Niet meer leverbaar

1 Port PCI Dual Voltage Parallel Adapter Card

Voeg een dual-voltage high-speed parallelle poort (EPP/ECP) toe aan uw computer via een PCI-uitbreidingsslot

Productcode: PCI1PECPDV

  • Supports 3.3 and 5V PCI slots
  • Maximum data transfer rate of 1.5 Mbps
  • Standard and low-profile bracket included

The PCI1PECPDV PCI Dual Voltage EPP/ECP Parallel Adapter Card adds an IEEE 1284 port to your PC using either a PCI 5V or PCI-X 3.3v slot, with support for data transfer speeds of up to 1.5 Mbps – up to 3 times faster than built-in parallel ports.

The adapter card supports a broad range of operating systems including Windows®, DOS® and Linux® for easy installation into mixed environments. Plus, IRQ sharing and plug and play capabilities guarantee convenient, hassle-free connections to any parallel peripheral.

This PCI Parallel adapter card is a complete dual profile solution, providing both a standard bracket and a low profile/half-height bracket for adapting to slimline or small form-factor system applications.

Backed by a StarTech.com lifetime warranty and free lifetime technical support.

Toepassingen

  • Connects any parallel peripheral including printers, scanners, CD-R/RWs, Zip® drives, and memory card readers

Het voordeel van StarTech.com

  • Dual Voltage means the card works in both 3.3 and 5.0 volt PCI slots ensuring compatibility
  • Up to 3 times faster than legacy ISA or on-board parallel ports providing fast and reliable parallel communication
  • Standard and low profile bracket included allowing installation into almost any system

Partnernummers

  • UPC 065030821766

Compatibility

  • Windows 8 logo
  • Windows 7 logo
  • Linux logo
  • Windows Server 2012 logo
Windows® 8 (32/64), 7 (32/64), Vista (32/64), XP (32/64), 2000, ME, 98SE, 95
Windows Server® 2012, 2008 R2
Linux 2.4.x and up

Specificaties

Warranty Information Warranty Lifetime
Connector(en) 1 - Type connector(en) PCI / PCI-X (universeel 3,3 & 5 V, 32-bits)
1 - Externe poorten DB-25 (25-polig, D-Sub)
Fysieke eigenschappen Lengte product 12 cm [4,7 in]
Breedte product 20 mm [0,8 in]
Hoogte product 12 cm [4,7 in]
Gewicht product 60 g [2,1 oz]
Hardware Poorten 1
Interface Parallel
Bus type PCI / PCI-X (5 / 3.3V)
Kaarttype Standaard bracket (incl. low profile bracket)
Poorttype Geïntegreerd op kaart
Chipsetcode PLX/Oxford - OX16PCI952
Prestaties Maximale overdrachtsnelheid 1.5 Mbps
Software Besturingssystemen Windows® 8 (32/64), 7 (32/64), Vista (32/64), XP (32/64), 2000, ME, 98SE, 95
Windows Server® 2012, 2008 R2
Linux 2.4.x and up
Verpakkingsinformatie Package Length 14,8 cm [5,8 in]
Package Width 58 mm [2,3 in]
Package Height 19,5 cm [7,7 in]
Verzendgewicht (verpakt) 140 g [4,9 oz]
Wat wordt er meegeleverd 1 - Meegeleverd PCI Parallel Card
Low Profile Bracket
Driver CD
Instruction Manual

Accessoires

AT925FM

DB9 naar DB25 seriële adapterkabel - F/M

Verander een DB9 mannelijke poort in een DB25 mannelijke poort

Uw prijs
€3,99 EUR excl. VAT
€4,83 EUR incl. VAT
AT925FF

DB9-naar-DB25 seriële kabeladapter - F/F

Verandert een DB9 mannelijke poort in een DB25 vrouwelijke poort

Uw prijs
€3,99 EUR excl. VAT
€4,83 EUR incl. VAT

Drivers/Downloads

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Handleiding:

Datasheet

Productondersteuning

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Veelgestelde vragen (FAQ)

Troubleshooting

When you troubleshoot issues with a parallel device, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Parallel cables

  • Parallel ports

  • Parallel devices

To test your setup components, try the following:

  • Use the parallel cable, parallel port, and parallel device in another setup to see if the problem is with the components or the setup.

  • Use a different parallel cable, parallel port, and parallel device in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the parallel ports and parallel device, it is recommended that you do the following:

Note: Some parallel devices only work if the LPT port number is between a certain range, usually LPT1 or LPT2.

Hoe gaat u te werk

To confirm that Windows detects your expansion card, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Uitvoering en specificaties van het product zijn zonder aankondiging vatbaar voor wijzigingen.
Terug naar boven
Wacht...