Niet meer leverbaar

2-poort Industriële USB naar Seriële RJ45 Adapter - Wandmontage en DIN-rail

Voeg twee RS232 seriële RJ45-aansluitingen toe aan een PC of server via USB met deze op een DIN-rail of aan de wand monteerbare adapter

Productcode: ICUSB2322RJ

  • Voegt 2 RS232 seriële RJ45-connectoren toe via een enkele USB-poort
  • Inclusief beugels voor DIN-rail (Top Hat) en wandmontage
  • Ondersteunt seriële overdrachtsnelheden tot 921.6 kbit/s
Met de ICUSB2322RJ 2-poort Industriële USB naar Seriële RJ45 Adapter (wandmontage en DIN-rail) kunt u twee RS232 seriële verbindingen via RJ45-poorten toevoegen aan een PC of server via een enkele USB 2.0-poort. De RS232 naar RJ45 adapter beschikt over COM-behoud zodat de toekenning van uw poortnummers wordt bewaard en ondersteunt seriële overdrachtsnelheden tot 921 kbit/s. De meegeleverde DIN-rail clips (Top Hat) en beugels voor wandmontage bieden eenvoudige oplossingen voor een ruimtebesparende installatie, en de robuuste metalen behuizing zorgt voor duurzaamheid in ruwe industriële omgevingen. Met 2 jaar garantie en gratis levenslange technische ondersteuning door StarTech.com

Toepassingen

  • Perfect voor IT-beheerders die legacy-functionaliteit toe willen voegen aan moderne laptops, pc's en servers die niet zijn voorzien van een geïntegreerde RS232-poort
  • Sluit industriële of voertuigsensoren en -apparatuur aan (bewaking en beveiliging)

Het voordeel van StarTech.com

  • Robuuste, geheel metalen behuizing met meegeleverde DIN-rail clips en beugels voor wandmontage voor veelzijdige installatiemogelijkheden en extra duurzaamheid
  • Meerdere poorten met COM-behoud zorgen voor een probleemloze bediening van diverse seriële apparaten zonder dat u steeds hoeft te onthouden waar ze de laatste keer waren aangesloten
  • De USB naar RJ45 seriële adapter wordt gevoed via de USB-aansluiting, zodat er geen grote externe adapters of stopcontacten nodig zijn

Partnernummers

  • Ingram Micro Belgium 1991362
  • UPC 065030846608

Compatibility

  • Windows 8 logo
  • Linux logo
  • Windows Server 2012 logo
  • Windows 7 logo
  • Windows 10 logo
  • Windows 11 logo
  • Mac OS X El Capitan (10.11) logo
  • macOS Sierra (10.12) logo
  • Windows Server 2016 logo
  • macOS Mojave (10.14) logo
  • macOS High Sierra (10.13) logo
  • macOS Big Sur (11.0) logo
  • macOS Monterey (12.0) logo
Windows® CE (4.2, 5.0, 6.0), XP Embedded, 98SE, 2000, XP, Vista, 7, 8, 8.1, 10, 11
Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016
macOS 10.6 tot 10.14, 11.0
Linux 2.4.x tot 4.11.x Alleen LTS-versies

Specificaties

Warranty Information Warranty 2 Years
Connector(en) 2 - Type connector(en) RJ-45
1 - Type connector(en) USB B (4 pin)
Fysieke eigenschappen Kleur Black
Type behuizing Steel
Lengte product 65 mm [2,6 in]
Breedte product 42 mm [1,7 in]
Hoogte product 2 cm [0,8 in]
Gewicht product 78 g [2,8 oz]
Gebruiksomgeving Bedrijfstemperatuur 0°C to 55°C (32°F to 131°F)
Opslagtemperatuur -20°C to 85°C (-4°F to 185°F)
Vochtigheid 5% - 95% rel. luchtvochtigheid
Hardware Poorten 2
Interface Serial
Bus type USB 2.0
Poorttype External Hub
Chipsetcode FTDI - FT232R
Prestaties Seriële protocol RS-232
Max. baudrate 921.6 Kbps
Databits 7, 8
FIFO 128 Bytes
Pariteit Odd, Even, Mark, Space, None
Stopbits 1, 2
Software Besturingssystemen Windows® CE (4.2, 5.0, 6.0), XP Embedded, 98SE, 2000, XP, Vista, 7, 8, 8.1, 10, 11
Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016
macOS 10.6 tot 10.14, 11.0
Linux 2.4.x tot 4.11.x Alleen LTS-versies
Verpakkingsinformatie Package Height 41 mm [1,6 in]
Package Length 21,1 cm [8,3 in]
Package Width 14,4 cm [5,7 in]
Verzendgewicht (verpakt) 0,3 kg [0,6 lb]
Voeding Inclusief voedingsadapter USB-Powered
Wat wordt er meegeleverd 1 - Meegeleverd 2-poort USB naar seriële RJ45-adapter
Wandmontagebeugel
USB A naar B kabel
Driver-CD
Handleiding
2 - Meegeleverd DIN-rail clips

