cm [1,8 in]
Gewicht product 1,5 kg [3,4 lb]
Gebruiksomgeving Bedrijfstemperatuur -40°C to 85°C (-40°F to 185°F)
Opslagtemperatuur -65°C to 150°C (-85°F to 302°F)
Vochtigheid 20~80% RH (Non-condensing)
Hardware Poorten 16
Interface Serial
Bus type USB 2.0
Poorttype External Hub
Chipsetcode FTDI - FT232RL
Indicatoren 16 - LED-indicatoren Data ontvangen
Data zenden
Prestaties Maximale overdrachtsnelheid 480 Mbit/s
Seriële protocol RS-232
Max. baudrate 921.6 Kbps
Databits 7, 8
FIFO 256 Bytes
Pariteit Odd, Even, Mark, Space, None
Stopbits 1, 2
Software Besturingssystemen Windows® CE (4.2, 5.0, 6.0), XP Embedded, 98SE, 2000, XP, Vista, 7, 8, 8.1, 10, 11
Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016
macOS 10.6 tot 10.12, 11.0
Linux 2.4.x tot 4.11.x Alleen LTS-versies
Verpakkingsinformatie Package Length 44,8 cm [17,6 in]
Package Width 21,5 cm [8,5 in]
Package Height 61 mm [2,4 in]
Verzendgewicht (verpakt) 2,5 kg [5,5 lb]
Voeding Inclusief voedingsadapter AC Adapter Included
Ingangsspanning 100 - 240 AC
Ingangsstroom 0.8A
Uitgangsspanning 12V DC
Uitgangsstroom 2.5A
Polariteit pin midden Positive
Stekkertype N
Vermogensopname 30
Wat wordt er meegeleverd 1 - Meegeleverd 16-poort USB naar RS232 Hub
USB-kabel
Universele voedingsadapter: is geschikt voor NA/EU/GB wanneer gekocht in NA/EU/GB; is geschikt voor Australië en Nieuw-Zeeland wanneer gekocht in Australië en Nieuw-Zeeland.
Driver-CD
Handleiding
2 - Meegeleverd DIN-montagebeugels
Oren voor rackmontage

Drivers/Downloads

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Drivers:

Handleiding:

Datasheet

Productondersteuning

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Veelgestelde vragen (FAQ)

Installatie

Some driver installation packages may require you to disable driver signature enforcement in Windows 8, which will allow unsigned driver packages to be installed on your system.

Note: Before you continue, save any open documents and close all open programs.

To disable driver signature enforcement, complete the following:

  1. Press the Windows key + C.
  2. Click Settings > Change PC Settings.
  3. In the left pane, click General.
  4. In the right pane, under Advanced startup, click Restart now.

When your system finishes restarting, complete the following:

  1. Click Troubleshoot > Advanced options > Startup Settings > Restart.
  2. Press 7.

When your computer restarts, driver signature enforcement will be disabled and you can install your drivers.

Note: When you restart your computer after you install your drivers, driver signature enforcement will be enabled again. This does not prevent your newly installed drivers from working, but does prevent any other unsigned drivers from being installed until driver signature enforcement is disabled.

Some driver installation packages may require you to disable driver signature enforcement in Windows 8.1, which will allow unsigned driver packages to be installed on your system.

Note: Before you continue, save any open documents and close all open programs.

To disable driver signature enforcement, complete the following:

  1. Press the Windows key + C.
  2. Click Settings > Change PC Settings.
  3. In the left pane, click Update & Recovery.
  4. In the left pane, click Recovery.
  5. Under Advanced startup, click Restart now.

When your system finishes restarting, complete the following:

  1. Click Troubleshoot > Advanced options > Startup Settings > Restart.
  2. Press 7.

When your computer restarts, driver signature enforcement will be disabled and you can install your drivers.

Note: When you restart your computer after you install your drivers, driver signature enforcement will be enabled again. This does not prevent your newly installed drivers from working, but does prevent any other unsigned drivers from being installed until driver signature enforcement is disabled.­­­­­­­

You may need to disable Driver Signature Enforcement in Windows 10 to use some driver installation packages. When you disable this feature, you can install unsigned driver packages on your computer.

Note: Before you continue, save any open documents and close all of your programs. You will need to restart your computer to disable Driver Signature Enforcement.