Accessoires

ADJDINKIT

Verstelbare DIN-rail Rack Montageset met Top Hat/Mini/G-rails

Monteer op eenvoudige wijze apparatuur met DIN-rail in een standaard 19" rack

Uw prijs
€145,99 EUR excl. VAT
€176,65 EUR incl. VAT
GC98FF

DB9 naar RJ45 modulaire adapter - F/F

Converteer uw DB9 mannelijke connector in een RJ45 vrouwelijke connector

Uw prijs
€3,99 EUR excl. VAT
€4,83 EUR incl. VAT

Drivers/Downloads

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Drivers:

Handleiding:

Datasheet

Productondersteuning

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Veelgestelde vragen (FAQ)

Installatie

Some driver installation packages may require you to disable driver signature enforcement in Windows 8, which will allow unsigned driver packages to be installed on your system.

Note: Before you continue, save any open documents and close all open programs.

To disable driver signature enforcement, complete the following:

  1. Press the Windows key + C.
  2. Click Settings > Change PC Settings.
  3. In the left pane, click General.
  4. In the right pane, under Advanced startup, click Restart now.

When your system finishes restarting, complete the following:

  1. Click Troubleshoot > Advanced options > Startup Settings > Restart.
  2. Press 7.

When your computer restarts, driver signature enforcement will be disabled and you can install your drivers.

Note: When you restart your computer after you install your drivers, driver signature enforcement will be enabled again. This does not prevent your newly installed drivers from working, but does prevent any other unsigned drivers from being installed until driver signature enforcement is disabled.

Some driver installation packages may require you to disable driver signature enforcement in Windows 8.1, which will allow unsigned driver packages to be installed on your system.

Note: Before you continue, save any open documents and close all open programs.

To disable driver signature enforcement, complete the following:

  1. Press the Windows key + C.
  2. Click Settings > Change PC Settings.
  3. In the left pane, click Update & Recovery.
  4. In the left pane, click Recovery.
  5. Under Advanced startup, click Restart now.

When your system finishes restarting, complete the following:

  1. Click Troubleshoot > Advanced options > Startup Settings > Restart.
  2. Press 7.

When your computer restarts, driver signature enforcement will be disabled and you can install your drivers.

Note: When you restart your computer after you install your drivers, driver signature enforcement will be enabled again. This does not prevent your newly installed drivers from working, but does prevent any other unsigned drivers from being installed until driver signature enforcement is disabled.­­­­­­­

You may need to disable Driver Signature Enforcement in Windows 10 to use some driver installation packages. When you disable this feature, you can install unsigned driver packages on your computer.

Note: Before you continue, save any open documents and close all of your programs. You will need to restart your computer to disable Driver Signature Enforcement.

To disable Driver Signature Enforcement, complete the following:

  1. Click the Windows icon in the taskbar.
  2. Click Power.
  3. Press and hold the Shift key and click Restart.

After your computer finishes restarting, complete the following:

  1. Click Troubleshoot Advanced Options Startup Settings > Restart.
  2. Press 7.   

When your computer finishes restarting, Driver Signature Enforcement will be disabled and you can install the drivers.

Note: When you restart your computer after you install your drivers, driver signature enforcement will be enabled again. This does not prevent your newly installed drivers from working, but does prevent any other unsigned drivers from being installed until driver signature enforcement is disabled.­­­­­­­

Troubleshooting

If the USB device does not work after your computer has been in extended hibernation, it is likely that Windows has automatically turned off the USB Root hub to save power. 

The steps below outline how to configure the USB root hub to stay on during hibernation, to prevent this from happening.
 

Windows 10 / 8

  1. On your keyboard, press the Windows key + X and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows 7 / Vista

  1. Click the Start button and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows XP

  1. On your desktop, right-click the My Computer icon and select Properties.
  2. Click the Device Manager tab.
  3. Expand Universal Serial Bus controllers by clicking the arrow to the left of it.
  4. Right-click the first USB Root Hub device and select Properties.
  5. Click the Power Management tab.
  6. Clear the box next to Allow the computer to turn off this device to save power.
  7. Click OK to apply the setting.
  8. Repeat steps 4-7 for any remaining devices in the Universal Serial Bus Controllers section with “Root Hub” in the name.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Hoe gaat u te werk

To confirm that Windows detects your USB device, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

To confirm that the Mac OS detects your USB device, complete the following:

  1. Click the Apple icon.
  2. Click About This Mac.
  3. Click More Info or System Report.
  4. Under the appropriate heading, confirm that your USB device is listed and that there isn't an error. For example, a network card would be under Ethernet Cards.

You may need to refresh the System Information page after you plug in your device.  To do so, press Command R with the System Information page open.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Uitvoering en specificaties van het product zijn zonder aankondiging vatbaar voor wijzigingen.
Wacht...
Terug naar boven