To disable Driver Signature Enforcement, complete the following:

  1. Click the Windows icon in the taskbar.
  2. Click Power.
  3. Press and hold the Shift key and click Restart.

After your computer finishes restarting, complete the following:

  1. Click Troubleshoot Advanced Options Startup Settings > Restart.
  2. Press 7.   

When your computer finishes restarting, Driver Signature Enforcement will be disabled and you can install the drivers.

Note: When you restart your computer after you install your drivers, driver signature enforcement will be enabled again. This does not prevent your newly installed drivers from working, but does prevent any other unsigned drivers from being installed until driver signature enforcement is disabled.­­­­­­­

Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).

To install the driver:

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
  2. Open the appropriate folder for your operating system.
  3. Right-click Setup.exe. 
  4. Click Run as Administrator.

Note: If the Run as Administrator option is not available, you might be attempting to run the installer from within the zipped file. Extract the files using the instructions in Step 2.

  1. Follow the on-screen prompts to install the device drivers and restart the computer when prompted.
  2. Your computer will automatically complete the driver installation and your device should be ready to use.

Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).

To install the driver:

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Documents and Settings\your_name\My Documents\Downloads).

  1. Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
  2. Open the appropriate folder for your operating system.
  3. Double-click Setup.exe.
  4. Follow the on-screen prompts to install the device drivers and restart the computer when prompted.
  5. Your computer will automatically complete the driver installation and your device should be ready to use.

Troubleshooting

When you troubleshoot issues with a serial device, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Serial cables

  • Serial ports

  • Serial devices

To test your setup components, try the following:

  • Use the serial cable, serial port, and serial device in another setup to see if the problem is with the components or the setup.

  • Use a different serial cable, serial port, and serial device in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the serial ports and serial device, it is recommended that you do the following:

Note: Some serial devices work only if the COM port number is between a certain range. For example, COM1 to COM4.

To check whether or not an RS-232 serial port is working, perform an RS-232 loopback test by doing the following:

  1. If your serial port is not female, convert it by taking a female/female cable or gender changer and plugging it into the serial port.
  2. Take a metal paperclip or wire and cross pins 2 and 3. If you look closely at the female end, the pins should be numbered.
  3. Open a telnet session on the COM port number of the device that you are testing. To find out the COM port number, refer to the following FAQ: https://www.startech.com/faq/com-port-listing-windows.

Note: To open a telnet session on the COM port, you need a telnet client like PuTTY or Hyper Terminal. Windows XP comes with Hyper Terminal.

  1. When the session is open, anything you type into it you should see. The loopback test fails when you cannot see what you are typing.

If the loopback test fails, make sure that the serial cable or gender changer that you are using works and that the adapter is in the correct port. 

You can check multiple ports at the same time by opening multiple sessions, putting the loopback adapter on one port, and trying to type into each session.  When you can see what you are typing, you know that the COM port is working and you can see which port number the physical serial port is. Close the window for the port that you just tested to speed up the testing of the remaining serial ports.

If the USB device does not work after your computer has been in extended hibernation, it is likely that Windows has automatically turned off the USB Root hub to save power. 

The steps below outline how to configure the USB root hub to stay on during hibernation, to prevent this from happening.
 

Windows 10 / 8

  1. On your keyboard, press the Windows key + X and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows 7 / Vista

  1. Click the Start button and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows XP

  1. On your desktop, right-click the My Computer icon and select Properties.
  2. Click the Device Manager tab.
  3. Expand Universal Serial Bus controllers by clicking the arrow to the left of it.
  4. Right-click the first USB Root Hub device and select Properties.
  5. Click the Power Management tab.
  6. Clear the box next to Allow the computer to turn off this device to save power.
  7. Click OK to apply the setting.
  8. Repeat steps 4-7 for any remaining devices in the Universal Serial Bus Controllers section with “Root Hub” in the name.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Hoe gaat u te werk

To confirm that Windows detects your USB device, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

To confirm that the Mac OS detects your USB device, complete the following:

  1. Click the Apple icon.
  2. Click About This Mac.
  3. Click More Info or System Report.
  4. Under the appropriate heading, confirm that your USB device is listed and that there isn't an error. For example, a network card would be under Ethernet Cards.

You may need to refresh the System Information page after you plug in your device.  To do so, press Command R with the System Information page open.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Uitvoering en specificaties van het product zijn zonder aankondiging vatbaar voor wijzigingen.
Wacht...
Terug naar boven